lkml.org 
[lkml]   [2021]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] rtl8xxxu: Fix ampdu_action to get block ack session work
Date
From: Chris Chiu <chris.chiu@canonical.com>

The TID is not handled in the ampdu actions. Fix the ampdu_action
to handle the ampdu operations according to the TID. The ampdu
stop also needs to be handled by ieee80211_stop_tx_ba_cb_irqsafe
for the mac80211 to respond accordingly.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
---
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 27 ++++++++++++-------
2 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index d1a566cc0c9e..ebd69c161899 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1383,6 +1383,7 @@ struct rtl8xxxu_priv {
u8 no_pape:1;
u8 int_buf[USB_INTR_CONTENT_LENGTH];
u8 rssi_level;
+ u8 tid_bitmap;
/*
* Only one virtual interface permitted because only STA mode
* is supported and no iface_combinations are provided.
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 4cf13d2f86b1..790be4ecc3d0 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4805,6 +4805,8 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u32 rate;
u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
@@ -4828,7 +4830,8 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,

tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);

- if (ampdu_enable)
+ if (ampdu_enable && (priv->tid_bitmap & BIT(tid)) &&
+ (tx_info->flags & IEEE80211_TX_CTL_AMPDU))
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
else
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
@@ -4876,6 +4879,8 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
struct rtl8xxxu_txdesc40 *tx_desc40;
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u32 rate;
u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
@@ -4902,7 +4907,8 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,

tx_desc40->txdw9 = cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);

- if (ampdu_enable)
+ if (ampdu_enable && (priv->tid_bitmap & BIT(tid)) &&
+ (tx_info->flags & IEEE80211_TX_CTL_AMPDU))
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
else
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
@@ -6089,6 +6095,7 @@ rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct device *dev = &priv->udev->dev;
u8 ampdu_factor, ampdu_density;
struct ieee80211_sta *sta = params->sta;
+ u16 tid = params->tid;
enum ieee80211_ampdu_mlme_action action = params->action;

switch (action) {
@@ -6101,17 +6108,19 @@ rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
dev_dbg(dev,
"Changed HT: ampdu_factor %02x, ampdu_density %02x\n",
ampdu_factor, ampdu_density);
- break;
+ return IEEE80211_AMPDU_TX_START_IMMEDIATE;
+ case IEEE80211_AMPDU_TX_STOP_CONT:
case IEEE80211_AMPDU_TX_STOP_FLUSH:
- dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__);
- rtl8xxxu_set_ampdu_factor(priv, 0);
- rtl8xxxu_set_ampdu_min_space(priv, 0);
- break;
case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
- dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n",
- __func__);
+ dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP\n", __func__);
rtl8xxxu_set_ampdu_factor(priv, 0);
rtl8xxxu_set_ampdu_min_space(priv, 0);
+ priv->tid_bitmap &= ~BIT(tid);
+ ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ break;
+ case IEEE80211_AMPDU_TX_OPERATIONAL:
+ dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_OPERATIONAL\n", __func__);
+ priv->tid_bitmap |= BIT(tid);
break;
case IEEE80211_AMPDU_RX_START:
dev_dbg(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__);
--
2.20.1
\
 
 \ /
  Last update: 2021-06-03 14:07    [W:0.126 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site