lkml.org 
[lkml]   [2021]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 0/7] usb: typec: ucsi: Polling the alt modes and PDOs
From
Date
On Tue, 2021-06-08 at 09:54 +0300, Heikki Krogerus wrote:
> On Tue, Jun 08, 2021 at 09:42:09AM +0300, Heikki Krogerus wrote:
> > Please check does the partner device get removed. What do you have
> > under /sys/class/typec after that happens?
>
> Oh yes. Could you also share the trace output when that happens?
>
>         cd /sys/kernel/debug/tracing
>         echo 1 > events/ucsi/enable
>         # now reproduce the issue
>         cat trace > ucsi.trace

So, the partner device is still there when this happens (see below). I
also only see a single event in the trace for the fast plug/unplug
case:
kworker/u16:8-1771 [003] .... 18848.872145: ucsi_connector_change: port1 status: change=4a04, opmode=5, connected=1, sourcing=0, partner_flags=1, partner_type=1, request_data_obj=1304b12c, BC status=1

The typec port/partner states is:

port1-partner/accessory_mode:none
port1-partner/supports_usb_power_delivery:no
port1-partner/uevent:DEVTYPE=typec_partner
port1-partner/usb_power_delivery_revision:0.0

and

port0/data_role:host [device]
port0/power_operation_mode:default
port0/power_role:source [sink]
port0/supported_accessory_modes:none
port0/uevent:DEVTYPE=typec_port
port0/uevent:TYPEC_PORT=port0
port0/usb_power_delivery_revision:2.0
port0/usb_typec_revision:1.0
port0/vconn_source:no
port1/data_role:host [device]
port1/power_operation_mode:3.0A
port1/power_role:source [sink]
port1/supported_accessory_modes:none
port1/uevent:DEVTYPE=typec_port
port1/uevent:TYPEC_PORT=port1
port1/usb_power_delivery_revision:2.0
port1/usb_typec_revision:1.0
port1/vconn_source:no

Note that for a normal plug I am usually getting a second event. This
second event is occasionally missing though:
kworker/u16:38-1800 [001] .... 19522.325885: ucsi_connector_change: port1 status: change=4a04, opmode=5, connected=1, sourcing=0, partner_flags=1, partner_type=1, request_data_obj=1304b12c, BC status=1
kworker/u16:38-1800 [004] .... 19522.552613: ucsi_connector_change: port1 status: change=0044, opmode=3, connected=1, sourcing=0, partner_flags=1, partner_type=1, request_data_obj=1304b12c, BC status=1

and a working unplug consistently looks like:
kworker/u16:8-1771 [003] .... 19670.020085: ucsi_connector_change: port1 status: change=4804, opmode=0, connected=0, sourcing=0, partner_flags=1, partner_type=1, request_data_obj=1304b12c, BC status=0

Benjamin
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-06-08 22:01    [W:0.073 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site