lkml.org 
[lkml]   [2021]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] dt-bindings: power: convert rockchip-io-domain.txt to YAML
Date
Current dts files with 'io-domains' nodes are manually verified.
In order to automate this process rockchip-io-domain.txt has to be
converted to YAML.

Changed:
Add supply properties for:
rockchip,rk3328-io-voltage-domain
rockchip,rv1108-io-voltage-domain
rockchip,rv1108-pmu-io-voltage-domain

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

Changed V2:
move grf part in separate patch
modify pin description

---

note for rob+dt:
unevaluatedProperties and
allOf:
-if:
doesn't seem to work.
Changed to
allOf:
- $ref:
---
.../bindings/power/rockchip-io-domain.txt | 135 ---------
.../bindings/power/rockchip-io-domain.yaml | 330 +++++++++++++++++++++
2 files changed, 330 insertions(+), 135 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/rockchip-io-domain.txt
create mode 100644 Documentation/devicetree/bindings/power/rockchip-io-domain.yaml

diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
deleted file mode 100644
index e66fd4eab..000000000
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-Rockchip SRAM for IO Voltage Domains:
--------------------------------------
-
-IO domain voltages on some Rockchip SoCs are variable but need to be
-kept in sync between the regulators and the SoC using a special
-register.
-
-A specific example using rk3288:
-- If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
- bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to
- that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
-
-Said another way, this driver simply handles keeping bits in the SoC's
-general register file (GRF) in sync with the actual value of a voltage
-hooked up to the pins.
-
-Note that this driver specifically doesn't include:
-- any logic for deciding what voltage we should set regulators to
-- any logic for deciding whether regulators (or internal SoC blocks)
- should have power or not have power
-
-If there were some other software that had the smarts of making
-decisions about regulators, it would work in conjunction with this
-driver. When that other software adjusted a regulator's voltage then
-this driver would handle telling the SoC about it. A good example is
-vqmmc for SD. In that case the dw_mmc driver simply is told about a
-regulator. It changes the regulator between 3.3V and 1.8V at the
-right time. This driver notices the change and makes sure that the
-SoC is on the same page.
-
-
-Required properties:
-- compatible: should be one of:
- - "rockchip,px30-io-voltage-domain" for px30
- - "rockchip,px30-pmu-io-voltage-domain" for px30 pmu-domains
- - "rockchip,rk3188-io-voltage-domain" for rk3188
- - "rockchip,rk3228-io-voltage-domain" for rk3228
- - "rockchip,rk3288-io-voltage-domain" for rk3288
- - "rockchip,rk3328-io-voltage-domain" for rk3328
- - "rockchip,rk3368-io-voltage-domain" for rk3368
- - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains
- - "rockchip,rk3399-io-voltage-domain" for rk3399
- - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains
- - "rockchip,rv1108-io-voltage-domain" for rv1108
- - "rockchip,rv1108-pmu-io-voltage-domain" for rv1108 pmu-domains
-
-Deprecated properties:
-- rockchip,grf: phandle to the syscon managing the "general register files"
- Systems should move the io-domains to a sub-node of the grf simple-mfd.
-
-You specify supplies using the standard regulator bindings by including
-a phandle the relevant regulator. All specified supplies must be able
-to report their voltage. The IO Voltage Domain for any non-specified
-supplies will be not be touched.
-
-Possible supplies for PX30:
-- vccio6-supply: The supply connected to VCCIO6.
-- vccio1-supply: The supply connected to VCCIO1.
-- vccio2-supply: The supply connected to VCCIO2.
-- vccio3-supply: The supply connected to VCCIO3.
-- vccio4-supply: The supply connected to VCCIO4.
-- vccio5-supply: The supply connected to VCCIO5.
-- vccio-oscgpi-supply: The supply connected to VCCIO_OSCGPI.
-
-Possible supplies for PX30 pmu-domains:
-- pmuio1-supply: The supply connected to PMUIO1.
-- pmuio2-supply: The supply connected to PMUIO2.
-
-Possible supplies for rk3188:
-- ap0-supply: The supply connected to AP0_VCC.
-- ap1-supply: The supply connected to AP1_VCC.
-- cif-supply: The supply connected to CIF_VCC.
-- flash-supply: The supply connected to FLASH_VCC.
-- lcdc0-supply: The supply connected to LCD0_VCC.
-- lcdc1-supply: The supply connected to LCD1_VCC.
-- vccio0-supply: The supply connected to VCCIO0.
-- vccio1-supply: The supply connected to VCCIO1.
- Sometimes also labeled VCCIO1 and VCCIO2.
-
-Possible supplies for rk3228:
-- vccio1-supply: The supply connected to VCCIO1.
-- vccio2-supply: The supply connected to VCCIO2.
-- vccio3-supply: The supply connected to VCCIO3.
-- vccio4-supply: The supply connected to VCCIO4.
-
-Possible supplies for rk3288:
-- audio-supply: The supply connected to APIO4_VDD.
-- bb-supply: The supply connected to APIO5_VDD.
-- dvp-supply: The supply connected to DVPIO_VDD.
-- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC
-- flash1-supply: The supply connected to FLASH1_VDD. Also known as SDIO1.
-- gpio30-supply: The supply connected to APIO1_VDD.
-- gpio1830 The supply connected to APIO2_VDD.
-- lcdc-supply: The supply connected to LCDC_VDD.
-- sdcard-supply: The supply connected to SDMMC0_VDD.
-- wifi-supply: The supply connected to APIO3_VDD. Also known as SDIO0.
-
-Possible supplies for rk3368:
-- audio-supply: The supply connected to APIO3_VDD.
-- dvp-supply: The supply connected to DVPIO_VDD.
-- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC
-- gpio30-supply: The supply connected to APIO1_VDD.
-- gpio1830 The supply connected to APIO4_VDD.
-- sdcard-supply: The supply connected to SDMMC0_VDD.
-- wifi-supply: The supply connected to APIO2_VDD. Also known as SDIO0.
-
-Possible supplies for rk3368 pmu-domains:
-- pmu-supply: The supply connected to PMUIO_VDD.
-- vop-supply: The supply connected to LCDC_VDD.
-
-Possible supplies for rk3399:
-- bt656-supply: The supply connected to APIO2_VDD.
-- audio-supply: The supply connected to APIO5_VDD.
-- sdmmc-supply: The supply connected to SDMMC0_VDD.
-- gpio1830 The supply connected to APIO4_VDD.
-
-Possible supplies for rk3399 pmu-domains:
-- pmu1830-supply:The supply connected to PMUIO2_VDD.
-
-Example:
-
- io-domains {
- compatible = "rockchip,rk3288-io-voltage-domain";
- rockchip,grf = <&grf>;
-
- audio-supply = <&vcc18_codec>;
- bb-supply = <&vcc33_io>;
- dvp-supply = <&vcc_18>;
- flash0-supply = <&vcc18_flashio>;
- gpio1830-supply = <&vcc33_io>;
- gpio30-supply = <&vcc33_pmuio>;
- lcdc-supply = <&vcc33_lcd>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vcc18_wl>;
- };
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
new file mode 100644
index 000000000..121bec56b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
@@ -0,0 +1,330 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip-io-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SRAM for IO Voltage Domains
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ IO domain voltages on some Rockchip SoCs are variable but need to be
+ kept in sync between the regulators and the SoC using a special
+ register.
+
+ A specific example using rk3288
+ If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
+ bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to
+ that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
+
+ Said another way, this driver simply handles keeping bits in the SoCs
+ General Register File (GRF) in sync with the actual value of a voltage
+ hooked up to the pins.
+
+ Note that this driver specifically does not include
+ any logic for deciding what voltage we should set regulators to
+ any logic for deciding whether regulators (or internal SoC blocks)
+ should have power or not have power
+
+ If there were some other software that had the smarts of making
+ decisions about regulators, it would work in conjunction with this
+ driver. When that other software adjusted a regulators voltage then
+ this driver would handle telling the SoC about it. A good example is
+ vqmmc for SD. In that case the dw_mmc driver simply is told about a
+ regulator. It changes the regulator between 3.3V and 1.8V at the
+ right time. This driver notices the change and makes sure that the
+ SoC is on the same page.
+
+ You specify supplies using the standard regulator bindings by including
+ a phandle the relevant regulator. All specified supplies must be able
+ to report their voltage. The IO Voltage Domain for any non-specified
+ supplies will be not be touched.
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30-io-voltage-domain
+ - rockchip,px30-pmu-io-voltage-domain
+ - rockchip,rk3188-io-voltage-domain
+ - rockchip,rk3228-io-voltage-domain
+ - rockchip,rk3288-io-voltage-domain
+ - rockchip,rk3328-io-voltage-domain
+ - rockchip,rk3368-io-voltage-domain
+ - rockchip,rk3368-pmu-io-voltage-domain
+ - rockchip,rk3399-io-voltage-domain
+ - rockchip,rk3399-pmu-io-voltage-domain
+ - rockchip,rv1108-io-voltage-domain
+ - rockchip,rv1108-pmu-io-voltage-domain
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: "#/$defs/px30"
+ - $ref: "#/$defs/px30-pmu"
+ - $ref: "#/$defs/rk3188"
+ - $ref: "#/$defs/rk3228"
+ - $ref: "#/$defs/rk3288"
+ - $ref: "#/$defs/rk3328"
+ - $ref: "#/$defs/rk3368"
+ - $ref: "#/$defs/rk3368-pmu"
+ - $ref: "#/$defs/rk3399"
+ - $ref: "#/$defs/rk3399-pmu"
+ - $ref: "#/$defs/rv1108"
+ - $ref: "#/$defs/rv1108-pmu"
+
+$defs:
+ px30:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,px30-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+ vccio5-supply:
+ description: The supply connected to VCCIO5.
+ vccio6-supply:
+ description: The supply connected to VCCIO6.
+ vccio-oscgpi-supply:
+ description: The supply connected to VCCIO_OSCGPI.
+
+ px30-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,px30-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmuio1-supply:
+ description: The supply connected to PMUIO1.
+ pmuio2-supply:
+ description: The supply connected to PMUIO2.
+
+ rk3188:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3188-io-voltage-domain
+
+ then:
+ properties:
+ ap0-supply:
+ description: The supply connected to AP0_VCC.
+ ap1-supply:
+ description: The supply connected to AP1_VCC.
+ cif-supply:
+ description: The supply connected to CIF_VCC.
+ flash-supply:
+ description: The supply connected to FLASH_VCC.
+ lcdc0-supply:
+ description: The supply connected to LCD0_VCC.
+ lcdc1-supply:
+ description: The supply connected to LCD1_VCC.
+ vccio0-supply:
+ description: The supply connected to VCCIO0.
+ vccio1-supply:
+ description: The supply connected to VCCIO1. Also labeled as VCCIO2.
+
+ rk3228:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3228-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+
+ rk3288:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-io-voltage-domain
+
+ then:
+ properties:
+ audio-supply:
+ description: The supply connected to APIO4_VDD.
+ bb-supply:
+ description: The supply connected to APIO5_VDD.
+ dvp-supply:
+ description: The supply connected to DVPIO_VDD.
+ flash0-supply:
+ description: The supply connected to FLASH0_VDD. Typically for eMMC.
+ flash1-supply:
+ description: The supply connected to FLASH1_VDD. Also known as SDIO1.
+ gpio30-supply:
+ description: The supply connected to APIO1_VDD.
+ gpio1830-supply:
+ description: The supply connected to APIO2_VDD.
+ lcdc-supply:
+ description: The supply connected to LCDC_VDD.
+ sdcard-supply:
+ description: The supply connected to SDMMC0_VDD.
+ wifi-supply:
+ description: The supply connected to APIO3_VDD. Also known as SDIO0.
+
+ rk3328:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3328-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+ vccio5-supply:
+ description: The supply connected to VCCIO5.
+ vccio6-supply:
+ description: The supply connected to VCCIO6.
+ pmuio-supply:
+ description: The supply connected to VCCIO_PMU.
+
+ rk3368:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3368-io-voltage-domain
+
+ then:
+ properties:
+ audio-supply:
+ description: The supply connected to APIO3_VDD.
+ dvp-supply:
+ description: The supply connected to DVPIO_VDD.
+ flash0-supply:
+ description: The supply connected to FLASH0_VDD. Typically for eMMC.
+ gpio30-supply:
+ description: The supply connected to APIO1_VDD.
+ gpio1830-supply:
+ description: The supply connected to APIO4_VDD.
+ sdcard-supply:
+ description: The supply connected to SDMMC0_VDD.
+ wifi-supply:
+ description: The supply connected to APIO2_VDD. Also known as SDIO0.
+
+ rk3368-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3368-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmu-supply:
+ description: The supply connected to PMUIO_VDD.
+ vop-supply:
+ description: The supply connected to LCDC_VDD.
+
+ rk3399:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3399-io-voltage-domain
+
+ then:
+ properties:
+ audio-supply:
+ description: The supply connected to APIO5_VDD.
+ bt656-supply:
+ description: The supply connected to APIO2_VDD.
+ gpio1830-supply:
+ description: The supply connected to APIO4_VDD.
+ sdmmc-supply:
+ description: The supply connected to SDMMC0_VDD.
+
+ rk3399-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3399-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmu1830-supply:
+ description: The supply connected to PMUIO2_VDD.
+
+ rv1108:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rv1108-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to APIO1_VDD.
+ vccio2-supply:
+ description: The supply connected to APIO2_VDD.
+ vccio3-supply:
+ description: The supply connected to APIO3_VDD.
+ vccio5-supply:
+ description: The supply connected to APIO5_VDD.
+ vccio6-supply:
+ description: The supply connected to APIO6_VDD.
+
+ rv1108-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rv1108-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmu-supply:
+ description: The supply connected to PMUIO_VDD.
+
+examples:
+ - |
+ io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ audio-supply = <&vcc18_codec>;
+ bb-supply = <&vcc33_io>;
+ dvp-supply = <&vcc_18>;
+ flash0-supply = <&vcc18_flashio>;
+ gpio1830-supply = <&vcc33_io>;
+ gpio30-supply = <&vcc33_pmuio>;
+ lcdc-supply = <&vcc33_lcd>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vcc18_wl>;
+ };
--
2.11.0
\
 
 \ /
  Last update: 2021-06-25 13:18    [W:0.246 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site