Messages in this thread | | | Subject | Re: [PATCH net-next v6 0/3] Enable 2.5Gbps speed for stmmac | From | patchwork-bot+netdevbpf@kernel ... | Date | Tue, 08 Jun 2021 21:40:04 +0000 |
| |
Hello:
This series was applied to netdev/net-next.git (refs/heads/master):
On Tue, 8 Jun 2021 11:51:55 +0800 you wrote: > Intel mGbE supports 2.5Gbps link speed by overclocking the clock rate > by 2.5 times to support 2.5Gbps link speed. In this mode, the serdes/PHY > operates at a serial baud rate of 3.125 Gbps and the PCS data path and > GMII interface of the MAC operate at 312.5 MHz instead of 125 MHz. > This is configured in the BIOS during boot up. The kernel driver is not able > access to modify the clock rate for 1Gbps/2.5G mode on the fly. The way to > determine the current 1G/2.5G mode is by reading a dedicated adhoc > register through mdio bus. > > [...]
Here is the summary with links: - [net-next,v6,1/3] net: stmmac: split xPCS setup from mdio register https://git.kernel.org/netdev/net-next/c/597a68ce3216 - [net-next,v6,2/3] net: pcs: add 2500BASEX support for Intel mGbE controller https://git.kernel.org/netdev/net-next/c/f27abde3042a - [net-next,v6,3/3] net: stmmac: enable Intel mGbE 2.5Gbps link speed https://git.kernel.org/netdev/net-next/c/46682cb86a37
You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
| |