lkml.org 
[lkml]   [2021]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH v5 1/2] arm64: Introduce stack trace reliability checks in the unwinder
From
Date
I will send out the next version without frame->reliable as implementing
a per-frame reliability thing obviously needs other changes and needs
Mark Rutland's code reorg.

Thanks!

Madhavan

On 6/25/21 10:39 AM, Madhavan T. Venkataraman wrote:
>
>
> On 6/24/21 9:40 AM, Mark Rutland wrote:
>> Hi Madhavan,
>>
>> On Wed, May 26, 2021 at 04:49:16PM -0500, madvenka@linux.microsoft.com wrote:
>>> From: "Madhavan T. Venkataraman" <madvenka@linux.microsoft.com>
>>>
>>> The unwinder should check for the presence of various features and
>>> conditions that can render the stack trace unreliable and mark the
>>> the stack trace as unreliable for the benefit of the caller.
>>>
>>> Introduce the first reliability check - If a return PC is not a valid
>>> kernel text address, consider the stack trace unreliable. It could be
>>> some generated code.
>>>
>>> Other reliability checks will be added in the future.
>>>
>>> Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
>>
>> At a high-level, I'm on-board with keeping track of this per unwind
>> step, but if we do that then I want to be abel to use this during
>> regular unwinds (e.g. so that we can have a backtrace idicate when a
>> step is not reliable, like x86 does with '?'), and to do that we need to
>> be a little more accurate.
>>
>
> The only consumer of frame->reliable is livepatch. So, in retrospect, my
> original per-frame reliability flag was an overkill. I was just trying to
> provide extra per-frame debug information which is not really a requirement
> for livepatch.
>
> So, let us separate the two. I will rename frame->reliable to frame->livepatch_safe.
> This will apply to the whole stacktrace and not to every frame.
>
> Pass a livepatch_safe flag to start_backtrace(). This will be the initial value
> of frame->livepatch_safe. So, if the caller knows that the starting frame is
> unreliable, he can pass "false" to start_backtrace().
>
> Whenever a reliability check fails, frame->livepatch_safe = false. After that
> point, it will remain false till the end of the stacktrace. This keeps it simple.
>
> Also, once livepatch_safe is set to false, further reliability checks will not
> be performed (what would be the point?).
>
> Finally, it might be a good idea to perform reliability checks even in
> start_backtrace() so we don't assume that the starting frame is reliable even
> if the caller passes livepatch_safe=true. What do you think?
>
>> I think we first need to do some more preparatory work for that, but
>> regardless, I have some comments below.
>>
>
> I agree that some more work is required to provide per-frame debug information
> and tracking. That can be done later. It is not a requirement for livepatch.
>
>>> ---
>>> arch/arm64/include/asm/stacktrace.h | 9 +++++++
>>> arch/arm64/kernel/stacktrace.c | 38 +++++++++++++++++++++++++----
>>> 2 files changed, 42 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h
>>> index eb29b1fe8255..4c822ef7f588 100644
>>> --- a/arch/arm64/include/asm/stacktrace.h
>>> +++ b/arch/arm64/include/asm/stacktrace.h
>>> @@ -49,6 +49,13 @@ struct stack_info {
>>> *
>>> * @graph: When FUNCTION_GRAPH_TRACER is selected, holds the index of a
>>> * replacement lr value in the ftrace graph stack.
>>> + *
>>> + * @reliable: Is this stack frame reliable? There are several checks that
>>> + * need to be performed in unwind_frame() before a stack frame
>>> + * is truly reliable. Until all the checks are present, this flag
>>> + * is just a place holder. Once all the checks are implemented,
>>> + * this comment will be updated and the flag can be used by the
>>> + * caller of unwind_frame().
>>
>> I'd prefer that we state the high-level semantic first, then drill down
>> into detail, e.g.
>>
>> | @reliable: Indicates whether this frame is beleived to be a reliable
>> | unwinding from the parent stackframe. This may be set
>> | regardless of whether the parent stackframe was reliable.
>> |
>> | This is set only if all the following are true:
>> |
>> | * @pc is a valid text address.
>> |
>> | Note: this is currently incomplete.
>>
>
> I will change the name of the flag. I will change the comment accordingly.
>
>>> */
>>> struct stackframe {
>>> unsigned long fp;
>>> @@ -59,6 +66,7 @@ struct stackframe {
>>> #ifdef CONFIG_FUNCTION_GRAPH_TRACER
>>> int graph;
>>> #endif
>>> + bool reliable;
>>> };
>>>
>>> extern int unwind_frame(struct task_struct *tsk, struct stackframe *frame);
>>> @@ -169,6 +177,7 @@ static inline void start_backtrace(struct stackframe *frame,
>>> bitmap_zero(frame->stacks_done, __NR_STACK_TYPES);
>>> frame->prev_fp = 0;
>>> frame->prev_type = STACK_TYPE_UNKNOWN;
>>> + frame->reliable = true;
>>> }
>>
>> I think we need more data than this to be accurate.
>>
>> Consider arch_stack_walk() starting from a pt_regs -- the initial state
>> (the PC from the regs) is accurate, but the first unwind from that will
>> not be, and we don't account for that at all.
>>
>> I think we need to capture an unwind type in struct stackframe, which we
>> can pass into start_backtrace(), e.g.
>>
>
>> | enum unwind_type {
>> | /*
>> | * The next frame is indicated by the frame pointer.
>> | * The next unwind may or may not be reliable.
>> | */
>> | UNWIND_TYPE_FP,
>> |
>> | /*
>> | * The next frame is indicated by the LR in pt_regs.
>> | * The next unwind is not reliable.
>> | */
>> | UNWIND_TYPE_REGS_LR,
>> |
>> | /*
>> | * We do not know how to unwind to the next frame.
>> | * The next unwind is not reliable.
>> | */
>> | UNWIND_TYPE_UNKNOWN
>> | };
>>
>> That should be simple enough to set up around start_backtrace(), but
>> we'll need further rework to make that simple at exception boundaries.
>> With the entry rework I have queued for v5.14, we're *almost* down to a
>> single asm<->c transition point for all vectors, and I'm hoping to
>> factor the remainder out to C for v5.15, whereupon we can annotate that
>> BL with some metadata for unwinding (with something similar to x86's
>> UNWIND_HINT, but retained for runtime).
>>
>
> I understood UNWIND_TYPE_FP and UNWIND_TYPE_REGS_LR. When would UNWIND_TYPE_UNKNOWN
> be passed to start_backtrace? Could you elaborate?
>
> Regardless, the above comment applies only to per-frame tracking when it is eventually
> implemented. For livepatch, it is not needed. At exception boundaries, if stack metadata
> is available, then use that to unwind safely. Else, livepatch_safe = false. The latter
> is what is being done in my patch series. So, we can go with that until stack metadata
> becomes available.
>
> For the UNWIND_TYPE_REGS_LR and UNWIND_TYPE_UNKNOWN cases, the caller will
> pass livepatch_safe=false to start_backtrace(). For UNWIND_TYPE_FP, the caller will
> pass livepatch_safe=true. So, only UNWIND_TYPE_FP matters for livepatch.
>
>>>
>>> #endif /* __ASM_STACKTRACE_H */
>>> diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
>>> index d55bdfb7789c..9061375c8785 100644
>>> --- a/arch/arm64/kernel/stacktrace.c
>>> +++ b/arch/arm64/kernel/stacktrace.c
>>> @@ -44,21 +44,29 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
>>> unsigned long fp = frame->fp;
>>> struct stack_info info;
>>>
>>> + frame->reliable = true;
>>
>> I'd prefer to do this the other way around, e.g. here do:
>>
>> | /*
>> | * Assume that an unwind step is unreliable until it has passed
>> | * all relevant checks.
>> | */
>> | frame->reliable = false;
>>
>> ... then only set this to true once we're certain the step is reliable.
>>
>> That requires fewer changes below, and would also be more robust as if
>> we forget to update this we'd accidentally mark an entry as unreliable
>> rather than accidentally marking it as reliable.
>>
>
> For livepatch_safe, the initial statement setting it to true at the
> beginning of unwind_frame() goes away. But whenever a reliability check fails,
> livepatch_safe has to be set to false.
>
>>> +
>>> /* Terminal record; nothing to unwind */
>>> if (!fp)
>>> return -ENOENT;
>>>
>>> - if (fp & 0xf)
>>> + if (fp & 0xf) {
>>> + frame->reliable = false;
>>> return -EINVAL;
>>> + }
>>>
>>> if (!tsk)
>>> tsk = current;
>>>
>>> - if (!on_accessible_stack(tsk, fp, &info))
>>> + if (!on_accessible_stack(tsk, fp, &info)) {
>>> + frame->reliable = false;
>>> return -EINVAL;
>>> + }
>>>
>>> - if (test_bit(info.type, frame->stacks_done))
>>> + if (test_bit(info.type, frame->stacks_done)) {
>>> + frame->reliable = false;
>>> return -EINVAL;
>>> + }
>>>
>>> /*
>>> * As stacks grow downward, any valid record on the same stack must be
>>> @@ -74,8 +82,10 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
>>> * stack.
>>> */
>>> if (info.type == frame->prev_type) {
>>> - if (fp <= frame->prev_fp)
>>> + if (fp <= frame->prev_fp) {
>>> + frame->reliable = false;
>>> return -EINVAL;
>>> + }
>>> } else {
>>> set_bit(frame->prev_type, frame->stacks_done);
>>> }
>>> @@ -100,14 +110,32 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
>>> * So replace it to an original value.
>>> */
>>> ret_stack = ftrace_graph_get_ret_stack(tsk, frame->graph++);
>>> - if (WARN_ON_ONCE(!ret_stack))
>>> + if (WARN_ON_ONCE(!ret_stack)) {
>>> + frame->reliable = false;
>>> return -EINVAL;
>>> + }
>>> frame->pc = ret_stack->ret;
>>> }
>>> #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
>>>
>>> frame->pc = ptrauth_strip_insn_pac(frame->pc);
>>>
>>> + /*
>>> + * Check the return PC for conditions that make unwinding unreliable.
>>> + * In each case, mark the stack trace as such.
>>> + */
>>> +
>>> + /*
>>> + * Make sure that the return address is a proper kernel text address.
>>> + * A NULL or invalid return address could mean:
>>> + *
>>> + * - generated code such as eBPF and optprobe trampolines
>>> + * - Foreign code (e.g. EFI runtime services)
>>> + * - Procedure Linkage Table (PLT) entries and veneer functions
>>> + */
>>> + if (!__kernel_text_address(frame->pc))
>>> + frame->reliable = false;
>>
>> I don't think we should mention PLTs here. They appear in regular kernel
>> text, and on arm64 they are generally not problematic for unwinding. The
>> case in which they are problematic are where they interpose an
>> trampoline call that isn't following the AAPCS (e.g. ftrace calls from a
>> module, or calls to __hwasan_tag_mismatch generally), and we'll have to
>> catch those explciitly (or forbid RELIABLE_STACKTRACE with HWASAN).
>>
>
> I will remove the mention of PLTs.
>
>> >From a backtrace perspective, the PC itself *is* reliable, but the next
>> unwind from this frame will not be, so I'd like to mark this as
>> reliable and the next unwind as unreliable. We can do that with the
>> UNWIND_TYPE_UNKNOWN suggestion above.
>>
>
> In the livepatch_safe approach, it can be set to false as soon as the unwinder
> realizes that there is unreliability, even if the unreliability is in the next
> frame. Actually, this would avoid one extra unwind step for livepatch.
>
>> For the comment here, how about:
>>
>> | /*
>> | * If the PC is not a known kernel text address, then we cannot
>> | * be sure that a subsequent unwind will be reliable, as we
>> | * don't know that the code follows our unwind requirements.
>> | */
>> | if (!__kernel_text_address(frame-pc))
>> | frame->unwind = UNWIND_TYPE_UNKNOWN;
>>
>
> OK. I can change the comment.
>
> Thanks!
>
> Madhavan
>

\
 
 \ /
  Last update: 2021-06-26 17:36    [W:2.456 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site