lkml.org 
[lkml]   [2021]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 1/8] PCI: Add pcie_reset_flr to follow calling convention of other reset methods
On 21/06/30 11:56AM, Alex Williamson wrote:
> On Tue, 29 Jun 2021 21:30:57 +0530
> Amey Narkhede <ameynarkhede03@gmail.com> wrote:
>
> > Add has_flr bitfield in struct pci_dev to indicate support for pcie flr
> > to avoid reading PCI_EXP_DEVCAP multiple times and get rid of
> > PCI_DEV_FLAGS_NO_FLR_RESET in quirk_no_flr().
> >
> > Currently there is separate function pcie_has_flr() to probe if pcie flr is
> > supported by the device which does not match the calling convention
> > followed by reset methods which use second function argument to decide
> > whether to probe or not. Add new function pcie_reset_flr() that follows
> > the calling convention of reset methods.
> >
> > Co-developed-by: Alex Williamson <alex.williamson@redhat.com>
> > Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
>
> There are some non-trivial changes here vs previous, should probably
> drop this.
>
> > Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
> > ---
> > drivers/crypto/cavium/nitrox/nitrox_main.c | 4 +-
> > drivers/pci/pci.c | 62 +++++++++++-----------
> > drivers/pci/pcie/aer.c | 12 ++---
> > drivers/pci/probe.c | 6 ++-
> > drivers/pci/quirks.c | 11 ++--
> > include/linux/pci.h | 7 ++-
> > 6 files changed, 47 insertions(+), 55 deletions(-)
> >
> > diff --git a/drivers/crypto/cavium/nitrox/nitrox_main.c b/drivers/crypto/cavium/nitrox/nitrox_main.c
> > index facc8e6bc..15d6c8452 100644
> > --- a/drivers/crypto/cavium/nitrox/nitrox_main.c
> > +++ b/drivers/crypto/cavium/nitrox/nitrox_main.c
> > @@ -306,9 +306,7 @@ static int nitrox_device_flr(struct pci_dev *pdev)
> > return -ENOMEM;
> > }
> >
> > - /* check flr support */
> > - if (pcie_has_flr(pdev))
> > - pcie_flr(pdev);
> > + pcie_reset_flr(pdev, 0);
> >
> > pci_restore_state(pdev);
> >
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index 452351025..28f099a4f 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -4611,32 +4611,12 @@ int pci_wait_for_pending_transaction(struct pci_dev *dev)
> > }
> > EXPORT_SYMBOL(pci_wait_for_pending_transaction);
> >
> > -/**
> > - * pcie_has_flr - check if a device supports function level resets
> > - * @dev: device to check
> > - *
> > - * Returns true if the device advertises support for PCIe function level
> > - * resets.
> > - */
> > -bool pcie_has_flr(struct pci_dev *dev)
> > -{
> > - u32 cap;
> > -
> > - if (dev->dev_flags & PCI_DEV_FLAGS_NO_FLR_RESET)
> > - return false;
> > -
> > - pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
> > - return cap & PCI_EXP_DEVCAP_FLR;
> > -}
> > -EXPORT_SYMBOL_GPL(pcie_has_flr);
> > -
> > /**
> > * pcie_flr - initiate a PCIe function level reset
> > * @dev: device to reset
> > *
> > - * Initiate a function level reset on @dev. The caller should ensure the
> > - * device supports FLR before calling this function, e.g. by using the
> > - * pcie_has_flr() helper.
> > + * Initiate a function level reset unconditionally on @dev without
> > + * checking any flags and DEVCAP
> > */
> > int pcie_flr(struct pci_dev *dev)
> > {
> > @@ -4659,16 +4639,35 @@ int pcie_flr(struct pci_dev *dev)
> > }
> > EXPORT_SYMBOL_GPL(pcie_flr);
> >
> > +/**
> > + * pcie_reset_flr - initiate a PCIe function level reset
> > + * @dev: device to reset
> > + * @probe: If set, only check if the device can be reset this way.
> > + *
> > + * Initiate a function level reset on @dev.
> > + */
> > +int pcie_reset_flr(struct pci_dev *dev, int probe)
> > +{
> > + if (!dev->has_flr)
> > + return -ENOTTY;
> > +
> > + if (probe)
> > + return 0;
> > +
> > + return pcie_flr(dev);
> > +}
> > +EXPORT_SYMBOL_GPL(pcie_reset_flr);
> > +
> > static int pci_af_flr(struct pci_dev *dev, int probe)
> > {
> > int pos;
> > u8 cap;
> >
> > - pos = pci_find_capability(dev, PCI_CAP_ID_AF);
> > - if (!pos)
> > + if (!dev->has_flr)
> > return -ENOTTY;
> >
> > - if (dev->dev_flags & PCI_DEV_FLAGS_NO_FLR_RESET)
> > + pos = pci_find_capability(dev, PCI_CAP_ID_AF);
> > + if (!pos)
> > return -ENOTTY;
> >
> > pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap);
>
>
> How can has_flr encompass both methods of invoking FLR? PCIe FLR is
> not a prerequisite to AF FLR.
>
I see. Does this mean that there should be a separate flag for disabling
AF FLR?
>
> > @@ -5139,11 +5138,9 @@ int __pci_reset_function_locked(struct pci_dev *dev)
> > rc = pci_dev_specific_reset(dev, 0);
> > if (rc != -ENOTTY)
> > return rc;
> > - if (pcie_has_flr(dev)) {
> > - rc = pcie_flr(dev);
> > - if (rc != -ENOTTY)
> > - return rc;
> > - }
> > + rc = pcie_reset_flr(dev, 0);
> > + if (rc != -ENOTTY)
> > + return rc;
> > rc = pci_af_flr(dev, 0);
> > if (rc != -ENOTTY)
> > return rc;
> > @@ -5174,8 +5171,9 @@ int pci_probe_reset_function(struct pci_dev *dev)
> > rc = pci_dev_specific_reset(dev, 1);
> > if (rc != -ENOTTY)
> > return rc;
> > - if (pcie_has_flr(dev))
> > - return 0;
> > + rc = pcie_reset_flr(dev, 1);
> > + if (rc != -ENOTTY)
> > + return rc;
> > rc = pci_af_flr(dev, 1);
> > if (rc != -ENOTTY)
> > return rc;
> > diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> > index ec943cee5..98077595a 100644
> > --- a/drivers/pci/pcie/aer.c
> > +++ b/drivers/pci/pcie/aer.c
> > @@ -1405,13 +1405,11 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
> > }
> >
> > if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
> > - if (pcie_has_flr(dev)) {
> > - rc = pcie_flr(dev);
> > - pci_info(dev, "has been reset (%d)\n", rc);
> > - } else {
> > - pci_info(dev, "not reset (no FLR support)\n");
> > - rc = -ENOTTY;
> > - }
> > + rc = pcie_reset_flr(dev, 0);
> > + if (!rc)
> > + pci_info(dev, "has been reset\n");
> > + else
> > + pci_info(dev, "not reset (no FLR support: %d)\n", rc);
> > } else {
> > rc = pci_bus_error_reset(dev);
> > pci_info(dev, "%s Port link has been reset (%d)\n",
> > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> > index 3a62d09b8..862d91615 100644
> > --- a/drivers/pci/probe.c
> > +++ b/drivers/pci/probe.c
> > @@ -1487,6 +1487,7 @@ void set_pcie_port_type(struct pci_dev *pdev)
> > {
> > int pos;
> > u16 reg16;
> > + u32 reg32;
> > int type;
> > struct pci_dev *parent;
> >
> > @@ -1497,8 +1498,9 @@ void set_pcie_port_type(struct pci_dev *pdev)
> > pdev->pcie_cap = pos;
> > pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
> > pdev->pcie_flags_reg = reg16;
> > - pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, &reg16);
> > - pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
> > + pci_read_config_dword(pdev, pos + PCI_EXP_DEVCAP, &reg32);
> > + pdev->pcie_mpss = reg32 & PCI_EXP_DEVCAP_PAYLOAD;
> > + pdev->has_flr = reg32 & PCI_EXP_DEVCAP_FLR ? 1 : 0;
>
> We only set has_flr for PCIe FLR, so I think this effectively kills AF
> FLR. The ternary should be unnecessary here.
>
I believe only one of the PCIe FLR and PCI AF FLR will be available at a time.
So I think it should be okay to check for PCI_AF_CAP_FLR and set
pdev->has_flr accordingly. One question though, what is PCI_AF_CAP_TP
and how is it related to PCI AF FLR?
> >
> > parent = pci_upstream_bridge(pdev);
> > if (!parent)
> > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > index d85914afe..1efdc4e5a 100644
> > --- a/drivers/pci/quirks.c
> > +++ b/drivers/pci/quirks.c
> > @@ -3819,7 +3819,7 @@ static int nvme_disable_and_flr(struct pci_dev *dev, int probe)
> > u32 cfg;
> >
> > if (dev->class != PCI_CLASS_STORAGE_EXPRESS ||
> > - !pcie_has_flr(dev) || !pci_resource_start(dev, 0))
> > + pcie_reset_flr(dev, 1) || !pci_resource_start(dev, 0))
> > return -ENOTTY;
> >
> > if (probe)
> > @@ -3888,13 +3888,10 @@ static int nvme_disable_and_flr(struct pci_dev *dev, int probe)
> > */
> > static int delay_250ms_after_flr(struct pci_dev *dev, int probe)
> > {
> > - if (!pcie_has_flr(dev))
> > - return -ENOTTY;
> > + int ret = pcie_reset_flr(dev, probe);
> >
> > if (probe)
> > - return 0;
> > -
> > - pcie_flr(dev);
> > + return ret;
> >
> > msleep(250);
> >
> > @@ -5182,7 +5179,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap);
> > */
> > static void quirk_no_flr(struct pci_dev *dev)
> > {
> > - dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET;
> > + dev->has_flr = 0;
> > }
> > DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x1487, quirk_no_flr);
> > DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x148c, quirk_no_flr);
> > diff --git a/include/linux/pci.h b/include/linux/pci.h
> > index c20211e59..74f42a2cd 100644
> > --- a/include/linux/pci.h
> > +++ b/include/linux/pci.h
> > @@ -223,10 +223,8 @@ enum pci_dev_flags {
> > PCI_DEV_FLAGS_VPD_REF_F0 = (__force pci_dev_flags_t) (1 << 8),
> > /* A non-root bridge where translation occurs, stop alias search here */
> > PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT = (__force pci_dev_flags_t) (1 << 9),
> > - /* Do not use FLR even if device advertises PCI_AF_CAP */
> > - PCI_DEV_FLAGS_NO_FLR_RESET = (__force pci_dev_flags_t) (1 << 10),
> > /* Don't use Relaxed Ordering for TLPs directed at this device */
> > - PCI_DEV_FLAGS_NO_RELAXED_ORDERING = (__force pci_dev_flags_t) (1 << 11),
> > + PCI_DEV_FLAGS_NO_RELAXED_ORDERING = (__force pci_dev_flags_t) (1 << 10),
> > };
> >
> > enum pci_irq_reroute_variant {
> > @@ -381,6 +379,7 @@ struct pci_dev {
> > bit manually */
> > unsigned int d3hot_delay; /* D3hot->D0 transition time in ms */
> > unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
> > + unsigned int has_flr:1;
>
> There are more space efficient places to define this. Thanks,
>
> Alex
>
Oops. Will update this in v9.

Thanks,
Amey
> >
> > #ifdef CONFIG_PCIEASPM
> > struct pcie_link_state *link_state; /* ASPM link state */
> > @@ -1225,7 +1224,7 @@ u32 pcie_bandwidth_available(struct pci_dev *dev, struct pci_dev **limiting_dev,
> > enum pci_bus_speed *speed,
> > enum pcie_link_width *width);
> > void pcie_print_link_status(struct pci_dev *dev);
> > -bool pcie_has_flr(struct pci_dev *dev);
> > +int pcie_reset_flr(struct pci_dev *dev, int probe);
> > int pcie_flr(struct pci_dev *dev);
> > int __pci_reset_function_locked(struct pci_dev *dev);
> > int pci_reset_function(struct pci_dev *dev);
>

\
 
 \ /
  Last update: 2021-06-30 22:05    [W:0.718 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site