lkml.org 
[lkml]   [2021]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v7 27/37] spi: tegra20-slink: Add OPP support
    Date
    The SPI on Tegra belongs to the core power domain and we're going to
    enable GENPD support for the core domain. Now SPI driver must use OPP
    API for driving the controller's clock rate because OPP API takes care
    of reconfiguring the domain's performance state in accordance to the
    rate. Add OPP support to the driver.

    Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
    ---
    drivers/spi/spi-tegra20-slink.c | 9 ++++++++-
    1 file changed, 8 insertions(+), 1 deletion(-)

    diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
    index cbf0b4a0820a..87b850e45863 100644
    --- a/drivers/spi/spi-tegra20-slink.c
    +++ b/drivers/spi/spi-tegra20-slink.c
    @@ -18,12 +18,15 @@
    #include <linux/kthread.h>
    #include <linux/module.h>
    #include <linux/platform_device.h>
    +#include <linux/pm_opp.h>
    #include <linux/pm_runtime.h>
    #include <linux/of.h>
    #include <linux/of_device.h>
    #include <linux/reset.h>
    #include <linux/spi/spi.h>

    +#include <soc/tegra/common.h>
    +
    #define SLINK_COMMAND 0x000
    #define SLINK_BIT_LENGTH(x) (((x) & 0x1f) << 0)
    #define SLINK_WORD_SIZE(x) (((x) & 0x1f) << 5)
    @@ -683,7 +686,7 @@ static int tegra_slink_start_transfer_one(struct spi_device *spi,
    bits_per_word = t->bits_per_word;
    speed = t->speed_hz;
    if (speed != tspi->cur_speed) {
    - clk_set_rate(tspi->clk, speed * 4);
    + dev_pm_opp_set_rate(tspi->dev, speed * 4);
    tspi->cur_speed = speed;
    }

    @@ -1054,6 +1057,10 @@ static int tegra_slink_probe(struct platform_device *pdev)
    goto exit_free_master;
    }

    + ret = devm_tegra_core_dev_init_opp_table_simple(&pdev->dev);
    + if (ret)
    + return ret;
    +
    /* disabled clock may cause interrupt storm upon request */
    tspi->clk = devm_clk_get(&pdev->dev, NULL);
    if (IS_ERR(tspi->clk)) {
    --
    2.30.2
    \
     
     \ /
      Last update: 2021-07-02 01:31    [W:4.246 / U:0.048 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site