lkml.org 
[lkml]   [2021]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5] drm/msm/dp: power off DP phy at suspend
Can you Cc dri-devel?

Quoting Kuogee Hsieh (2021-06-03 08:40:46)
> Normal DP suspend operation contains two steps, display off followed
> by dp suspend, to complete system wide suspending cycle if display is
> up at that time. In this case, DP phy will be powered off at display
> off. However there is an exception case that depending on the timing
> of dongle plug in during system wide suspending, sometimes display off
> procedure may be skipped and dp suspend was called directly. In this
> case, dp phy is stay at powered on (phy->power_count = 1) so that at
> next resume dp driver crash at main link clock enable due to phy is
> not physically powered on. This patch will call dp_ctrl_off_link_stream()
> to tear down main link and power off phy at dp_pm_suspend() if main link
> had been brought up.
>

\
 
 \ /
  Last update: 2021-06-03 22:23    [W:0.044 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site