lkml.org 
[lkml]   [2021]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 06/16] firmware: arm_scmi, smccc, mailbox: Make shmem based transports optional
Date
On 11.06.21 18:59, Cristian Marussi wrote:
> From: Igor Skalkin <igor.skalkin@opensynergy.com>
>
> Upon adding the virtio transport in this patch series, SCMI will also
> work without shared memory based transports. Also, the mailbox transport
> may not be needed if the smc transport is used.
>
> - Compile shmem.c only if a shmem based transport is available.
>
> - Remove hard dependency of SCMI on mailbox.

The hard dependency has now already been removed with

c05b07963e96 ("firmware: arm_scmi: Add SMCCC discovery dependency in")

>
> [ Peter: Adapted patch for submission to upstream. ]
>
> Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com>
> Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com>
> Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
> ---
> drivers/firmware/Kconfig | 8 +++++++-
> drivers/firmware/arm_scmi/Makefile | 2 +-
> drivers/firmware/arm_scmi/common.h | 2 ++
> drivers/firmware/smccc/Kconfig | 1 +
> drivers/mailbox/Kconfig | 1 +
> 5 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index 1db738d5b301..358f895847b5 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -9,7 +9,7 @@ menu "Firmware Drivers"
> config ARM_SCMI_PROTOCOL
> tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
> depends on ARM || ARM64 || COMPILE_TEST
> - depends on MAILBOX || HAVE_ARM_SMCCC_DISCOVERY
> + depends on ARM_SCMI_HAVE_SHMEM
> help
> ARM System Control and Management Interface (SCMI) protocol is a
> set of operating system-independent software interfaces that are
> @@ -27,6 +27,12 @@ config ARM_SCMI_PROTOCOL
> This protocol library provides interface for all the client drivers
> making use of the features offered by the SCMI.
>
> +config ARM_SCMI_HAVE_SHMEM
> + bool
> + help
> + This declares whether a shared memory based transport for SCMI is
> + available.
> +
> config ARM_SCMI_POWER_DOMAIN
> tristate "SCMI power domain driver"
> depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
> diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
> index 6a2ef63306d6..5a2d4c32e0ae 100644
> --- a/drivers/firmware/arm_scmi/Makefile
> +++ b/drivers/firmware/arm_scmi/Makefile
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0-only
> scmi-bus-y = bus.o
> scmi-driver-y = driver.o notify.o
> -scmi-transport-y = shmem.o
> +scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o
> scmi-transport-$(CONFIG_MAILBOX) += mailbox.o
> scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o
> scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o
> diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
> index 0edc04bc434c..4666777019fa 100644
> --- a/drivers/firmware/arm_scmi/common.h
> +++ b/drivers/firmware/arm_scmi/common.h
> @@ -375,7 +375,9 @@ struct scmi_desc {
> bool support_xfers_delegation;
> };
>
> +#ifdef CONFIG_MAILBOX
> extern const struct scmi_desc scmi_mailbox_desc;
> +#endif
> #ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
> extern const struct scmi_desc scmi_smc_desc;
> #endif
> diff --git a/drivers/firmware/smccc/Kconfig b/drivers/firmware/smccc/Kconfig
> index 15e7466179a6..69c4d6cabf62 100644
> --- a/drivers/firmware/smccc/Kconfig
> +++ b/drivers/firmware/smccc/Kconfig
> @@ -9,6 +9,7 @@ config HAVE_ARM_SMCCC_DISCOVERY
> bool
> depends on ARM_PSCI_FW
> default y
> + select ARM_SCMI_HAVE_SHMEM
> help
> SMCCC v1.0 lacked discoverability and hence PSCI v1.0 was updated
> to add SMCCC discovery mechanism though the PSCI firmware
> diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
> index 68de2c6af727..fc02c38c0739 100644
> --- a/drivers/mailbox/Kconfig
> +++ b/drivers/mailbox/Kconfig
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0-only
> menuconfig MAILBOX
> bool "Mailbox Hardware Support"
> + select ARM_SCMI_HAVE_SHMEM
> help
> Mailbox is a framework to control hardware communication between
> on-chip processors through queued messages and interrupt driven
>



\
 
 \ /
  Last update: 2021-07-01 10:43    [W:2.012 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site