lkml.org 
[lkml]   [2021]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: PATCH] mmc: block: ioctl: Poll for TRAN if possible
Date
> Poll for TRAN state if the ioctl command will eventually return to TRAN
>
> The ioctl submitted command should not be considered completed until
> the card has returned back to TRAN state. Waiting just for the card
> to no longer signal busy is not enough as they might remain in a
> non-busy PROG state for a while after the command.
> Further commands requiring TRAN will fail then.
> It should not be the responsibility of the user to check if their command
> has completed until sending the next via ioctl,
> instead the check should be made here.
> So now, in doubt, wait for TRAN except for the few commands that will
> never return to TRAN state.
Is this theoretical, or do you have an exact scenario in which the polling with cmd13 isn't enough?

Thanks,
Avri
\
 
 \ /
  Last update: 2021-06-08 13:22    [W:0.103 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site