lkml.org 
[lkml]   [2021]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses
On Wed, Jun 23, 2021 at 02:33:14PM +0000, Claudiu.Beznea@microchip.com wrote:
> On 23.06.2021 17:19, Alan Stern wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> >
> > On Wed, Jun 23, 2021 at 02:09:16PM +0000, Claudiu.Beznea@microchip.com wrote:
> >> On 23.06.2021 16:59, Alan Stern wrote:
> >>> One thing you might consider changing: The name of the
> >>> ohci_at91_port_suspend routine is misleading. It doesn't really
> >>> handle suspending the port; instead it handles the clocks that drive
> >>> the entire OHCI controller. Right?
> >>
> >> It does both as far as I can tell at the moment.
> >
> > But the name suggests that it only handles suspending a port. That's
> > misleading.
> >
> > And the way it is used in the SetPortFeature(USB_PORT_FEAT_SUSPEND)
> > case in ohci_at91_hub_control is just plain wrong. It won't merely
> > suspend a single port; it will disable the entire OHCI controller.
>
> Agree with all the above!

Are there any systems beside the SAMA7G5 and others you tested which
might be affected by this patch? Do they all work pretty much the
same way? (I want to make sure no others will be adversely affected
by this change.)

Alan Stern

\
 
 \ /
  Last update: 2021-06-23 18:43    [W:0.050 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site