[lkml]   [2021]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH AUTOSEL 4.9 11/17] scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
From: Dmitry Bogdanov <>

[ Upstream commit 2ef7665dfd88830f15415ba007c7c9a46be7acd8 ]

Target de-configuration panics at high CPU load because TPGT and WWPN can
be removed on separate threads.

TPGT removal requests a reset HBA on a separate thread and waits for reset
complete (phase1). Due to high CPU load that HBA reset can be delayed for
some time.

WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has
already completed and thus tgt.tgt_ops is subsequently cleared. However,
tgt.tgt_ops is needed to process incoming traffic and therefore this will
cause one of the following panics:

NIP qlt_reset+0x7c/0x220 [qla2xxx]
LR qlt_reset+0x68/0x220 [qla2xxx]
Call Trace:
0xc000003ffff63a78 (unreliable)
qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx]
qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx]
qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]


NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx]
LR qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx]
Call Trace:
qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable)
qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]


NIP qlt_create_sess+0x90/0x4e0 [qla2xxx]
LR qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
Call Trace:
0xc0000000348fba30 (unreliable)
qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
qla2x00_do_work+0x674/0xbf0 [qla2xxx]

The patch fixes the issue by serializing qlt_stop_phase1() and
qlt_stop_phase2() functions to make WWPN removal wait for phase1

Reviewed-by: Roman Bolshakov <>
Signed-off-by: Dmitry Bogdanov <>
Signed-off-by: Martin K. Petersen <>
Signed-off-by: Sasha Levin <>
drivers/scsi/qla2xxx/qla_target.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index b889caa556a0..6ef7a094ee51 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1224,6 +1224,7 @@ void qlt_stop_phase2(struct qla_tgt *tgt)
"Waiting for %d IRQ commands to complete (tgt %p)",
tgt->irq_cmd_count, tgt);

+ mutex_lock(&tgt->ha->optrom_mutex);
spin_lock_irqsave(&ha->hardware_lock, flags);
while ((tgt->irq_cmd_count != 0) || (tgt->atio_irq_cmd_count != 0)) {
@@ -1235,6 +1236,7 @@ void qlt_stop_phase2(struct qla_tgt *tgt)
tgt->tgt_stopped = 1;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ mutex_unlock(&tgt->ha->optrom_mutex);

ql_dbg(ql_dbg_tgt_mgt, vha, 0xf00c, "Stop of tgt %p finished",
 \ /
  Last update: 2021-06-03 19:17    [W:0.092 / U:1.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site