lkml.org 
[lkml]   [2021]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] rtl8xxxu: Fix the handling of TX A-MPDU aggregation
Date
From: Chris Chiu <chris.chiu@canonical.com>

The TX A-MPDU aggregation is not handled in the driver since the
ieee80211_start_tx_ba_session has never been started properly.
Start and stop the TX BA session by tracking the TX aggregation
status of each TID. Fix the ampdu_action and the tx descriptor
accordingly with the given TID.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
---
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 ++
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 33 ++++++++++++++-----
2 files changed, 26 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index d1a566cc0c9e..3f7ff84f2056 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1383,6 +1383,8 @@ struct rtl8xxxu_priv {
u8 no_pape:1;
u8 int_buf[USB_INTR_CONTENT_LENGTH];
u8 rssi_level;
+ bool tx_aggr_started[IEEE80211_NUM_TIDS];
+ DECLARE_BITMAP(tid_bitmap, IEEE80211_NUM_TIDS);
/*
* Only one virtual interface permitted because only STA mode
* is supported and no iface_combinations are provided.
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 9ff09cf7eb62..03c6ed7efe06 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4805,6 +4805,8 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u32 rate;
u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
@@ -4828,7 +4830,7 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,

tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);

- if (ampdu_enable)
+ if (ampdu_enable && test_bit(tid, priv->tid_bitmap))
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
else
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
@@ -4876,6 +4878,8 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
struct rtl8xxxu_txdesc40 *tx_desc40;
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u32 rate;
u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
@@ -4902,7 +4906,7 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,

tx_desc40->txdw9 = cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);

- if (ampdu_enable)
+ if (ampdu_enable && test_bit(tid, priv->tid_bitmap))
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
else
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
@@ -5015,12 +5019,19 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
if (ieee80211_is_data_qos(hdr->frame_control) && sta) {
if (sta->ht_cap.ht_supported) {
u32 ampdu, val32;
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;

ampdu = (u32)sta->ht_cap.ampdu_density;
val32 = ampdu << TXDESC_AMPDU_DENSITY_SHIFT;
tx_desc->txdw2 |= cpu_to_le32(val32);

ampdu_enable = true;
+
+ if (!priv->tx_aggr_started[tid] &&
+ !(skb->protocol == cpu_to_be16(ETH_P_PAE)))
+ if (!ieee80211_start_tx_ba_session(sta, tid, 0))
+ priv->tx_aggr_started[tid] = true;
}
}

@@ -6089,6 +6100,7 @@ rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct device *dev = &priv->udev->dev;
u8 ampdu_factor, ampdu_density;
struct ieee80211_sta *sta = params->sta;
+ u16 tid = params->tid;
enum ieee80211_ampdu_mlme_action action = params->action;

switch (action) {
@@ -6101,17 +6113,20 @@ rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
dev_dbg(dev,
"Changed HT: ampdu_factor %02x, ampdu_density %02x\n",
ampdu_factor, ampdu_density);
- break;
+ return IEEE80211_AMPDU_TX_START_IMMEDIATE;
+ case IEEE80211_AMPDU_TX_STOP_CONT:
case IEEE80211_AMPDU_TX_STOP_FLUSH:
- dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__);
- rtl8xxxu_set_ampdu_factor(priv, 0);
- rtl8xxxu_set_ampdu_min_space(priv, 0);
- break;
case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
- dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n",
- __func__);
+ dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP\n", __func__);
rtl8xxxu_set_ampdu_factor(priv, 0);
rtl8xxxu_set_ampdu_min_space(priv, 0);
+ priv->tx_aggr_started[tid] = false;
+ clear_bit(tid, priv->tid_bitmap);
+ ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ break;
+ case IEEE80211_AMPDU_TX_OPERATIONAL:
+ dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_OPERATIONAL\n", __func__);
+ set_bit(tid, priv->tid_bitmap);
break;
case IEEE80211_AMPDU_RX_START:
dev_dbg(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__);
--
2.20.1
\
 
 \ /
  Last update: 2021-06-30 18:04    [W:0.092 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site