lkml.org 
[lkml]   [2021]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.12 3/5] gpio: mxc: Fix disabled interrupt wake-up support
Date
From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit 3093e6cca3ba7d47848068cb256c489675125181 ]

A disabled/masked interrupt marked as wakeup source must be re-enable
and unmasked in order to be able to wake-up the host. That can be done
by flaging the irqchip with IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND.

Note: It 'sometimes' works without that change, but only thanks to the
lazy generic interrupt disabling (keeping interrupt unmasked).

Reported-by: Michal Koziel <michal.koziel@emlogic.no>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-mxc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 157106e1e438..b9fdf05d7669 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -334,7 +334,7 @@ static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
ct->chip.irq_unmask = irq_gc_mask_set_bit;
ct->chip.irq_set_type = gpio_set_irq_type;
ct->chip.irq_set_wake = gpio_set_wake_irq;
- ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND;
+ ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND;
ct->regs.ack = GPIO_ISR;
ct->regs.mask = GPIO_IMR;

--
2.30.2
\
 
 \ /
  Last update: 2021-06-28 23:25    [W:0.293 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site