lkml.org 
[lkml]   [2021]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/4] iio: adc: ad7949: fix spi messages on non 14-bit controllers
From
On Sat Jul 10, 2021 at 12:39 PM EDT, Jonathan Cameron wrote:
> On Fri, 9 Jul 2021 11:58:54 -0400
> Liam Beguin <liambeguin@gmail.com> wrote:
>
> > From: Liam Beguin <lvb@xiphos.com>
> >
> > This driver supports devices with 14-bit and 16-bit sample sizes.
> > This is not always handled properly by spi controllers and can fail. To
> > work around this limitation, pad samples to 16-bit and split the sample
> > into two 8-bit messages in the event that only 8-bit messages are
> > supported by the controller.
>
> Hmm. I assumed spi controllers would all support 16 bits, but a quick
> grep confirms otherwise... ah well!
>
> >
> > Signed-off-by: Liam Beguin <lvb@xiphos.com>
> > ---
> > drivers/iio/adc/ad7949.c | 69 ++++++++++++++++++++++++++++++++++------
> > 1 file changed, 60 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c
> > index 93aacf4f680b..770112ac820f 100644
> > --- a/drivers/iio/adc/ad7949.c
> > +++ b/drivers/iio/adc/ad7949.c
> > @@ -11,6 +11,7 @@
> > #include <linux/module.h>
> > #include <linux/regulator/consumer.h>
> > #include <linux/spi/spi.h>
> > +#include <linux/bitfield.h>
> >
> > #define AD7949_MASK_TOTAL GENMASK(13, 0)
> > #define AD7949_CFG_REG_SIZE_BITS 14
> > @@ -57,6 +58,7 @@ static const struct ad7949_adc_spec ad7949_adc_spec[] = {
> > * @indio_dev: reference to iio structure
> > * @spi: reference to spi structure
> > * @resolution: resolution of the chip
> > + * @bits_per_word: number of bits per SPI word
> > * @cfg: copy of the configuration register
> > * @current_channel: current channel in use
> > * @buffer: buffer to send / receive data to / from device
> > @@ -67,28 +69,60 @@ struct ad7949_adc_chip {
> > struct iio_dev *indio_dev;
> > struct spi_device *spi;
> > u8 resolution;
> > + u8 bits_per_word;
> > u16 cfg;
> > unsigned int current_channel;
> > - u16 buffer ____cacheline_aligned;
> > + union {
> > + __be16 buffer;
> > + u8 buf8[2];
> > + } ____cacheline_aligned;

Hi Jonathan,

>
> This union made me a little nervous given issues with them under c spec,
> but
> seems that you only use buffer or buf8, there is no mixing. I think I'd
> rather you didn't have the union though as it makes it look like there
> might be.

I don't particularly like unions either..
If I'm not mistaken, the only place where the union is useful is
in the spi_transfer struct definitions. I'll use a local buf8 there
instead.

>
> Given we are doing cacheline spacing anyway for dma safety it take no
> more
> real space to just have
>
> __be16 buffer ____cacheline_aligned;
> buf8[2];
>
>
>
> > };
> >
> > +static void ad7949_set_bits_per_word(struct ad7949_adc_chip *ad7949_adc)
> > +{
> > + u32 adc_mask = SPI_BPW_MASK(ad7949_adc->resolution);
> > + u32 bpw = adc_mask & ad7949_adc->spi->controller->bits_per_word_mask;
> > +
> > + if (bpw == adc_mask)
>
> if (bpw) is sufficient I think.
>
> > + ad7949_adc->bits_per_word = ad7949_adc->resolution;
> > + else if (bpw == SPI_BPW_MASK(16))
>
> I'm missing something here... If the resolution is 14, but the SPI
> controller
> supports 8 and 16 I'd expect us to hit here . adc_mask will not have the
> 16bit
> bit set though so bpw == 0..
>
> else if (ad7949_adc->spi->controller_bits_per_word_mask &
> SPI_BPW_MASK(16))
>
> should do the right thing.
>
> > + ad7949_adc->bits_per_word = 16;
> > + else
> > + ad7949_adc->bits_per_word = 8;
>
> I'd like a comment here on why this is the right default. Took me a
> while
> to think through it.
>

I'll rework this function based on your comments and fail early on
unsupported cases.

> > +}
> > +
> > static int ad7949_spi_write_cfg(struct ad7949_adc_chip *ad7949_adc, u16 val,
> > u16 mask)
> > {
> > int ret;
> > - int bits_per_word = ad7949_adc->resolution;
> > - int shift = bits_per_word - AD7949_CFG_REG_SIZE_BITS;
> > struct spi_message msg;
> > struct spi_transfer tx[] = {
> > {
> > .tx_buf = &ad7949_adc->buffer,
> > .len = 2,
> > - .bits_per_word = bits_per_word,
> > + .bits_per_word = ad7949_adc->bits_per_word,
> > },
> > };
> >
> > + ad7949_adc->buffer = 0;
> > ad7949_adc->cfg = (val & mask) | (ad7949_adc->cfg & ~mask);
> > - ad7949_adc->buffer = ad7949_adc->cfg << shift;
> > +
> > + switch (ad7949_adc->bits_per_word) {
> > + case 16:
> > + ad7949_adc->buffer = ad7949_adc->cfg << 2;
> > + break;
> > + case 14:
> > + ad7949_adc->buffer = ad7949_adc->cfg;
> > + break;
> > + case 8:
> > + default:
>
> Default here should be an error. Imagine a 12 bit device is added. Then
> the above set_bits_per_word() might return either 12 or 8. If it returns
> 12 then this is not the right thing to do. I'd argue we want to know
> about
> that rather than papering over it. Possibly we want to not let anything
> other
> than 14 bits through in set_bits_per_word() so we print an error
> early...
>

Sorry about that, I added that default case maybe a little too quickly.
I'll fix that.

> > + /* Pack 14-bit value into 2 bytes, MSB first */
> > + ad7949_adc->buf8[0] = FIELD_GET(GENMASK(13, 6), ad7949_adc->cfg);
> > + ad7949_adc->buf8[1] = FIELD_GET(GENMASK(5, 0), ad7949_adc->cfg);
> > + ad7949_adc->buf8[1] = ad7949_adc->buf8[1] << 2;
> > + break;
> > + }
> > +
> > spi_message_init_with_transfers(&msg, tx, 1);
> > ret = spi_sync(ad7949_adc->spi, &msg);
> >
> > @@ -105,14 +139,12 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
> > {
> > int ret;
> > int i;
> > - int bits_per_word = ad7949_adc->resolution;
> > - int mask = GENMASK(ad7949_adc->resolution - 1, 0);
> > struct spi_message msg;
> > struct spi_transfer tx[] = {
> > {
> > .rx_buf = &ad7949_adc->buffer,
> > .len = 2,
> > - .bits_per_word = bits_per_word,
> > + .bits_per_word = ad7949_adc->bits_per_word,
> > },
> > };
> >
> > @@ -147,7 +179,25 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
> >
> > ad7949_adc->current_channel = channel;
> >
> > - *val = ad7949_adc->buffer & mask;
> > + switch (ad7949_adc->bits_per_word) {
> > + case 16:
> > + *val = ad7949_adc->buffer;
>
> buffer is __be16 and *val is an int so this isn't valid.
>
> Now curious bit is I'm assuming original code worked... Given big endian
> platforms are rare, that makes me suspect something odd is going on.
>

Hum... that's probably my fault. I changed the type of buffer from u16
to _be16.
I'll add calls to be16_to_cpu() around this and the 14 bit case.

> > + /* Shift-out padding bits */
> > + if (ad7949_adc->resolution == 14)
> > + *val = *val >> 2;
>
> *val >>= 16 - ad7949_adc->resolution;
>
> No one likes conditionals if we don't need them!

Will do.

>
>
> > + break;
> > + case 14:
> > + *val = ad7949_adc->buffer & GENMASK(13, 0);
> > + break;
> > + case 8:
> > + default:
> > + /* Convert byte array to u16, MSB first */
> > + *val = (ad7949_adc->buf8[0] << 8) | ad7949_adc->buf8[1];
>
> Use unaligned_get_be16()
>
> > + /* Shift-out padding bits */
> > + if (ad7949_adc->resolution == 14)
> > + *val = *val >> 2;
>
> As above make this unconditional.
>

Thanks,
Liam

> > + break;
> > + }
> >
> > return 0;
> > }
> > @@ -280,6 +330,7 @@ static int ad7949_spi_probe(struct spi_device *spi)
> > spec = &ad7949_adc_spec[spi_get_device_id(spi)->driver_data];
> > indio_dev->num_channels = spec->num_channels;
> > ad7949_adc->resolution = spec->resolution;
> > + ad7949_set_bits_per_word(ad7949_adc);
> >
> > ad7949_adc->vref = devm_regulator_get(dev, "vref");
> > if (IS_ERR(ad7949_adc->vref)) {

\
 
 \ /
  Last update: 2021-07-11 21:58    [W:1.107 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site