Messages in this thread Patch in this message | | | From | Qing Zhang <> | Subject | [PATCH v8 2/3] MIPS: Loongson64: DTS: Add pm block node for Loongson-2K1000 | Date | Thu, 1 Jul 2021 21:13:59 +0800 |
| |
The module is now supported, enable it.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn> ---
v7-v8: No change --- arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi index 5747f171de29..6004400bb689 100644 --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi @@ -52,6 +52,11 @@ package0: bus@10000000 { 0 0x40000000 0 0x40000000 0 0x40000000 0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>; + pm: power-controller@1fe07000 { + compatible = "loongson,ls2k-pm"; + reg = <0 0x1fe07000 0 0x422>; + }; + liointc0: interrupt-controller@1fe11400 { compatible = "loongson,liointc-2.0"; reg = <0 0x1fe11400 0 0x40>, -- 2.31.0
| |