lkml.org 
[lkml]   [2021]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/23] usb: mtu3: power down port when power down device IP
Date
When power down device IP, we can also power down device port,
then power on the port again when power on device ip, it's helpful
to make device ip enter ip sleep mode.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/usb/mtu3/mtu3_core.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index e306b93c007d..562f4357831e 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -334,6 +334,10 @@ void mtu3_start(struct mtu3 *mtu)
mtu3_readl(mbase, U3D_DEVICE_CONTROL));

mtu3_clrbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
+ if (mtu->is_u3_ip)
+ mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0), SSUSB_U3_PORT_PDN);
+
+ mtu3_clrbits(mtu->ippc_base, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_PDN);

mtu3_csr_init(mtu);
mtu3_set_speed(mtu, mtu->speed);
@@ -356,6 +360,11 @@ void mtu3_stop(struct mtu3 *mtu)
mtu3_dev_on_off(mtu, 0);

mtu->is_active = 0;
+
+ if (mtu->is_u3_ip)
+ mtu3_setbits(mtu->ippc_base, SSUSB_U3_CTRL(0), SSUSB_U3_PORT_PDN);
+
+ mtu3_setbits(mtu->ippc_base, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_PDN);
mtu3_setbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
}

--
2.18.0
\
 
 \ /
  Last update: 2021-06-08 09:58    [W:0.109 / U:3.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site