lkml.org 
[lkml]   [2021]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v1] drm/msm/disp/dpu1: add safe lut config in dpu driver
On 2021-07-09 16:10, Kalyan Thota wrote:
> Add safe lut configuration for all the targets in dpu
> driver as per QOS recommendation.
>
> Issue reported on SC7280:
>
> With wait-for-safe feature in smmu enabled, RT client
> buffer levels are checked to be safe before smmu invalidation.
> Since display was always set to unsafe it was delaying the
> invalidaiton process thus impacting the performance on NRT clients
> such as eMMC and NVMe.
>
> Validated this change on SC7280, With this change eMMC performance
> has improved significantly.
>
> Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index d01c4c9..2e482cd 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -974,6 +974,7 @@ static const struct dpu_perf_cfg sdm845_perf_data =
> {
> .amortizable_threshold = 25,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xf, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff0, 0xf000, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sdm845_qos_linear),
> .entries = sdm845_qos_linear
> @@ -1001,6 +1002,7 @@ static const struct dpu_perf_cfg sc7180_perf_data
> = {
> .min_dram_ib = 1600000,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xff, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> .entries = sc7180_qos_linear
> @@ -1028,6 +1030,7 @@ static const struct dpu_perf_cfg sm8150_perf_data
> = {
> .min_dram_ib = 800000,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xf, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff8, 0xf000, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sm8150_qos_linear),
> .entries = sm8150_qos_linear
> @@ -1056,6 +1059,7 @@ static const struct dpu_perf_cfg sm8250_perf_data
> = {
> .min_dram_ib = 800000,
> .min_prefill_lines = 35,
> .danger_lut_tbl = {0xf, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> .entries = sc7180_qos_linear
> @@ -1084,6 +1088,7 @@ static const struct dpu_perf_cfg sc7280_perf_data
> = {
> .min_dram_ib = 1600000,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xffff, 0xffff, 0x0},
> + .safe_lut_tbl = {0xff00, 0xff00, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
> .entries = sc7180_qos_macrotile

Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
(sc7280, sc7180)

This will need fixes and stable tag and I think this should also fix the
wait-for-safe issue with sdm845 (ufs/usb speed slowdown with display
active)
which we have in arm-smmu-qcom.

Thanks,
Sai

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member
of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2021-07-12 05:42    [W:0.040 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site