lkml.org 
[lkml]   [2021]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH 2/3] usb: renesas_usbhs: Enable support for more than two clks
Date
Hi Adam, Geert-san,

> From: Geert Uytterhoeven, Sent: Thursday, July 1, 2021 6:07 PM
<snip>
> To: Adam Ford <aford173@gmail.com>
> Cc: USB list <linux-usb@vger.kernel.org>; Adam Ford-BE <aford@beaconembedded.com>; Greg Kroah-Hartman
> <gregkh@linuxfoundation.org>; Rob Herring <robh+dt@kernel.org>; Magnus Damm <magnus.damm@gmail.com>; Yoshihiro Shimoda
> <yoshihiro.shimoda.uh@renesas.com>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
> <devicetree@vger.kernel.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; Linux-Renesas
> <linux-renesas-soc@vger.kernel.org>
> Subject: Re: [PATCH 2/3] usb: renesas_usbhs: Enable support for more than two clks
>
> Hi Adam,
>
> Thanks for your patch!
>
> On Wed, Jun 30, 2021 at 7:30 PM Adam Ford wrote:
<snip>
> > diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
> > index 3af91b2b8f76..255e4bd68ed3 100644
> > --- a/drivers/usb/renesas_usbhs/common.c
> > +++ b/drivers/usb/renesas_usbhs/common.c
<snip>
> > @@ -309,11 +311,13 @@ static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv)
> > * To backward compatibility with old DT, this driver checks the return
> > * value if it's -ENOENT or not.
> > */
> > - priv->clks[1] = of_clk_get(dev_of_node(dev), 1);
> > - if (PTR_ERR(priv->clks[1]) == -ENOENT)
> > - priv->clks[1] = NULL;
> > - else if (IS_ERR(priv->clks[1]))
> > - return PTR_ERR(priv->clks[1]);
> > + for (i = 1; i < ARRAY_SIZE(priv->clks); i++) {
> > + priv->clks[1] = of_clk_get(dev->of_node, i);

s/clks[1]/[i]/

> > + if (PTR_ERR(priv->clks[i]) == -ENOENT)
> > + priv->clks[i] = NULL;
> > + else if (IS_ERR(priv->clks[i]))
> > + return PTR_ERR(priv->clks[i]);
> > + }
>
> This is identical to the current code, as ARRAY_SIZE(priv->clks) == 2.
> Probably you wanted to increase usbhs_priv.clks[], too?

I think so.
# I realized the clks array is only 2, so that this driver cannot
# enable usb2_clksel...

> Does it make sense to start using the clk_bulk*() API?

clk_bulk*() API seems to need clock-names property.
Is my understanding correct? However, the hsusb nodes doesn't
have the property for now...

Best regards,
Yoshihiro Shimoda

\
 
 \ /
  Last update: 2021-07-01 13:35    [W:0.084 / U:1.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site