lkml.org 
[lkml]   [2021]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/8] bus: mhi: core: Validate channel ID when processing command completions
On Thu, Jun 24, 2021 at 08:02:48PM +0530, Manivannan Sadhasivam wrote:
> On Thu, Jun 24, 2021 at 03:50:45PM +0200, Greg KH wrote:
> > On Mon, Jun 21, 2021 at 09:46:09PM +0530, Manivannan Sadhasivam wrote:
> > > From: Bhaumik Bhatt <bbhatt@codeaurora.org>
> > >
> > > MHI reads the channel ID from the event ring element sent by the
> > > device which can be any value between 0 and 255. In order to
> > > prevent any out of bound accesses, add a check against the maximum
> > > number of channels supported by the controller and those channels
> > > not configured yet so as to skip processing of that event ring
> > > element.
> > >
> > > Cc: stable@vger.kernel.org
> > > Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> > > Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> > > Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
> > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> > > Link: https://lore.kernel.org/r/1619481538-4435-1-git-send-email-bbhatt@codeaurora.org
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > ---
> > > drivers/bus/mhi/core/main.c | 15 ++++++++++-----
> > > 1 file changed, 10 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> > > index 22acde118bc3..ed07421c4870 100644
> > > --- a/drivers/bus/mhi/core/main.c
> > > +++ b/drivers/bus/mhi/core/main.c
> > > @@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
> > > cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
> > >
> > > chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
> > > - mhi_chan = &mhi_cntrl->mhi_chan[chan];
> > > - write_lock_bh(&mhi_chan->lock);
> > > - mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> > > - complete(&mhi_chan->completion);
> > > - write_unlock_bh(&mhi_chan->lock);
> > > + WARN_ON(chan >= mhi_cntrl->max_chan);
> >
> > What can ever trigger this WARN_ON()? Do you mean to reboot a machine
> > if panic-on-warn is set?
> >
> > If this can actually happen, then check for it and recover properly,
> > don't just blindly warn and then keep on going.
> >
>
> We can't do much here other than warning the user and dropping the
> command.

But you didn't warn anyone. Well, you rebooted the machine, is that ok?
If this can be triggered by a user, this should never happen.

Do not use WARN_ON() ever please.

> There is no recovery possible because, the device has sent the command
> completion event on a wrong channel. It can't happen usually unless a
> malcious device sits on the other end.

Then just eat the message and move on, please do not crash the box.

thanks,

gre k-h

\
 
 \ /
  Last update: 2021-06-24 16:40    [W:0.067 / U:1.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site