lkml.org 
[lkml]   [2021]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 5/5] staging: vchiq: Combine vchiq platform code into single file
From
Date
Am 04.07.21 um 17:59 schrieb Ojaswin Mujoo:
> Combine the vchiq platform initialization code into a single file by
> merging vchiq_2835_arm.c into vchiq_arm.c
>
> Signed-off-by: Ojaswin Mujoo <ojaswin98@gmail.com>
> ---
> drivers/staging/vc04_services/Makefile | 1 -
> .../interface/vchiq_arm/vchiq_2835_arm.c | 564 ------------------
> .../interface/vchiq_arm/vchiq_arm.c | 549 +++++++++++++++++
> 3 files changed, 549 insertions(+), 565 deletions(-)
> delete mode 100644 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
>
> diff --git a/drivers/staging/vc04_services/Makefile b/drivers/staging/vc04_services/Makefile
> index 0a04338fc962..1fd191e2e2a5 100644
> --- a/drivers/staging/vc04_services/Makefile
> +++ b/drivers/staging/vc04_services/Makefile
> @@ -4,7 +4,6 @@ obj-$(CONFIG_BCM2835_VCHIQ) += vchiq.o
> vchiq-objs := \
> interface/vchiq_arm/vchiq_core.o \
> interface/vchiq_arm/vchiq_arm.o \
> - interface/vchiq_arm/vchiq_2835_arm.o \
> interface/vchiq_arm/vchiq_debugfs.o \
> interface/vchiq_arm/vchiq_connected.o \
>
...
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> index 0f2de571eba7..9057d01ffd48 100644
> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> @@ -25,15 +25,32 @@
> #include <linux/rcupdate.h>
> #include <linux/delay.h>
> #include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/uaccess.h>
> #include <soc/bcm2835/raspberrypi-firmware.h>
>
> #include "vchiq_core.h"
> #include "vchiq_ioctl.h"
> #include "vchiq_arm.h"
> #include "vchiq_debugfs.h"
> +#include "vchiq_connected.h"
> +#include "vchiq_pagelist.h"
>
> #define DEVICE_NAME "vchiq"
>
> +#define TOTAL_SLOTS (VCHIQ_SLOT_ZERO_SLOTS + 2 * 32)
> +
> +#define MAX_FRAGMENTS (VCHIQ_NUM_CURRENT_BULKS * 2)
> +
> +#define VCHIQ_PLATFORM_FRAGMENTS_OFFSET_IDX 0
> +#define VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX 1
> +
> +#define BELL0 0x00
> +#define BELL2 0x08
> +
> +#define ARM_DS_ACTIVE BIT(2)
> +
> /* Override the default prefix, which would be vchiq_arm (from the filename) */
> #undef MODULE_PARAM_PREFIX
> #define MODULE_PARAM_PREFIX DEVICE_NAME "."
> @@ -59,10 +76,542 @@ static struct vchiq_drvdata bcm2836_drvdata = {
> .cache_line_size = 64,
> };
>
> +struct vchiq_2835_state {
> + int inited;
> + struct vchiq_arm_state arm_state;
> +};
> +
> +struct vchiq_pagelist_info {
> + struct pagelist *pagelist;
> + size_t pagelist_buffer_size;
> + dma_addr_t dma_addr;
> + enum dma_data_direction dma_dir;
> + unsigned int num_pages;
> + unsigned int pages_need_release;
> + struct page **pages;
> + struct scatterlist *scatterlist;
> + unsigned int scatterlist_mapped;
> +};
> +
> +static void __iomem *g_regs;
> +/* This value is the size of the L2 cache lines as understood by the
> + * VPU firmware, which determines the required alignment of the
> + * offsets/sizes in pagelists.
> + *
> + * Modern VPU firmware looks for a DT "cache-line-size" property in
> + * the VCHIQ node and will overwrite it with the actual L2 cache size,
> + * which the kernel must then respect. That property was rejected
> + * upstream, so we have to use the VPU firmware's compatibility value
> + * of 32.
> + */
> +static unsigned int g_cache_line_size = 32;
> +static unsigned int g_fragments_size;
> +static char *g_fragments_base;
> +static char *g_free_fragments;
> +static struct semaphore g_free_fragments_sema;
> +static struct device *g_dev;
> +
> +static DEFINE_SEMAPHORE(g_free_fragments_mutex);
> +
> +static irqreturn_t
> +vchiq_doorbell_irq(int irq, void *dev_id);
> +
> +static struct vchiq_pagelist_info *
> +create_pagelist(char *buf, char __user *ubuf, size_t count, unsigned short type);
> +
> +static void
> +free_pagelist(struct vchiq_pagelist_info *pagelistinfo,
> + int actual);

please no forward declarations of these 3 functions. Put them into the
right order instead ...

Since this patch is independent from the other ones from the series,
maybe Greg can merg the rest of the series.



\
 
 \ /
  Last update: 2021-07-11 12:51    [W:0.912 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site