lkml.org 
[lkml]   [2021]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/5] MIPS: CI20: Reduce clocksource to 750 kHz.
Hi Zhou,

Le sam., juin 26 2021 at 14:18:40 +0800, 周琰杰 (Zhou Yanjie)
<zhouyanjie@wanyeetech.com> a écrit :
> The original clock (3 MHz) is too fast for the clocksource,
> there will be a chance that the system may get stuck.
>
> Reported-by: Nikolaus Schaller <hns@goldelico.com>
> Tested-by: Nikolaus Schaller <hns@goldelico.com> # on CI20
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>

Acked-by: Paul Cercueil <paul@crapouillou.net>

Cheers,
-Paul

> ---
>
> Notes:
> v4:
> New patch.
>
> arch/mips/boot/dts/ingenic/ci20.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts
> b/arch/mips/boot/dts/ingenic/ci20.dts
> index 8877c62..3a4eaf1 100644
> --- a/arch/mips/boot/dts/ingenic/ci20.dts
> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
> @@ -525,10 +525,10 @@
>
> &tcu {
> /*
> - * 750 kHz for the system timer and 3 MHz for the clocksource,
> + * 750 kHz for the system timer and clocksource,
> * use channel #0 for the system timer, #1 for the clocksource.
> */
> assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
> <&tcu TCU_CLK_OST>;
> - assigned-clock-rates = <750000>, <3000000>, <3000000>;
> + assigned-clock-rates = <750000>, <750000>, <3000000>;
> };
> --
> 2.7.4
>


\
 
 \ /
  Last update: 2021-06-30 14:22    [W:0.496 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site