lkml.org 
[lkml]   [2021]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/3] pwm: mtk-disp: Switch to atomic API
Date
Convert the legacy api to atomic API.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
drivers/pwm/pwm-mtk-disp.c | 78 ++++++++++++++++++++++++++++----------
1 file changed, 59 insertions(+), 19 deletions(-)

diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index b87b3c00a685..d77348d0527c 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -67,8 +67,8 @@ static void mtk_disp_pwm_update_bits(struct mtk_disp_pwm *mdp, u32 offset,
writel(value, address);
}

-static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
+static int mtk_disp_pwm_config(struct pwm_chip *chip,
+ const struct pwm_state *state)
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
u32 clk_div, period, high_width, value;
@@ -102,7 +102,7 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
* high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
*/
rate = clk_get_rate(mdp->clk_main);
- clk_div = div_u64(rate * period_ns, NSEC_PER_SEC) >>
+ clk_div = div_u64(rate * state->period, NSEC_PER_SEC) >>
PWM_PERIOD_BIT_WIDTH;
if (clk_div > PWM_CLKDIV_MAX) {
dev_err(chip->dev, "clock rate is too high: rate = %d Hz\n",
@@ -114,11 +114,11 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return -EINVAL;
}
div = NSEC_PER_SEC * (clk_div + 1);
- period = div64_u64(rate * period_ns, div);
+ period = div64_u64(rate * state->period, div);
if (period > 0)
period--;

- high_width = div64_u64(rate * duty_ns, div);
+ high_width = div64_u64(rate * state->duty_cycle, div);
value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);

mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
@@ -144,39 +144,79 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
mdp->data->con0_sel);
}

+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+ mdp->data->enable_mask);
+ mdp->enabled = true;
+
return 0;
}

-static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
- int err;

- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
- mdp->data->enable_mask);
- mdp->enabled = true;
+ if (!state->enabled) {
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+ 0x0);

- return 0;
+ if (mdp->enabled) {
+ clk_disable_unprepare(mdp->clk_mm);
+ clk_disable_unprepare(mdp->clk_main);
+ }
+ mdp->enabled = false;
+ return 0;
+ }
+
+ return mtk_disp_pwm_config(chip, state);
}

-static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+static void mtk_disp_pwm_get_state(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ struct pwm_state *state)
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+ u32 clk_div, period, high_width, con0, con1;
+ u64 rate;
+ int err;

- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
- 0x0);
+ if (!mdp->enabled) {
+ err = clk_prepare_enable(mdp->clk_main);
+ if (err < 0) {
+ dev_err(chip->dev, "Can't enable mdp->clk_main: %d\n", err);
+ return;
+ }
+ err = clk_prepare_enable(mdp->clk_mm);
+ if (err < 0) {
+ dev_err(chip->dev, "Can't enable mdp->clk_mm: %d\n", err);
+ clk_disable_unprepare(mdp->clk_main);
+ return;
+ }
+ }
+
+ rate = clk_get_rate(mdp->clk_main);

- if (mdp->enabled) {
+ con0 = readl(mdp->base + mdp->data->con0);
+ con1 = readl(mdp->base + mdp->data->con1);
+
+ state->enabled = !!(con0 & BIT(0));
+
+ clk_div = (con0 & PWM_CLKDIV_MASK) >> PWM_CLKDIV_SHIFT;
+ period = con1 & PWM_PERIOD_MASK;
+ state->period = div_u64(period * (clk_div + 1) * NSEC_PER_SEC, rate);
+ high_width = (con1 & PWM_HIGH_WIDTH_MASK) >> PWM_HIGH_WIDTH_SHIFT;
+ state->duty_cycle = div_u64(high_width * (clk_div + 1) * NSEC_PER_SEC,
+ rate);
+
+ if (!mdp->enabled) {
clk_disable_unprepare(mdp->clk_mm);
clk_disable_unprepare(mdp->clk_main);
}
- mdp->enabled = false;
}

static const struct pwm_ops mtk_disp_pwm_ops = {
- .config = mtk_disp_pwm_config,
- .enable = mtk_disp_pwm_enable,
- .disable = mtk_disp_pwm_disable,
+ .apply = mtk_disp_pwm_apply,
+ .get_state = mtk_disp_pwm_get_state,
.owner = THIS_MODULE,
};

--
2.25.1
\
 
 \ /
  Last update: 2021-06-03 12:06    [W:0.088 / U:1.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site