lkml.org 
[lkml]   [2021]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support
On Thu, Jun 3, 2021 at 12:01 PM Sander Vanheule <sander@svanheule.net> wrote:

> This driver implements the GPIO and pin muxing features provided by the
> RTL8231. The device should be instantiated as an MFD child, where the
> parent device has already configured the regmap used for register
> access.
>
> Debouncing is only available for the six highest GPIOs, and must be
> emulated when other pins are used for (button) inputs. Although
> described in the bindings, drive strength selection is currently not
> implemented.
>
> Signed-off-by: Sander Vanheule <sander@svanheule.net>

Wow this looks really good. Thanks for going the extra mile
and fix this. Special thanks to Andy for the thorough review.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2021-06-05 00:12    [W:0.101 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site