lkml.org 
[lkml]   [2021]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] dt-bindings: soc: qcom: aoss: Convert to YAML
On Mon 28 Jun 09:49 CDT 2021, Manivannan Sadhasivam wrote:

> On Fri, Jun 25, 2021 at 04:40:17PM -0700, Bjorn Andersson wrote:
> > Convert to YAML in order to allow validation.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> >
> > I'm aware that this conflicts with Sibi's removal of '#power-domain-cells', but
> > that's a trivial change regardless of which of the two patches gets in first.
> >
> > .../bindings/soc/qcom/qcom,aoss-qmp.txt | 90 --------------
> > .../bindings/soc/qcom/qcom,aoss-qmp.yaml | 115 ++++++++++++++++++
> > 2 files changed, 115 insertions(+), 90 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
> > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
> >
>
> [...]
>
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - mboxes
> > + - "#clock-cells"
>
> The old binding lists this property as optional but you're marking it
> as required. And by looking at the driver it seems to be optional only.
>

You're right, missed that detail. Will respin accordingly.

> > + - "#power-domain-cells"
>
> This one was marked optional as well but the driver registers the pd's
> unconditionally, so I guess it is fine.
>

I think this should be a required property, but the conversion should
convert the binding, so I'll update accordingly.

Also, Sibi has a series that drops the power-domains, due to some
unforeseen complications related to suspend, so there's no need to
follow up with a change to the binding in this regard.

Thanks,
Bjorn

> Thanks,
> Mani
>
> > +
> > +additionalProperties: false
> > +
> > +patternProperties:
> > + "^(cx|mx|ebi)$":
> > + type: object
> > + description:
> > + The AOSS side channel also provides the controls for three cooling devices,
> > + these are expressed as subnodes of the QMP node. The name of the node is
> > + used to identify the resource and must therefor be "cx", "mx" or "ebi".
> > +
> > + properties:
> > + "#cooling-cells":
> > + const: 2
> > +
> > + required:
> > + - "#cooling-cells"
> > +
> > + additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + aoss_qmp: qmp@c300000 {
> > + compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
> > + reg = <0x0c300000 0x100000>;
> > + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
> > + mboxes = <&apss_shared 0>;
> > +
> > + #clock-cells = <0>;
> > + #power-domain-cells = <1>;
> > +
> > + cx_cdev: cx {
> > + #cooling-cells = <2>;
> > + };
> > +
> > + mx_cdev: mx {
> > + #cooling-cells = <2>;
> > + };
> > + };
> > +...
> > --
> > 2.29.2
> >

\
 
 \ /
  Last update: 2021-06-28 18:11    [W:0.299 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site