Messages in this thread | | | From | Chun-Kuang Hu <> | Date | Sun, 11 Jul 2021 09:21:44 +0800 | Subject | Re: [PATCH v2 1/9] dt-bindings: mediatek: add definition for mt8195 display |
| |
Hi, Jason:
jason-jh.lin <jason-jh.lin@mediatek.com> 於 2021年7月10日 週六 下午7:38寫道: > > Add definition for mt8195 display. > > Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com> > --- > .../bindings/display/mediatek/mediatek,disp.txt | 9 +++++++-- > 1 file changed, 7 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt > index fbb59c9ddda6..de6226d4bca3 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt > @@ -37,6 +37,7 @@ Required properties (all function blocks): > "mediatek,<chip>-disp-aal" - adaptive ambient light controller > "mediatek,<chip>-disp-gamma" - gamma correction > "mediatek,<chip>-disp-merge" - merge streams from two RDMA sources > + "mediatek,<chip>-disp-dsc" - DSC controller, see mediatek,dsc.yaml
You add dsc binding document in yaml format, so I would like you to change this binding document to yaml format.
Regards, Chun-Kuang.
> "mediatek,<chip>-disp-postmask" - control round corner for display frame > "mediatek,<chip>-disp-split" - split stream to two encoders > "mediatek,<chip>-disp-ufoe" - data compression engine > @@ -44,7 +45,7 @@ Required properties (all function blocks): > "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt > "mediatek,<chip>-disp-mutex" - display mutex > "mediatek,<chip>-disp-od" - overdrive > - the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173, mt8183 and mt8192. > + the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173, mt8183, mt8192 and mt8195. > - reg: Physical base address and length of the function block register space > - interrupts: The interrupt signal from the function block (required, except for > merge and split function blocks). > @@ -60,7 +61,7 @@ Required properties (DMA function blocks): > "mediatek,<chip>-disp-ovl" > "mediatek,<chip>-disp-rdma" > "mediatek,<chip>-disp-wdma" > - the supported chips are mt2701, mt8167 and mt8173. > + the supported chips are mt2701, mt8167, mt8173 and mt8195. > - larb: Should contain a phandle pointing to the local arbiter device as defined > in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml > - iommus: Should point to the respective IOMMU block with master port as > @@ -217,3 +218,7 @@ od@14023000 { > power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; > clocks = <&mmsys CLK_MM_DISP_OD>; > }; > + > +dsc0: disp_dsc_wrap@1c009000 { > + /* See mediatek,dsc.yaml for details */ > +}; > -- > 2.18.0 >
| |