lkml.org 
[lkml]   [2021]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] i2c: robotfuzz-osif: fix control-request directions
On Mon, May 24, 2021 at 11:09:12AM +0200, Johan Hovold wrote:
> The direction of the pipe argument must match the request-type direction
> bit or control requests may fail depending on the host-controller-driver
> implementation.
>
> Control transfers without a data stage are treated as OUT requests by
> the USB stack and should be using usb_sndctrlpipe(). Failing to do so
> will now trigger a warning.
>
> Fix the OSIFI2C_SET_BIT_RATE and OSIFI2C_STOP requests which erroneously
> used the osif_usb_read() helper and set the IN direction bit.
>
> Reported-by: syzbot+9d7dadd15b8819d73f41@syzkaller.appspotmail.com
> Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.")
> Cc: stable@vger.kernel.org # 3.14
> Cc: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Johan Hovold <johan@kernel.org>
> ---

Wolfram, can you pick this one up for 5.14?

Johan

> drivers/i2c/busses/i2c-robotfuzz-osif.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c
> index a39f7d092797..66dfa211e736 100644
> --- a/drivers/i2c/busses/i2c-robotfuzz-osif.c
> +++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c
> @@ -83,7 +83,7 @@ static int osif_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
> }
> }
>
> - ret = osif_usb_read(adapter, OSIFI2C_STOP, 0, 0, NULL, 0);
> + ret = osif_usb_write(adapter, OSIFI2C_STOP, 0, 0, NULL, 0);
> if (ret) {
> dev_err(&adapter->dev, "failure sending STOP\n");
> return -EREMOTEIO;
> @@ -153,7 +153,7 @@ static int osif_probe(struct usb_interface *interface,
> * Set bus frequency. The frequency is:
> * 120,000,000 / ( 16 + 2 * div * 4^prescale).
> * Using dev = 52, prescale = 0 give 100KHz */
> - ret = osif_usb_read(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0,
> + ret = osif_usb_write(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0,
> NULL, 0);
> if (ret) {
> dev_err(&interface->dev, "failure sending bit rate");

\
 
 \ /
  Last update: 2021-06-23 10:53    [W:2.361 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site