lkml.org 
[lkml]   [2021]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 3/4] dt-bindings: iio: adc: Add Xilinx AMS binding documentation
Date
Xilinx AMS have several ADC channels that can be used for measurement of
different voltages and temperatures. Document the same in the bindings.

Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
---
.../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 228 ++++++++++++++++++
1 file changed, 228 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
new file mode 100644
index 000000000000..a065ddd55d38
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale AMS controller
+
+maintainers:
+ - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
+
+description: |
+ The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors
+ that can be used to sample external voltages and monitor on-die operating
+ conditions, such as temperature and supply voltage levels.
+ The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and
+ PS (Processing System) SYSMON.
+ All designs should have AMS registers, but PS and PL are optional. The
+ AMS controller can work with only PS, only PL and both PS and PL
+ configurations. Please specify registers according to your design. Devicetree
+ should always have AMS module property. Providing PS & PL module is optional.
+
+ AMS Channel Details
+ ```````````````````
+ Sysmon Block |Channel| Details |Measurement
+ |Number | |Type
+ ---------------------------------------------------------------------------------------------------------
+ AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. |Voltage
+ |1 |Battery voltage measurement, VCC_PSBATT. |Voltage
+ |2 |PL Internal voltage measurement, VCCINT. |Voltage
+ |3 |Block RAM voltage measurement, VCCBRAM. |Voltage
+ |4 |PL Aux voltage measurement, VCCAUX. |Voltage
+ |5 |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL. |Voltage
+ |6 |VCC_PSINTFP_DDR voltage measurement. |Voltage
+ ---------------------------------------------------------------------------------------------------------
+ PS Sysmon |7 |LPD temperature measurement. |Temperature
+ |8 |FPD temperature measurement (REMOTE). |Temperature
+ |9 |VCC PS LPD voltage measurement (supply1). |Voltage
+ |10 |VCC PS FPD voltage measurement (supply2). |Voltage
+ |11 |PS Aux voltage reference (supply3). |Voltage
+ |12 |DDR I/O VCC voltage measurement. |Voltage
+ |13 |PS IO Bank 503 voltage measurement (supply5). |Voltage
+ |14 |PS IO Bank 500 voltage measurement (supply6). |Voltage
+ |15 |VCCO_PSIO1 voltage measurement. |Voltage
+ |16 |VCCO_PSIO2 voltage measurement. |Voltage
+ |17 |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC). |Voltage
+ |18 |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT). |Voltage
+ |19 |VCC_PSADC voltage measurement. |Voltage
+ ---------------------------------------------------------------------------------------------------------
+ PL Sysmon |20 |PL temperature measurement. |Temperature
+ |21 |PL Internal voltage measurement, VCCINT. |Voltage
+ |22 |PL Auxiliary voltage measurement, VCCAUX. |Voltage
+ |23 |ADC Reference P+ voltage measurement. |Voltage
+ |24 |ADC Reference N- voltage measurement. |Voltage
+ |25 |PL Block RAM voltage measurement, VCCBRAM. |Voltage
+ |26 |LPD Internal voltage measurement, VCC_PSINTLP (supply4). |Voltage
+ |27 |FPD Internal voltage measurement, VCC_PSINTFP (supply5). |Voltage
+ |28 |PS Auxiliary voltage measurement (supply6). |Voltage
+ |29 |PL VCCADC voltage measurement (vccams). |Voltage
+ |30 |Differential analog input signal voltage measurment. |Voltage
+ |31 |VUser0 voltage measurement (supply7). |Voltage
+ |32 |VUser1 voltage measurement (supply8). |Voltage
+ |33 |VUser2 voltage measurement (supply9). |Voltage
+ |34 |VUser3 voltage measurement (supply10). |Voltage
+ |35 |Auxiliary ch 0 voltage measurement (VAux0). |Voltage
+ |36 |Auxiliary ch 1 voltage measurement (VAux1). |Voltage
+ |37 |Auxiliary ch 2 voltage measurement (VAux2). |Voltage
+ |38 |Auxiliary ch 3 voltage measurement (VAux3). |Voltage
+ |39 |Auxiliary ch 4 voltage measurement (VAux4). |Voltage
+ |40 |Auxiliary ch 5 voltage measurement (VAux5). |Voltage
+ |41 |Auxiliary ch 6 voltage measurement (VAux6). |Voltage
+ |42 |Auxiliary ch 7 voltage measurement (VAux7). |Voltage
+ |43 |Auxiliary ch 8 voltage measurement (VAux8). |Voltage
+ |44 |Auxiliary ch 9 voltage measurement (VAux9). |Voltage
+ |45 |Auxiliary ch 10 voltage measurement (VAux10). |Voltage
+ |46 |Auxiliary ch 11 voltage measurement (VAux11). |Voltage
+ |47 |Auxiliary ch 12 voltage measurement (VAux12). |Voltage
+ |48 |Auxiliary ch 13 voltage measurement (VAux13). |Voltage
+ |49 |Auxiliary ch 14 voltage measurement (VAux14). |Voltage
+ |50 |Auxiliary ch 15 voltage measurement (VAux15). |Voltage
+ --------------------------------------------------------------------------------------------------------
+
+properties:
+ compatible:
+ enum:
+ - xlnx,zynqmp-ams
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ description: AMS Controller register space
+ maxItems: 1
+
+ ranges:
+ description:
+ Maps the child address space for PS and/or PL.
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ '#io-channel-cells':
+ const: 1
+
+patternProperties:
+ "^ams-ps@0,400$":
+ type: object
+ description: |
+ PS (Processing System) SYSMON is memory mapped to PS. This block has
+ built-in alarm generation logic that is used to interrupt the processor
+ based on condition set.
+
+ properties:
+ compatible:
+ enum:
+ - xlnx,zynqmp-ams-ps
+
+ reg:
+ description: Register Space for PS-SYSMON
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+
+ additionalProperties: false
+
+ "^ams-pl@400,400$":
+ type: object
+ description:
+ PL-SYSMON is capable of monitoring off chip voltage and temperature.
+ PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
+ from external master. Out of this interface currently only DRP is
+ supported. This block has alarm generation logic that is used to
+ interrupt the processor based on condition set.
+
+ properties:
+ compatible:
+ items:
+ - enum:
+ - xlnx,zynqmp-ams-pl
+
+ reg:
+ description: Register Space for PL-SYSMON.
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "^channel@([2-4][0-9]|50)$":
+ type: object
+ description:
+ Describes the external channels connected.
+
+ properties:
+ reg:
+ description:
+ Pair of pins the channel is connected to. This value is
+ same as Channel Number for a particular channel.
+ minimum: 20
+ maximum: 50
+
+ xlnx,bipolar:
+ $ref: /schemas/types.yaml#/definitions/flag
+ type: boolean
+ description:
+ If the set channel is used in bipolar mode.
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ xilinx_ams: ams@ffa50000 {
+ compatible = "xlnx,zynqmp-ams";
+ interrupt-parent = <&gic>;
+ interrupts = <0 56 4>;
+ reg = <0x0 0xffa50000 0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #io-channel-cells = <1>;
+ ranges = <0 0 0xffa50800 0x800>;
+
+ ams_ps: ams-ps@0,400 {
+ compatible = "xlnx,zynqmp-ams-ps";
+ reg = <0 0x400>;
+ };
+
+ ams_pl: ams-pl@400,400 {
+ compatible = "xlnx,zynqmp-ams-pl";
+ reg = <0x400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@30 {
+ reg = <30>;
+ xlnx,bipolar;
+ };
+ channel@31 {
+ reg = <31>;
+ };
+ channel@38 {
+ reg = <38>;
+ xlnx,bipolar;
+ };
+ };
+ };
+ };
--
2.17.1
\
 
 \ /
  Last update: 2021-06-24 20:30    [W:0.173 / U:0.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site