lkml.org 
[lkml]   [2021]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] arm64: boot: dts: sdm45: Add support for LMh node
Date
Add LMh nodes for cpu cluster0 and cpu cluster1. Also add interrupt
support in cpufreq node to capture the LMh interrupt and let the scheduler
know of the max frequency throttling.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0a86fe71a66d..fdd8d816f728 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3646,6 +3646,24 @@ swm: swm@c85 {
};
};

+ lmh_cluster1: lmh@17d70800 {
+ compatible = "qcom,msm-hw-limits";
+ reg = <0 0x17d70800 0 0x401>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,lmh-cpu-id = <0x4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ lmh_cluster0: lmh@17d78800 {
+ compatible = "qcom,msm-hw-limits";
+ reg = <0 0x17d78800 0 0x401>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,lmh-cpu-id = <0x0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
sound: sound {
};

@@ -4911,10 +4929,13 @@ cpufreq_hw: cpufreq@17d43000 {
reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
reg-names = "freq-domain0", "freq-domain1";

+ interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>;
+
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
clock-names = "xo", "alternate";

#freq-domain-cells = <1>;
+ qcom,support-lmh = <1>;
};

wifi: wifi@18800000 {
--
2.25.1
\
 
 \ /
  Last update: 2021-06-09 00:32    [W:0.128 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site