lkml.org 
[lkml]   [2021]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 2/2] MIPS: Loongson64: DTS: Add pm block node for Loongson-2K1000
From
Date


On 06/30/2021 04:20 PM, Jiaxun Yang wrote:
>
> 在 2021/6/30 14:51, Qing Zhang 写道:
>> The module is now supported, enable it.
>
> Oh, you forgot binding document.

oh, I forgot a patch... :
I'll send it make RESEND.

Thanks,

-Qing

>
> Thanks.
>
> - Jiaxun
>
>>
>> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
>> ---
>> arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>> b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>> index 569e814def83..8f469b623740 100644
>> --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>> +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>> @@ -52,6 +52,11 @@ package0: bus@10000000 {
>> 0 0x40000000 0 0x40000000 0 0x40000000
>> 0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>;
>> + pm: power-controller@1fe07000 {
>> + compatible = "loongson,ls2k-pm";
>> + reg = <0 0x1fe07000 0 0x422>;
>> + };
>> +
>> liointc0: interrupt-controller@1fe11400 {
>> compatible = "loongson,liointc-2.0";
>> reg = <0 0x1fe11400 0 0x40>,

\
 
 \ /
  Last update: 2021-06-30 14:35    [W:0.040 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site