lkml.org 
[lkml]   [2021]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v11 04/33] counter: 104-quad-8: Return error when invalid mode during ceiling_write
On Wed,  9 Jun 2021 10:31:07 +0900
William Breathitt Gray <vilhelm.gray@gmail.com> wrote:

> The 104-QUAD-8 only has two count modes where a ceiling value makes
> sense: Range Limit and Modulo-N. Outside of these two modes, setting a
> ceiling value is an invalid operation -- so let's report it as such by
> returning -EINVAL.
>
> Fixes: fc069262261c ("counter: 104-quad-8: Add lock guards - generic interface")
> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>

We seem to have some inconsistency in the driver about whether
we hold the priv->lock when calling quad8_preset_register_set()

Can we look to make that consistent?

> ---
> drivers/counter/104-quad-8.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
> index 4bb9abffae48..233a3acc1377 100644
> --- a/drivers/counter/104-quad-8.c
> +++ b/drivers/counter/104-quad-8.c
> @@ -714,13 +714,14 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
> switch (priv->count_mode[count->id]) {
> case 1:
> case 3:
> + mutex_unlock(&priv->lock);

Probably swap this line and the next one...]

> quad8_preset_register_set(priv, count->id, ceiling);
> - break;
> + return len;
> }
>
> mutex_unlock(&priv->lock);
>
> - return len;
> + return -EINVAL;
> }
>
> static ssize_t quad8_count_preset_enable_read(struct counter_device *counter,

\
 
 \ /
  Last update: 2021-06-09 17:11    [W:0.270 / U:3.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site