lkml.org 
[lkml]   [2021]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] memory-hotplug.rst: complete admin-guide overhaul
On Tue, Jun 08, 2021 at 03:38:55PM +0200, David Hildenbrand wrote:
> The memory hot(un)plug documentation is outdated and incomplete. Most of
> the content dates back to 2007, so it's time for a major overhaul.
>
> Let's rewrite, reorganize and update most parts of the documentation. In
> addition to memory hot(un)plug, also add some details regarding
> ZONE_MOVABLE, with memory hotunplug being one of its main consumers.
>
> Drop the file history, that information can more reliably be had from
> the git log.
>
> The style of the document is also properly fixed that e.g., "restview"
> renders it cleanly now.
>
> In the future, we might add some more details about virt users like
> virtio-mem, the XEN balloon, the Hyper-V balloon and ppc64 dlpar.
>
> Acked-by: Michal Hocko <mhocko@suse.com>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: Oscar Salvador <osalvador@suse.de>
> Cc: Michal Hocko <mhocko@suse.com>
> Cc: Mike Kravetz <mike.kravetz@oracle.com>
> Cc: Mike Rapoport <rppt@kernel.org>
> Cc: Dave Hansen <dave.hansen@linux.intel.com>
> Cc: Matthew Wilcox <willy@infradead.org>
> Cc: Anshuman Khandual <anshuman.khandual@arm.com>
> Cc: Muchun Song <songmuchun@bytedance.com>
> Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
> Cc: linux-doc@vger.kernel.org
> Signed-off-by: David Hildenbrand <david@redhat.com>

With the added patch:

Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>


> ---
> .../admin-guide/mm/memory-hotplug.rst | 754 +++++++++++-------
> 1 file changed, 448 insertions(+), 306 deletions(-)
>
> diff --git a/Documentation/admin-guide/mm/memory-hotplug.rst b/Documentation/admin-guide/mm/memory-hotplug.rst
> index a783cf7c8e4c..353b67e76439 100644
> --- a/Documentation/admin-guide/mm/memory-hotplug.rst
> +++ b/Documentation/admin-guide/mm/memory-hotplug.rst
> @@ -1,427 +1,569 @@
> .. _admin_guide_memory_hotplug:
>
> -==============
> -Memory Hotplug
> -==============
> +==================
> +Memory Hot(Un)Plug
> +==================
>
> -:Created: Jul 28 2007
> -:Updated: Add some details about locking internals: Aug 20 2018
> -
> -This document is about memory hotplug including how-to-use and current status.
> -Because Memory Hotplug is still under development, contents of this text will
> -be changed often.
> +This document describes generic Linux support for memory hot(un)plug with
> +a focus on System RAM, including ZONE_MOVABLE support.
>
> .. contents:: :local:
>
> -.. note::
> +Introduction
> +============
>
> - (1) x86_64's has special implementation for memory hotplug.
> - This text does not describe it.
> - (2) This text assumes that sysfs is mounted at ``/sys``.
> +Memory hot(un)plug allows for increasing and decreasing the size of physical
> +memory available to a machine at runtime. In the simplest case, it consists of
> +physically plugging or unplugging a DIMM at runtime, coordinated with the
> +operating system.
>
> +Memory hot(un)plug is used for various purposes:
>
> -Introduction
> -============
> +- The physical memory available to a machine can be adjusted at runtime, up- or
> + downgrading the memory capacity. This dynamic memory resizing, sometimes
> + referred to as "capacity on demand", is frequently used with virtual machines
> + and logical partitions.
> +
> +- Replacing hardware, such as DIMMs or whole NUMA nodes, without downtime. One
> + example is replacing failing memory modules.
>
> -Purpose of memory hotplug
> --------------------------
> +- Reducing energy consumption either by physically unplugging memory modules or
> + by logically unplugging (parts of) memory modules from Linux.
>
> -Memory Hotplug allows users to increase/decrease the amount of memory.
> -Generally, there are two purposes.
> +Further, the basic memory hot(un)plug infrastructure in Linux is nowadays also
> +used to expose persistent memory, other performance-differentiated memory and
> +reserved memory regions as ordinary system RAM to Linux.
>
> -(A) For changing the amount of memory.
> - This is to allow a feature like capacity on demand.
> -(B) For installing/removing DIMMs or NUMA-nodes physically.
> - This is to exchange DIMMs/NUMA-nodes, reduce power consumption, etc.
> +Linux only supports memory hot(un)plug on selected 64 bit architectures, such as
> +x86_64, aarch64, ppc64, s390x and ia64.
>
> -(A) is required by highly virtualized environments and (B) is required by
> -hardware which supports memory power management.
> +Memory Hot(Un)Plug Granularity
> +------------------------------
>
> -Linux memory hotplug is designed for both purpose.
> +Memory hot(un)plug in Linux uses the SPARSEMEM memory model, which divides the
> +physical memory address space into chunks of the same size: memory sections. The
> +size of a memory section is architecture dependent. For example, x86_64 uses
> +128 MiB and ppc64 uses 16 MiB.
>
> -Phases of memory hotplug
> +Memory sections are combined into chunks referred to as "memory blocks". The
> +size of a memory block is architecture dependent and corresponds to the smallest
> +granularity that can be hot(un)plugged. The default size of a memory block is
> +the same as memory section size, unless an architecture specifies otherwise.
> +
> +All memory blocks have the same size.
> +
> +Phases of Memory Hotplug
> ------------------------
>
> -There are 2 phases in Memory Hotplug:
> +Memory hotplug consists of two phases:
>
> - 1) Physical Memory Hotplug phase
> - 2) Logical Memory Hotplug phase.
> +(1) Adding the memory to Linux
> +(2) Onlining memory blocks
>
> -The First phase is to communicate hardware/firmware and make/erase
> -environment for hotplugged memory. Basically, this phase is necessary
> -for the purpose (B), but this is good phase for communication between
> -highly virtualized environments too.
> +In the first phase, metadata, such as the memory map ("memmap") and page tables
> +for the direct mapping, is allocated and initialized, and memory blocks are
> +created; the latter also creates sysfs files for managing newly created memory
> +blocks.
>
> -When memory is hotplugged, the kernel recognizes new memory, makes new memory
> -management tables, and makes sysfs files for new memory's operation.
> +In the second phase, added memory is exposed to the page allocator. After this
> +phase, the memory is visible in memory statistics, such as free and total
> +memory, of the system.
>
> -If firmware supports notification of connection of new memory to OS,
> -this phase is triggered automatically. ACPI can notify this event. If not,
> -"probe" operation by system administration is used instead.
> -(see :ref:`memory_hotplug_physical_mem`).
> +Phases of Memory Hotunplug
> +--------------------------
>
> -Logical Memory Hotplug phase is to change memory state into
> -available/unavailable for users. Amount of memory from user's view is
> -changed by this phase. The kernel makes all memory in it as free pages
> -when a memory range is available.
> +Memory hotunplug consists of two phases:
>
> -In this document, this phase is described as online/offline.
> +(1) Offlining memory blocks
> +(2) Removing the memory from Linux
>
> -Logical Memory Hotplug phase is triggered by write of sysfs file by system
> -administrator. For the hot-add case, it must be executed after Physical Hotplug
> -phase by hand.
> -(However, if you writes udev's hotplug scripts for memory hotplug, these
> -phases can be execute in seamless way.)
> +In the fist phase, memory is "hidden" from the page allocator again, for
> +example, by migrating busy memory to other memory locations and removing all
> +relevant free pages from the page allocator After this phase, the memory is no
> +longer visible in memory statistics of the system.
>
> -Unit of Memory online/offline operation
> ----------------------------------------
> +In the second phase, the memory blocks are removed and metadata is freed.
>
> -Memory hotplug uses SPARSEMEM memory model which allows memory to be divided
> -into chunks of the same size. These chunks are called "sections". The size of
> -a memory section is architecture dependent. For example, power uses 16MiB, ia64
> -uses 1GiB.
> +Memory Hotplug Notifications
> +============================
>
> -Memory sections are combined into chunks referred to as "memory blocks". The
> -size of a memory block is architecture dependent and represents the logical
> -unit upon which memory online/offline operations are to be performed. The
> -default size of a memory block is the same as memory section size unless an
> -architecture specifies otherwise. (see :ref:`memory_hotplug_sysfs_files`.)
> +There are various ways how Linux is notified about memory hotplug events such
> +that it can start adding hotplugged memory. This description is limited to
> +systems that support ACPI; mechanisms specific to other firmware interfaces or
> +virtual machines are not described.
>
> -To determine the size (in bytes) of a memory block please read this file::
> +ACPI Notifications
> +------------------
>
> - /sys/devices/system/memory/block_size_bytes
> +Platforms that support ACPI, such as x86_64, can support memory hotplug
> +notifications via ACPI.
>
> -Kernel Configuration
> -====================
> +In general, a firmware supporting memory hotplug defines a memory class object
> +HID "PNP0C80". When notified about hotplug of a new memory device, the ACPI
> +driver will hotplug the memory to Linux.
>
> -To use memory hotplug feature, kernel must be compiled with following
> -config options.
> +If the firmware supports hotplug of NUMA nodes, it defines an object _HID
> +"ACPI0004", "PNP0A05", or "PNP0A06". When notified about an hotplug event, all
> +assigned memory devices are added to Linux by the ACPI driver.
>
> -- For all memory hotplug:
> - - Memory model -> Sparse Memory (``CONFIG_SPARSEMEM``)
> - - Allow for memory hot-add (``CONFIG_MEMORY_HOTPLUG``)
> +Similarly, Linux can be notified about requests to hotunplug a memory device or
> +a NUMA node via ACPI. The ACPI driver will try offlining all relevant memory
> +blocks, and, if successful, hotunplug the memory from Linux.
>
> -- To enable memory removal, the following are also necessary:
> - - Allow for memory hot remove (``CONFIG_MEMORY_HOTREMOVE``)
> - - Page Migration (``CONFIG_MIGRATION``)
> +Manual Probing
> +--------------
>
> -- For ACPI memory hotplug, the following are also necessary:
> - - Memory hotplug (under ACPI Support menu) (``CONFIG_ACPI_HOTPLUG_MEMORY``)
> - - This option can be kernel module.
> +On some architectures, the firmware may not be able to notify the operating
> +system about a memory hotplug event. Instead, the memory has to be manually
> +probed from user space.
>
> -- As a related configuration, if your box has a feature of NUMA-node hotplug
> - via ACPI, then this option is necessary too.
> +The probe interface is located at::
>
> - - ACPI0004,PNP0A05 and PNP0A06 Container Driver (under ACPI Support menu)
> - (``CONFIG_ACPI_CONTAINER``).
> + /sys/devices/system/memory/probe
>
> - This option can be kernel module too.
> +Only complete memory blocks can be probed. Individual memory blocks are probed
> +by providing the physical start address of the memory block::
>
> + % echo addr > /sys/devices/system/memory/probe
>
> -.. _memory_hotplug_sysfs_files:
> +Which results in a memory block for the range [addr, addr + memory_block_size)
> +being created.
>
> -sysfs files for memory hotplug
> -==============================
> +.. note::
>
> -All memory blocks have their device information in sysfs. Each memory block
> -is described under ``/sys/devices/system/memory`` as::
> + Using the probe interface is discouraged as it is easy to crash the kernel,
> + because Linux cannot validate user input; this interface might be removed in
> + the future.
>
> - /sys/devices/system/memory/memoryXXX
> +Onlining and Offlining Memory Blocks
> +====================================
>
> -where XXX is the memory block id.
> +After a memory block has been created, Linux has to be instructed to actually
> +make use of that memory: the memory block has to be "online".
>
> -For the memory block covered by the sysfs directory. It is expected that all
> -memory sections in this range are present and no memory holes exist in the
> -range. Currently there is no way to determine if there is a memory hole, but
> -the existence of one should not affect the hotplug capabilities of the memory
> -block.
> +Before a memory block can be removed, Linux has to stop using any memory part of
> +the memory block: the memory block has to be "offlined".
>
> -For example, assume 1GiB memory block size. A device for a memory starting at
> -0x100000000 is ``/sys/device/system/memory/memory4``::
> +The Linux kernel can be configured to automatically online added memory blocks
> +and drivers automatically trigger offlining of memory blocks when trying
> +hotunplug of memory. Memory blocks can only be removed once offlining succeeded
> +and drivers may trigger offlining of memory blocks when attempting hotunplug of
> +memory.
>
> - (0x100000000 / 1Gib = 4)
> +Onlining Memory Blocks Manually
> +-------------------------------
>
> -This device covers address range [0x100000000 ... 0x140000000)
> +If auto-onlining of memory blocks isn't enabled, user-space has to manually
> +trigger onlining of memory blocks. Often, udev rules are used to automate this
> +task in user space.
>
> -Under each memory block, you can see 5 files:
> +Onlining of a memory block can be triggered via::
>
> -- ``/sys/devices/system/memory/memoryXXX/phys_index``
> -- ``/sys/devices/system/memory/memoryXXX/phys_device``
> -- ``/sys/devices/system/memory/memoryXXX/state``
> -- ``/sys/devices/system/memory/memoryXXX/removable``
> -- ``/sys/devices/system/memory/memoryXXX/valid_zones``
> + % echo online > /sys/devices/system/memory/memoryXXX/state
>
> -=================== ============================================================
> -``phys_index`` read-only and contains memory block id, same as XXX.
> -``state`` read-write
> +Or alternatively::
>
> - - at read: contains online/offline state of memory.
> - - at write: user can specify "online_kernel",
> + % echo 1 > /sys/devices/system/memory/memoryXXX/online
>
> - "online_movable", "online", "offline" command
> - which will be performed on all sections in the block.
> -``phys_device`` read-only: legacy interface only ever used on s390x to
> - expose the covered storage increment.
> -``removable`` read-only: legacy interface that indicated whether a memory
> - block was likely to be offlineable or not. Newer kernel
> - versions return "1" if and only if the kernel supports
> - memory offlining.
> -``valid_zones`` read-only: designed to show by which zone memory provided by
> - a memory block is managed, and to show by which zone memory
> - provided by an offline memory block could be managed when
> - onlining.
> -
> - The first column shows it`s default zone.
> -
> - "memory6/valid_zones: Normal Movable" shows this memoryblock
> - can be onlined to ZONE_NORMAL by default and to ZONE_MOVABLE
> - by online_movable.
> -
> - "memory7/valid_zones: Movable Normal" shows this memoryblock
> - can be onlined to ZONE_MOVABLE by default and to ZONE_NORMAL
> - by online_kernel.
> -=================== ============================================================
> +The kernel will select the target zone automatically, usually defaulting to
> +``ZONE_NORMAL`` unless ``movablecore=1`` has been specified on the kernel
> +command line or if the memory block would intersect the ZONE_MOVABLE already.
>
> -.. note::
> +One can explicitly request to associate an offline memory block with
> +ZONE_MOVABLE by::
>
> - These directories/files appear after physical memory hotplug phase.
> + % echo online_movable > /sys/devices/system/memory/memoryXXX/state
>
> -If CONFIG_NUMA is enabled the memoryXXX/ directories can also be accessed
> -via symbolic links located in the ``/sys/devices/system/node/node*`` directories.
> +Or one can explicitly request a kernel zone (usually ZONE_NORMAL) by::
>
> -For example::
> + % echo online_kernel > /sys/devices/system/memory/memoryXXX/state
>
> - /sys/devices/system/node/node0/memory9 -> ../../memory/memory9
> +In any case, if offline succeeds, the state of the memory block is changed to be
> +"online". If it fails, an error will be returned by the kernel via the system
> +call that triggered the respective file modification.
>
> -A backlink will also be created::
> +Onlining Memory Blocks Automatically
> +------------------------------------
>
> - /sys/devices/system/memory/memory9/node0 -> ../../node/node0
> +The kernel can be configured to try auto-onlining of newly added memory blocks.
> +If this feature is disabled, the memory blocks will stay offline until
> +explicitly onlined from user space.
>
> -.. _memory_hotplug_physical_mem:
> +The configured auto-online behavior can be observed via::
>
> -Physical memory hot-add phase
> -=============================
> + % cat /sys/devices/system/memory/auto_online_blocks
>
> -Hardware(Firmware) Support
> ---------------------------
> +Auto-onlining can be enabled by writing ``online``, ``online_kernel`` or
> +``online_movable`` to that file, like::
>
> -On x86_64/ia64 platform, memory hotplug by ACPI is supported.
> + % echo online > /sys/devices/system/memory/auto_online_blocks
>
> -In general, the firmware (ACPI) which supports memory hotplug defines
> -memory class object of _HID "PNP0C80". When a notify is asserted to PNP0C80,
> -Linux's ACPI handler does hot-add memory to the system and calls a hotplug udev
> -script. This will be done automatically.
> +Modifying the auto-online behavior will only affect all subsequently added
> +memory blocks only.
>
> -But scripts for memory hotplug are not contained in generic udev package(now).
> -You may have to write it by yourself or online/offline memory by hand.
> -Please see :ref:`memory_hotplug_how_to_online_memory` and
> -:ref:`memory_hotplug_how_to_offline_memory`.
> +.. note::
>
> -If firmware supports NUMA-node hotplug, and defines an object _HID "ACPI0004",
> -"PNP0A05", or "PNP0A06", notification is asserted to it, and ACPI handler
> -calls hotplug code for all of objects which are defined in it.
> -If memory device is found, memory hotplug code will be called.
> + In corner cases, auto-onlining can fail. The kernel won't retry. Note that
> + auto-onlining is not expected to fail in default configurations.
>
> -Notify memory hot-add event by hand
> ------------------------------------
> +.. note::
>
> -On some architectures, the firmware may not notify the kernel of a memory
> -hotplug event. Therefore, the memory "probe" interface is supported to
> -explicitly notify the kernel. This interface depends on
> -CONFIG_ARCH_MEMORY_PROBE and can be configured on powerpc, sh, and x86
> -if hotplug is supported, although for x86 this should be handled by ACPI
> -notification.
> + DLPAR on ppc64 ignores the ``offline`` setting and will still online added
> + memory blocks; if onlining fails, memory blocks are removed again.
>
> -Probe interface is located at::
> +Offlining Memory Blocks
> +-----------------------
>
> - /sys/devices/system/memory/probe
> +In the current implementation, Linux's memory offlining will try migrating all
> +movable pages off the affected memory block. As most kernel allocations, such as
> +page tables, are unmovable, page migration can fail and, therefore, inhibit
> +memory offlining from succeeding.
>
> -You can tell the physical address of new memory to the kernel by::
> +Having the memory provided by memory block managed by ZONE_MOVABLE significantly
> +increases memory offlining reliability; still, memory offlining can fail in
> +some corner cases.
>
> - % echo start_address_of_new_memory > /sys/devices/system/memory/probe
> +Further, memory offlining might retry for a long time (or even forever), until
> +aborted by the user.
>
> -Then, [start_address_of_new_memory, start_address_of_new_memory +
> -memory_block_size] memory range is hot-added. In this case, hotplug script is
> -not called (in current implementation). You'll have to online memory by
> -yourself. Please see :ref:`memory_hotplug_how_to_online_memory`.
> +Offlining of a memory block can be triggered via::
>
> -Logical Memory hot-add phase
> -============================
> + % echo offline > /sys/devices/system/memory/memoryXXX/state
>
> -State of memory
> ----------------
> +Or alternatively::
>
> -To see (online/offline) state of a memory block, read 'state' file::
> + % echo 0 > /sys/devices/system/memory/memoryXXX/online
> +
> +If offline succeeds, the state of the memory block is changed to be "offline".
> +If it fails, an error will be returned by the kernel.
> +
> +Observing the State of Memory Blocks
> +------------------------------------
> +
> +The state (online/offline/going-offline) of a memory block can be observed
> +either via::
>
> % cat /sys/device/system/memory/memoryXXX/state
>
> +Or alternatively (1/0) via::
>
> -- If the memory block is online, you'll read "online".
> -- If the memory block is offline, you'll read "offline".
> + % cat /sys/device/system/memory/memoryXXX/online
>
> +For an online memory block, the managing zone can be observed via::
>
> -.. _memory_hotplug_how_to_online_memory:
> + % cat /sys/device/system/memory/memoryXXX/valid_zones
>
> -How to online memory
> ---------------------
> +Configuring Memory Hot(Un)Plug
> +==============================
>
> -When the memory is hot-added, the kernel decides whether or not to "online"
> -it according to the policy which can be read from "auto_online_blocks" file::
> +There are various ways how system administrators can configure memory
> +hot(un)plug and interact with memory blocks, especially, to online them.
>
> - % cat /sys/devices/system/memory/auto_online_blocks
> +Memory Hot(Un)Plug Configuration via Sysfs
> +------------------------------------------
>
> -The default depends on the CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE kernel config
> -option. If it is disabled the default is "offline" which means the newly added
> -memory is not in a ready-to-use state and you have to "online" the newly added
> -memory blocks manually. Automatic onlining can be requested by writing "online"
> -to "auto_online_blocks" file::
> +Some memory hot(un)plug properties can be configured or inspected via sysfs in::
>
> - % echo online > /sys/devices/system/memory/auto_online_blocks
> + /sys/devices/system/memory/
>
> -This sets a global policy and impacts all memory blocks that will subsequently
> -be hotplugged. Currently offline blocks keep their state. It is possible, under
> -certain circumstances, that some memory blocks will be added but will fail to
> -online. User space tools can check their "state" files
> -(``/sys/devices/system/memory/memoryXXX/state``) and try to online them manually.
> +The following files are currently defined:
>
> -If the automatic onlining wasn't requested, failed, or some memory block was
> -offlined it is possible to change the individual block's state by writing to the
> -"state" file::
> +====================== =========================================================
> +``auto_online_blocks`` read-write: set or get the default state of new memory
> + blocks; configure auto-onlining.
>
> - % echo online > /sys/devices/system/memory/memoryXXX/state
> + The default value depends on the
> + CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE kernel configuration
> + option.
>
> -This onlining will not change the ZONE type of the target memory block,
> -If the memory block doesn't belong to any zone an appropriate kernel zone
> -(usually ZONE_NORMAL) will be used unless movable_node kernel command line
> -option is specified when ZONE_MOVABLE will be used.
> + See the ``state`` property of memory blocks for details.
> +``block_size_bytes`` read-only: the size in bytes of a memory block.
> +``probe`` write-only: add (probe) selected memory blocks manually
> + from user space by supplying the physical start address.
>
> -You can explicitly request to associate it with ZONE_MOVABLE by::
> + Availability depends on the CONFIG_ARCH_MEMORY_PROBE
> + kernel configuration option.
> +``uevent`` read-write: generic udev file for device subsystems.
> +====================== =========================================================
>
> - % echo online_movable > /sys/devices/system/memory/memoryXXX/state
> +.. note::
>
> -.. note:: current limit: this memory block must be adjacent to ZONE_MOVABLE
> + When the CONFIG_MEMORY_FAILURE kernel configuration option is enabled, two
> + additional files ``hard_offline_page`` and ``soft_offline_page`` are available
> + to trigger hwpoisoning of pages, for example, for testing purposes. Note that
> + this functionality is not really related to memory hot(un)plug or actual
> + offlining of memory blocks.
>
> -Or you can explicitly request a kernel zone (usually ZONE_NORMAL) by::
> +Memory Block Configuration via Sysfs
> +------------------------------------
>
> - % echo online_kernel > /sys/devices/system/memory/memoryXXX/state
> +Each memory block is represented as a memory block device that can be
> +onlined or offlined. All memory blocks have their device information located in
> +sysfs. Each present memory block is listed under
> +``/sys/devices/system/memory`` as::
> +
> + /sys/devices/system/memory/memoryXXX
> +
> +where XXX is the memory block id; the number of digits is variable.
>
> -.. note:: current limit: this memory block must be adjacent to ZONE_NORMAL
> +A present memory block indicates that some memory in the range is present;
> +however, a memory block might span memory holes. A memory block spanning memory
> +holes cannot be offlined.
>
> -An explicit zone onlining can fail (e.g. when the range is already within
> -and existing and incompatible zone already).
> +For example, assume 1 GiB memory block size. A device for a memory starting at
> +0x100000000 is ``/sys/device/system/memory/memory4``::
>
> -After this, memory block XXX's state will be 'online' and the amount of
> -available memory will be increased.
> + (0x100000000 / 1Gib = 4)
>
> -This may be changed in future.
> +This device covers address range [0x100000000 ... 0x140000000)
>
> -Logical memory remove
> -=====================
> +The following files are currently defined:
>
> -Memory offline and ZONE_MOVABLE
> --------------------------------
> +=================== ============================================================
> +``online`` read-write: simplified interface to trigger onlining /
> + offlining and to observe the state of a memory block.
> + When onlining, the zone is selected automatically.
> +``phys_device`` read-only: legacy interface only ever used on s390x to
> + expose the covered storage increment.
> +``phys_index`` read-only: the memory block id (XXX).
> +``removable`` read-only: legacy interface that indicated whether a memory
> + block was likely to be offlineable or not. Nowadays, the
> + kernel return ``1`` if and only if it supports memory
> + offlining.
> +``state`` read-write: advanced interface to trigger onlining /
> + offlining and to observe the state of a memory block.
> +
> + When writing, ``online``, ``offline``, ``online_kernel`` and
> + ``online_movable`` are supported.
> +
> + ``online_movable`` specifies onlining to ZONE_MOVABLE.
> + ``online_kernel`` specifies onlining to the default kernel
> + zone for the memory block, such as ZONE_NORMAL.
> + ``online`` let's the kernel select the zone automatically.
> +
> + When reading, ``online``, ``offline`` and ``going-offline``
> + may be returned.
> +``uevent`` read-write: generic uevent file for devices.
> +``valid_zones`` read-only: when a block is online, shows the zone it
> + belongs to; when a block is offline, shows what zone will
> + manage it when the block will be onlined.
> +
> + For online memory blocks, ``DMA``, ``DMA32``, ``Normal``,
> + ``Movable`` and ``none`` may be returned. ``none`` indicates
> + that memory provided by a memory block is managed by
> + multiple zones or spans multiple nodes; such memory blocks
> + cannot be offlined. ``Movable`` indicates ZONE_MOVABLE.
> + Other values indicate a kernel zone.
> +
> + For offline memory blocks, the first column shows the
> + zone the kernel would select when onlining the memory block
> + right now without further specifying a zone.
> +
> + Availability depends on the CONFIG_MEMORY_HOTREMOVE
> + kernel configuration option.
> +=================== ============================================================
>
> -Memory offlining is more complicated than memory online. Because memory offline
> -has to make the whole memory block be unused, memory offline can fail if
> -the memory block includes memory which cannot be freed.
> +.. note::
>
> -In general, memory offline can use 2 techniques.
> + If the CONFIG_NUMA kernel configuration option is enabled, the memoryXXX/
> + directories can also be accessed via symbolic links located in the
> + ``/sys/devices/system/node/node*`` directories.
>
> -(1) reclaim and free all memory in the memory block.
> -(2) migrate all pages in the memory block.
> + For example::
>
> -In the current implementation, Linux's memory offline uses method (2), freeing
> -all pages in the memory block by page migration. But not all pages are
> -migratable. Under current Linux, migratable pages are anonymous pages and
> -page caches. For offlining a memory block by migration, the kernel has to
> -guarantee that the memory block contains only migratable pages.
> + /sys/devices/system/node/node0/memory9 -> ../../memory/memory9
>
> -Now, a boot option for making a memory block which consists of migratable pages
> -is supported. By specifying "kernelcore=" or "movablecore=" boot option, you can
> -create ZONE_MOVABLE...a zone which is just used for movable pages.
> -(See also Documentation/admin-guide/kernel-parameters.rst)
> + A backlink will also be created::
>
> -Assume the system has "TOTAL" amount of memory at boot time, this boot option
> -creates ZONE_MOVABLE as following.
> + /sys/devices/system/memory/memory9/node0 -> ../../node/node0
>
> -1) When kernelcore=YYYY boot option is used,
> - Size of memory not for movable pages (not for offline) is YYYY.
> - Size of memory for movable pages (for offline) is TOTAL-YYYY.
> +Command Line Parameters
> +-----------------------
>
> -2) When movablecore=ZZZZ boot option is used,
> - Size of memory not for movable pages (not for offline) is TOTAL - ZZZZ.
> - Size of memory for movable pages (for offline) is ZZZZ.
> +Some command line parameters affect memory hot(un)plug handling. The following
> +command line parameters are relevant:
>
> -.. note::
> +======================== =======================================================
> +``memhp_default_state`` configure auto-onlining by essentially setting
> + ``/sys/devices/system/memory/auto_online_blocks``.
> +``movablecore`` configure automatic zone selection of the kernel. When
> + set, the kernel will default to ZONE_MOVABLE, unless
> + other zones can be kept contiguous.
> +======================== =======================================================
> +
> +Module Parameters
> +------------------
>
> - Unfortunately, there is no information to show which memory block belongs
> - to ZONE_MOVABLE. This is TBD.
> +Instead of additional command line parameters or sysfs files, the
> +``memory_hotplug`` subsystem now provides a dedicated namespace for module
> +parameters. Module parameters can be set via the command line by predicating
> +them with ``memory_hotplug.`` such as::
> +
> + memory_hotplug.memmap_on_memory=1
> +
> +and they can be observed (and some even modified at runtime) via::
> +
> + /sys/modules/memory_hotplug/parameters/
> +
> +The following module parameters are currently defined:
> +
> +======================== =======================================================
> +``memmap_on_memory`` read-write: Allocate memory for the memmap from the
> + added memory block itself. Even if enabled, actual
> + support depends on various other system properties and
> + should only be regarded as a hint whether the behavior
> + would be desired.
> +
> + While allocating the memmap from the memory block
> + itself makes memory hotplug less likely to fail and
> + keeps the memmap on the same NUMA node in any case, it
> + can fragment physical memory in a way that huge pages
> + in bigger granularity cannot be formed on hotplugged
> + memory.
> +======================== =======================================================
> +
> +ZONE_MOVABLE
> +============
> +
> +ZONE_MOVABLE is an important mechanism for more reliable memory offlining.
> +Further, having system RAM managed by ZONE_MOVABLE instead of one of the
> +kernel zones can increase the number of possible transparent huge pages and
> +dynamically allocated huge pages.
> +
> +Most kernel allocations are unmovable. Important examples include the memory
> +map (usually 1/64ths of memory), page tables, and kmalloc(). Such allocations
> +can only be served from the kernel zones.
> +
> +Most user space pages, such as anonymous memory, and page cache pages are
> +movable. Such allocations can be served from ZONE_MOVABLE and the kernel zones.
> +
> +Only movable allocations are served from ZONE_MOVABLE, resulting in unmovable
> +allocations being limited to the kernel zones. Without ZONE_MOVABLE, there is
> +absolutely no guarantee whether a memory block can be offlined successfully.
> +
> +Zone Imbalances
> +---------------
>
> - Memory offlining can fail when dissolving a free huge page on ZONE_MOVABLE
> - and the feature of freeing unused vmemmap pages associated with each hugetlb
> - page is enabled.
> +Having too much system RAM managed by ZONE_MOVABLE is called a zone imbalance,
> +which can harm the system or degrade performance. As one example, the kernel
> +might crash because it runs out of free memory for unmovable allocations,
> +although there is still plenty of free memory left in ZONE_MOVABLE.
>
> - This can happen when we have plenty of ZONE_MOVABLE memory, but not enough
> - kernel memory to allocate vmemmmap pages. We may even be able to migrate
> - huge page contents, but will not be able to dissolve the source huge page.
> - This will prevent an offline operation and is unfortunate as memory offlining
> - is expected to succeed on movable zones. Users that depend on memory hotplug
> - to succeed for movable zones should carefully consider whether the memory
> - savings gained from this feature are worth the risk of possibly not being
> - able to offline memory in certain situations.
> +Usually, MOVABLE:KERNEL ratios of up to 3:1 or even 4:1 are fine. Ratios of 63:1
> +are definitely impossible due to the overhead for the memory map.
> +
> +Actual safe zone ratios depend on the workload. Extreme cases, like excessive
> +long-term pinning of pages, might not be able to deal with ZONE_MOVABLE at all.
>
> .. note::
> - Techniques that rely on long-term pinnings of memory (especially, RDMA and
> - vfio) are fundamentally problematic with ZONE_MOVABLE and, therefore, memory
> - hot remove. Pinned pages cannot reside on ZONE_MOVABLE, to guarantee that
> - memory can still get hot removed - be aware that pinning can fail even if
> - there is plenty of free memory in ZONE_MOVABLE. In addition, using
> - ZONE_MOVABLE might make page pinning more expensive, because pages have to be
> - migrated off that zone first.
>
> -.. _memory_hotplug_how_to_offline_memory:
> + CMA memory part of a kernel zone essentially behaves like memory in
> + ZONE_MOVABLE and similar considerations apply, especially when combining
> + CMA with ZONE_MOVABLE.
>
> -How to offline memory
> ----------------------
> +ZONE_MOVABLE Sizing Considerations
> +----------------------------------
>
> -You can offline a memory block by using the same sysfs interface that was used
> -in memory onlining::
> +We usually expect that a large portion of available system RAM will actually
> +be consumed by user space, either directly or indirectly via the page cache. In
> +the normal case, ZONE_MOVABLE can be used when allocating such pages just fine.
>
> - % echo offline > /sys/devices/system/memory/memoryXXX/state
> +With that in mind, it makes sense that we can have a big portion of system RAM
> +managed by ZONE_MOVABLE. However, there are some things to consider when using
> +ZONE_MOVABLE, especially when fine-tuning zone ratios:
>
> -If offline succeeds, the state of the memory block is changed to be "offline".
> -If it fails, some error core (like -EBUSY) will be returned by the kernel.
> -Even if a memory block does not belong to ZONE_MOVABLE, you can try to offline
> -it. If it doesn't contain 'unmovable' memory, you'll get success.
> -
> -A memory block under ZONE_MOVABLE is considered to be able to be offlined
> -easily. But under some busy state, it may return -EBUSY. Even if a memory
> -block cannot be offlined due to -EBUSY, you can retry offlining it and may be
> -able to offline it (or not). (For example, a page is referred to by some kernel
> -internal call and released soon.)
> -
> -Consideration:
> - Memory hotplug's design direction is to make the possibility of memory
> - offlining higher and to guarantee unplugging memory under any situation. But
> - it needs more work. Returning -EBUSY under some situation may be good because
> - the user can decide to retry more or not by himself. Currently, memory
> - offlining code does some amount of retry with 120 seconds timeout.
> -
> -Physical memory remove
> -======================
> -
> -Need more implementation yet....
> - - Notification completion of remove works by OS to firmware.
> - - Guard from remove if not yet.
> -
> -
> -Future Work
> -===========
> -
> - - allowing memory hot-add to ZONE_MOVABLE. maybe we need some switch like
> - sysctl or new control file.
> - - showing memory block and physical device relationship.
> - - test and make it better memory offlining.
> - - support HugeTLB page migration and offlining.
> - - memmap removing at memory offline.
> - - physical remove memory.
> +- Having a lot of offline memory blocks. Even offline memory blocks consume
> + memory for metadata and page tables in the direct map; having a lot of offline
> + memory blocks is not a typical case, though.
> +
> +- Memory ballooning without balloon compaction is incompatible with
> + ZONE_MOVABLE. Only some implementations, such as virtio-balloon and
> + pseries CMM, fully support balloon compaction.
> +
> + Further, the CONFIG_BALLOON_COMPACTION kernel configuration option might be
> + disabled. In that case, balloon inflation will only perform unmovable
> + allocations and silently create a zone imbalance, usually triggered by
> + inflation requests from the hypervisor.
> +
> +- Gigantic pages are unmovable, resulting in user space consuming a
> + lot of unmovable memory.
> +
> +- Huge pages are unmovable when an architectures does not support huge
> + page migration, resulting in a similar issue as with gigantic pages.
> +
> +- Page tables are unmovable. Excessive swapping, mapping extremely large
> + files or ZONE_DEVICE memory can be problematic, although only really relevant
> + in corner cases. When we manage a lot of user space memory that has been
> + swapped out or is served from a file/persistent memory/... we still need a lot
> + of page tables to manage that memory once user space accessed that memory.
> +
> +- In certain DAX configurations the memory map for the device memory will be
> + allocated from the kernel zones.
> +
> +- KASAN can have a significant memory overhead, for example, consuming 1/8th of
> + the total system memory size as (unmovable) tracking metadata.
> +
> +- Long-term pinning of pages. Techniques that rely on long-term pinnings
> + (especially, RDMA and vfio/mdev) are fundamentally problematic with
> + ZONE_MOVABLE, and therefore, memory offlining. Pinned pages cannot reside
> + on ZONE_MOVABLE as that would turn these pages unmovable. Therefore, they
> + have to be migrated off that zone while pinning. Pinning a page can fail
> + even if there is plenty of free memory in ZONE_MOVABLE.
> +
> + In addition, using ZONE_MOVABLE might make page pinning more expensive,
> + because of the page migration overhead.
> +
> +By default, all the memory configured at boot time is managed by the kernel
> +zones and ZONE_MOVABLE is not used.
> +
> +To enable ZONE_MOVABLE to include the memory present at boot and to control the
> +ratio between movable and kernel zones there are two command line options:
> +``kernelcore=`` and ``movablecore=``. See
> +Documentation/admin-guide/kernel-parameters.rst for their description.
> +
> +Memory Offlining and ZONE_MOVABLE
> +---------------------------------
> +
> +Even with ZONE_MOVABLE, there are some corner cases where offlining a memory
> +block might fail:
> +
> +- Memory blocks with memory holes; this applies to memory blocks present during
> + boot and can apply to memory blocks hotplugged via the XEN balloon and the
> + Hyper-V balloon.
> +
> +- Mixed NUMA nodes and mixed zones within a single memory block prevent memory
> + offlining; this applies to memory blocks present during boot only.
> +
> +- Special memory blocks prevented by the system from getting offlined. Examples
> + include any memory available during boot on aarch64 or memory blocks spanning
> + the crashkernel area on s390x; this usually applies to memory blocks present
> + during boot only.
> +
> +- Memory blocks overlapping with CMA areas cannot be offlined, this applies to
> + memory blocks present during boot only.
> +
> +- Concurrent activity that operates on the same physical memory area, such as
> + allocating gigantic pages, can result in temporary offlining failures.
> +
> +- Out of memory when dissolving huge pages, especially when freeing unused
> + vmemmap pages associated with each hugetlb page is enabled.
> +
> + Offlining code may be able to migrate huge page contents, but may not be able
> + to dissolve the source huge page because it fails allocating (unmovable) pages
> + for the vmemmap, because the system might not have free memory in the kernel
> + zones left.
> +
> + Users that depend on memory hotplug to succeed for movable zones should
> + carefully consider whether the memory savings gained from this feature are
> + worth the risk of possibly not being able to offline memory in certain
> + situations.
> +
> +Further, when running into out of memory situations while migrating pages, or
> +when still encountering permanently unmovable pages within ZONE_MOVABLE
> +(-> BUG), memory offlining will keep retrying until it eventually succeeds.
> +
> +When offlining is triggered from user space, the offlining context can be
> +terminated by sending a fatal signal. A timeout based offlining can easily be
> +implemented via::
> +
> + % timeout $TIMEOUT offline_block | failure_handling
> --
> 2.31.1
>

--
Sincerely yours,
Mike.

\
 
 \ /
  Last update: 2021-06-09 09:08    [W:0.151 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site