lkml.org 
[lkml]   [2021]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH V3 0/4] cpufreq: cppc: Add support for frequency invariance
    Hi Qian,

    On Thursday 24 Jun 2021 at 11:17:55 (-0400), Qian Cai wrote:
    >
    >
    > On 6/24/2021 6:48 AM, Ionela Voinescu wrote:
    > > Not if the counters are implemented properly. The kernel considers that
    > > both reference and delivered performance counters should stop or reset
    > > during idle. The kernel would not account for idle itself.
    > >
    > > If the reference performance counter does not stop during idle, while
    > > the core performance counter (delivered) does stop, the behavior above
    > > should be seen very often.
    > >
    > > Qian, do you see these small delivered performance values often or
    > > seldom?
    >
    > Ionela, so I managed to upgrade the kernel on the system to today's
    > linux-next which suppose to include this series. The delivered perf
    > is now 280. However, scaling_min_freq (200 MHz) is not equal to
    > lowest_perf (100).
    >
    > scaling_driver: acpi_cppc
    ^^^^^^^^^
    I suppose you mean "cppc-cpufreq"?

    "acpi_cppc" is not a scaling driver option.


    > scaling_governor: schedutil
    >
    > Is that normal because lowest_nonlinear_perf is 200?
    >

    Yes, that is right : [1]

    > Also, on this pretty idle system, 158 of 160 CPUs are always running
    > in max freq (280 MHz). The other 2 are running in 243 and 213 MHz
    > according to scaling_cur_freq. Apparently, "schedutil" does not work
    > proper on this system. I am going to try other governors to narrow
    > down the issue a bit.

    So your CPUs run at frequencies between 200MHz and 280MHz?
    Based on your acpi_cppc information below I would have assumed 2GHz as
    lowest nonlinear and 2.8GHz as nominal. The reason for this is that
    according to the ACPI spec the frequency values in the _CPC objects are
    supposed to be in MHz, so 2800 MHz for nominal frequency would be
    2.8GHz.

    When you try more governors, make sure to check out the difference
    between scaling_cur_freq and cpuinfo_cur_freq at [2]. The first gives
    you the frequency that the governor (schedutil) is asking for, while the
    second is giving you the current frequency obtained from the counters.

    So to check the actual frequency the cores are running at, please check
    cpuinfo_cur_freq.

    [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/cpufreq/cppc_cpufreq.c?h=v5.13-rc7#n296
    [2] https://www.kernel.org/doc/Documentation/cpu-freq/user-guide.txt

    Thanks,
    Ionela.

    >
    > FYI, here is the acpi_cppc registers reading:
    >
    > /sys/devices/system/cpu/cpu0/acpi_cppc/feedback_ctrs
    > ref:160705801 del:449594095
    > /sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf
    > 300
    > /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_freq
    > 1000
    > /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_nonlinear_perf
    > 200
    > /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_perf
    > 100
    > /sys/devices/system/cpu/cpu0/acpi_cppc/nominal_freq
    > 2800
    > /sys/devices/system/cpu/cpu0/acpi_cppc/nominal_perf
    > 280
    > /sys/devices/system/cpu/cpu0/acpi_cppc/reference_perf
    > 100
    > /sys/devices/system/cpu/cpu0/acpi_cppc/wraparound_time
    > 18446744073709551615

    \
     
     \ /
      Last update: 2021-06-25 12:21    [W:4.093 / U:0.052 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site