lkml.org 
[lkml]   [2021]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mm: vmalloc: add cond_resched() in __vunmap()
On Fri 25-06-21 18:00:11, Uladzislau Rezki wrote:
> On Fri, Jun 25, 2021 at 10:51:08AM +0200, Michal Hocko wrote:
> > On Thu 24-06-21 16:23:39, Uladzislau Rezki wrote:
> > > On Thu, Jun 24, 2021 at 02:21:21PM +0200, Michal Hocko wrote:
> > > > On Tue 22-06-21 18:50:30, Rafael Aquini wrote:
> > > > > On non-preemptible kernel builds the watchdog can complain
> > > > > about soft lockups when vfree() is called against large
> > > > > vmalloc areas:
> > > > >
> > > > > [ 210.851798] kvmalloc-test: vmalloc(2199023255552) succeeded
> > > > > [ 238.654842] watchdog: BUG: soft lockup - CPU#181 stuck for 26s! [rmmod:5203]
> > > > > [ 238.662716] Modules linked in: kvmalloc_test(OE-) ...
> > > > > [ 238.772671] CPU: 181 PID: 5203 Comm: rmmod Tainted: G S OE 5.13.0-rc7+ #1
> > > > > [ 238.781413] Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYXCRB1.86B.0553.D01.1809190614 09/19/2018
> > > > > [ 238.792383] RIP: 0010:free_unref_page+0x52/0x60
> > > > > [ 238.797447] Code: 48 c1 fd 06 48 89 ee e8 9c d0 ff ff 84 c0 74 19 9c 41 5c fa 48 89 ee 48 89 df e8 b9 ea ff ff 41 f7 c4 00 02 00 00 74 01 fb 5b <5d> 41 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f0 29 77
> > > > > [ 238.818406] RSP: 0018:ffffb4d87868fe98 EFLAGS: 00000206
> > > > > [ 238.824236] RAX: 0000000000000000 RBX: 000000001da0c945 RCX: ffffb4d87868fe40
> > > > > [ 238.832200] RDX: ffffd79d3beed108 RSI: ffffd7998501dc08 RDI: ffff9c6fbffd7010
> > > > > [ 238.840166] RBP: 000000000d518cbd R08: ffffd7998501dc08 R09: 0000000000000001
> > > > > [ 238.848131] R10: 0000000000000000 R11: ffffd79d3beee088 R12: 0000000000000202
> > > > > [ 238.856095] R13: ffff9e5be3eceec0 R14: 0000000000000000 R15: 0000000000000000
> > > > > [ 238.864059] FS: 00007fe082c2d740(0000) GS:ffff9f4c69b40000(0000) knlGS:0000000000000000
> > > > > [ 238.873089] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > > > [ 238.879503] CR2: 000055a000611128 CR3: 000000f6094f6006 CR4: 00000000007706e0
> > > > > [ 238.887467] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > > > [ 238.895433] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> > > > > [ 238.903397] PKRU: 55555554
> > > > > [ 238.906417] Call Trace:
> > > > > [ 238.909149] __vunmap+0x17c/0x220
> > > > > [ 238.912851] __x64_sys_delete_module+0x13a/0x250
> > > > > [ 238.918008] ? syscall_trace_enter.isra.20+0x13c/0x1b0
> > > > > [ 238.923746] do_syscall_64+0x39/0x80
> > > > > [ 238.927740] entry_SYSCALL_64_after_hwframe+0x44/0xae
> > > > >
> > > > > Like in other range zapping routines that iterate over
> > > > > a large list, lets just add cond_resched() within __vunmap()'s
> > > > > page-releasing loop in order to avoid the watchdog splats.
> > > >
> > > > cond_resched makes a lot of sense. We do not want vmalloc to be visible
> > > > the userspace (e.g. by stalling it) so all time consuming operations
> > > > should yield regularly whenever possible. I would expect that any
> > > > susbsystem which needs huge vmalloc areas would have it for the whole
> > > > boot life time so such large vfrees should be really rare.
> > > >
> > > There is at least one more place with potentially similar issue. I see that
> > > the bulk allocator disables irqs during obtaining pages and filling an array.
> > >
> > > So i suspect if we request a huge size to allocate over vmalloc same soft
> > > lockup should occur. For example 10G alloactions simultaneously on different
> > > CPUs.
> >
> > I haven't payed a close attention to the changes regarding the bulk
> > allocator but my high level understanding is that it only allocates from
> > from pcp lists so the amount of allocatable pages is quite limited.
>
> I am able to trigger it. To simulate it i run 10 threads to allocate and vfree
> ~1GB(262144 pages) of vmalloced memory at the same time:
>
> <snip>
> [ 62.512621] RIP: 0010:__alloc_pages_bulk+0xa9f/0xbb0
> [ 62.512628] Code: ff 8b 44 24 48 44 29 f8 83 f8 01 0f 84 ea fe ff ff e9 07 f6 ff ff 48 8b 44 24 60 48 89 28 e9 00 f9 ff ff fb 66 0f 1f 44 00 00 <e9> e8 fd ff ff 65 48 01 51 10 e9 3e fe ff ff 48 8b 44 24 78 4d 89
> [ 62.512629] RSP: 0018:ffffa7bfc29ffd20 EFLAGS: 00000206
> [ 62.512631] RAX: 0000000000000200 RBX: ffffcd5405421888 RCX: ffff8c36ffdeb928
> [ 62.512632] RDX: 0000000000040000 RSI: ffffa896f06b2ff8 RDI: ffffcd5405421880
> [ 62.512633] RBP: ffffcd5405421880 R08: 000000000000007d R09: ffffffffffffffff
> [ 62.512634] R10: ffffffff9d63c084 R11: 00000000ffffffff R12: ffff8c373ffaeb80
> [ 62.512635] R13: ffff8c36ffdf65f8 R14: ffff8c373ffaeb80 R15: 0000000000040000
> [ 62.512637] FS: 0000000000000000(0000) GS:ffff8c36ffdc0000(0000) knlGS:0000000000000000
> [ 62.512638] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 62.512639] CR2: 000055c8e2fe8610 CR3: 0000000c13e10000 CR4: 00000000000006e0
> [ 62.512641] Call Trace:
> [ 62.512646] __vmalloc_node_range+0x11c/0x2d0
> [ 62.512649] ? full_fit_alloc_test+0x140/0x140 [test_vmalloc]
> [ 62.512654] __vmalloc_node+0x4b/0x70
> [ 62.512656] ? fix_size_alloc_test+0x44/0x60 [test_vmalloc]
> [ 62.512659] fix_size_alloc_test+0x44/0x60 [test_vmalloc]
> [ 62.512662] test_func+0xe7/0x1f0 [test_vmalloc]
> [ 62.512666] ? fix_align_alloc_test+0x50/0x50 [test_vmalloc]
> [ 62.512668] kthread+0x11a/0x140
> [ 62.512671] ? set_kthread_struct+0x40/0x40
> [ 62.512672] ret_from_fork+0x22/0x30
> <snip>
>
> As for how much a bulk allocator can allocate, it is quite a lot. In my case i see
> that 262144 pages can be obtained per one bulk call, if pcp-list is empty it is
> refilled.

Hmm, that is surprising. I would have to take a closer look but I
thought the pcp list won't get refilled while there is a consumer on
that cpu. So it should really be just about the number of pages on pcp
lists. 1GB worth of memory there sounds way too much.

> >From the other hand allocating 1GB on 10 CPUs simultaneously is not common test
> case in real world.
>
> Not sure if we can do something with it and if it is worth to fix. At least we can
> invoke a bulk allocator several times doing it per specific batch, for example 50
> pages.
>
> Any thoughts about it?

On the other hand the bulk allocator is meant to be optimized for speed
and it assumes a certain level of reasonability from its callers so it
makes some sense to do reasonable sized batches at the vmalloc end.
--
Michal Hocko
SUSE Labs

\
 
 \ /
  Last update: 2021-06-28 14:46    [W:0.330 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site