lkml.org 
[lkml]   [2021]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 1/2] dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltageg
On Fri, May 28, 2021 at 02:29:42PM +0800, Richard Zhu wrote:
> The i.MX8MQ PCIe PHY can use either a 1.8V or a 3.3V power supply.
> Add a "vph-supply" property to indicate which regulator supplies
> power for the PHY.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 3 +++
> 1 file changed, 3 insertions(+)

For DT bindings you must CC devicetree@vger.kernel.org, please resend.

Thanks,
Lorenzo

> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index de4b2baf91e8..d8971ab99274 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -38,6 +38,9 @@ Optional properties:
> The regulator will be enabled when initializing the PCIe host and
> disabled either as part of the init process or when shutting down the
> host.
> +- vph-supply: Should specify the regulator in charge of VPH one of the three
> + PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage
> + supplies.
>
> Additional required properties for imx6sx-pcie:
> - clock names: Must include the following additional entries:
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2021-06-03 18:20    [W:0.092 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site