lkml.org 
[lkml]   [2021]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/4] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
On Sat 05 Jun 09:40 CDT 2021, Prasad Malisetty wrote:

> Add PCIe nodes for sc7280 IDP board.
>

This looks good, but it can't come before patch 2 in the series, which
introduces these labels.

Regards,
Bjorn

> Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sc7280-idp.dts | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> index 3900cfc..a58552b 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> @@ -268,6 +268,34 @@
> };
> };
>
> +&pcie1 {
> + status = "okay";
> +
> + vdda-supply = <&vreg_l10c_0p8>;
> +};
> +
> +&pcie1_phy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l10c_0p8>;
> + vdda-pll-supply = <&vreg_l6b_1p2>;
> +};
> +
> +&pcie1_default_state {
> + clkreq {
> + bias-pull-up;
> + };
> +
> + wake-n {
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + nvme-n {
> + bias-pull-up;
> + };
> +};
> +
> &qupv3_id_0 {
> status = "okay";
> };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>

\
 
 \ /
  Last update: 2021-06-06 04:22    [W:0.096 / U:1.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site