lkml.org 
[lkml]   [2021]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V7 4/4] soc: imx: Add blk-ctl driver for i.MX8MM
From
Date
On 6/14/21 8:07 PM, Adam Ford wrote:
> On Sat, Jun 12, 2021 at 7:58 AM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote:
>>
>> From: Peng Fan <peng.fan@nxp.com>
>>
>> The i.MX8MM SoC has dispmix BLK-CTL and vpumix BLK-CTL, so we add
>> that support in this driver.
>>
>> Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
>> Signed-off-by: Peng Fan <peng.fan@nxp.com>
>
> Maybe my TF-A is too old, but I am not able to wake the device from
> suspend-to-ram with this series. I used the device tree from [1] to
> enable both the GPCv2 and the blk-ctl stuff.
>
> [1] - https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210604111005.6804-1-peng.fan@oss.nxp.com/
>
> I based both off Shawn's for-next branch.

I also ran into issues with this, although it could also be related to
GPCv2. On MX8MM , the system sometimes hangs when bringing up the GPCv2
power domain 6 (VPUMIX). It seems that the GPCv2 driver sets
GPC_PU_PGC_SW_PUP_REQ register to 0x100 to bring up the VPUMIX and the
bit never self-clears. After that, it seems the entire GPC locks up.
Have you ever seen that kind of behavior ?

\
 
 \ /
  Last update: 2021-06-28 13:00    [W:0.149 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site