lkml.org 
[lkml]   [2021]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3] serial: samsung: use dma_ops of DMA if attached
Date
> > When DMA is used for TX and RX by serial driver, it should pass the
> > DMA device pointer to DMA API instead of UART device pointer. DMA
> > device should be used for DMA API because only the DMA device is aware
> > of how the device connects to the memory.
> > There might be an extra level of address translation due to a SMMU
> > attached to the DMA device. When serial device pointer device is used
> > for DMA API, the DMA API will have no clue of the SMMU attached to the
> > DMA device.
> >
> > This patch is necessary to fix the SMMU page faults which is observed
> > when a DMA(with SMMU enabled) is attached to UART for transfer.
> >
> > Signed-off-by: Tamseel Shams <m.shams@samsung.com>
> > Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> > ---
> > Changes since v1:
> > 1. Rebased the patch on "tty-next" branch of TTY driver tree
> >
> > Changes since v2:
> > 1. Updated the commit message.
> > 2. Changed the comment description
> >
> > drivers/tty/serial/samsung_tty.c | 62
> > +++++++++++++++++++++++++-------
> > 1 file changed, 50 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/tty/serial/samsung_tty.c
> > b/drivers/tty/serial/samsung_tty.c
> > index 9fbc61151c2e..7dd648cb7237 100644
> > --- a/drivers/tty/serial/samsung_tty.c
> > +++ b/drivers/tty/serial/samsung_tty.c
> > @@ -284,8 +284,13 @@ static void s3c24xx_serial_stop_tx(struct uart_port
> *port)
> > struct s3c24xx_uart_dma *dma = ourport->dma;
> > struct circ_buf *xmit = &port->state->xmit;
> > struct dma_tx_state state;
> > + struct device *dma_map_ops_dev = ourport->port.dev;
> > int count;
> >
> > + /* Null pointer check for "dma" and "dma->tx_chan" */
>
> The comment is not useful.
>
I will remove these comments.
> > + if (dma && dma->tx_chan)
> > + dma_map_ops_dev = dma->tx_chan->device->dev;
> > +
> > if (!ourport->tx_enabled)
> > return;
> >
> > @@ -305,7 +310,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port
> *port)
> > dmaengine_pause(dma->tx_chan);
> > dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
> > dmaengine_terminate_all(dma->tx_chan);
> > - dma_sync_single_for_cpu(ourport->port.dev,
> > + dma_sync_single_for_cpu(dma_map_ops_dev,
> > dma->tx_transfer_addr, dma->tx_size,
> DMA_TO_DEVICE);
> > async_tx_ack(dma->tx_desc);
> > count = dma->tx_bytes_requested - state.residue; @@ -331,14
> +336,19
> > @@ static void s3c24xx_serial_tx_dma_complete(void *args)
> > struct circ_buf *xmit = &port->state->xmit;
> > struct s3c24xx_uart_dma *dma = ourport->dma;
> > struct dma_tx_state state;
> > + struct device *dma_map_ops_dev = ourport->port.dev;
> > unsigned long flags;
> > int count;
> >
> > + /* Null pointer check for "dma" and "dma->tx_chan" */
> > + if (dma && dma->tx_chan)
>
>
> What is the "else" here? How is it even possible? Why having this "if"
> at all?
>
As mentioned in my reply (https://lkml.org/lkml/2021/6/23/6) to
Robin's comments for patch version 2, I will be removing these
"if" conditions, and directly assign DMA device pointers.

> > + dma_map_ops_dev = dma->tx_chan->device->dev;
> > +
> > dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
> > count = dma->tx_bytes_requested - state.residue;
> > async_tx_ack(dma->tx_desc);
> >
> > - dma_sync_single_for_cpu(ourport->port.dev, dma->tx_transfer_addr,
> > + dma_sync_single_for_cpu(dma_map_ops_dev, dma->tx_transfer_addr,
> > dma->tx_size, DMA_TO_DEVICE);
> >
> > spin_lock_irqsave(&port->lock, flags); @@ -436,6 +446,11 @@ static
> > int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
> > struct uart_port *port = &ourport->port;
> > struct circ_buf *xmit = &port->state->xmit;
> > struct s3c24xx_uart_dma *dma = ourport->dma;
> > + struct device *dma_map_ops_dev = ourport->port.dev;
> > +
> > + /* Null pointer check for "dma" and "dma->tx_chan" */
> > + if (dma && dma->tx_chan)
> > + dma_map_ops_dev = dma->tx_chan->device->dev;
> >
> > if (ourport->tx_mode != S3C24XX_TX_DMA)
> > enable_tx_dma(ourport);
> > @@ -443,7 +458,7 @@ static int s3c24xx_serial_start_tx_dma(struct
> s3c24xx_uart_port *ourport,
> > dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
> > dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
> >
> > - dma_sync_single_for_device(ourport->port.dev, dma-
> >tx_transfer_addr,
> > + dma_sync_single_for_device(dma_map_ops_dev, dma-
> >tx_transfer_addr,
> > dma->tx_size, DMA_TO_DEVICE);
> >
> > dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan,
> > @@ -510,12 +525,17 @@ static void s3c24xx_uart_copy_rx_to_tty(struct
> s3c24xx_uart_port *ourport,
> > struct tty_port *tty, int count)
> > {
> > struct s3c24xx_uart_dma *dma = ourport->dma;
> > + struct device *dma_map_ops_dev = ourport->port.dev;
> > int copied;
> >
> > + /* Null pointer check for "dma" and "dma->rx_chan" */
> > + if (dma && dma->rx_chan)
> > + dma_map_ops_dev = dma->rx_chan->device->dev;
> > +
> > if (!count)
> > return;
> >
> > - dma_sync_single_for_cpu(ourport->port.dev, dma->rx_addr,
> > + dma_sync_single_for_cpu(dma_map_ops_dev, dma->rx_addr,
> > dma->rx_size, DMA_FROM_DEVICE);
> >
> > ourport->port.icount.rx += count;
> > @@ -635,8 +655,13 @@ static void s3c24xx_serial_rx_dma_complete(void
> > *args) static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port
> > *ourport) {
> > struct s3c24xx_uart_dma *dma = ourport->dma;
> > + struct device *dma_map_ops_dev = ourport->port.dev;
> > +
> > + /* Null pointer check for "dma" and "dma->rx_chan" */
> > + if (dma && dma->rx_chan)
> > + dma_map_ops_dev = dma->rx_chan->device->dev;
> >
> > - dma_sync_single_for_device(ourport->port.dev, dma->rx_addr,
> > + dma_sync_single_for_device(dma_map_ops_dev, dma->rx_addr,
> > dma->rx_size, DMA_FROM_DEVICE);
> >
> > dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan,
> > @@ -1045,6 +1070,7 @@ static int s3c24xx_serial_request_dma(struct
> s3c24xx_uart_port *p)
> > struct s3c24xx_uart_dma *dma = p->dma;
> > struct dma_slave_caps dma_caps;
> > const char *reason = NULL;
> > + struct device *dma_map_ops_dev = p->port.dev;
> > int ret;
> >
> > /* Default slave configuration parameters */ @@ -1102,18 +1128,25
> @@
> > static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
> > goto err_release_tx;
> > }
> >
> > - dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf,
> > + /* Null pointer check for "dma" and "dma->rx_chan" */
> > + if (dma && dma->rx_chan)
> > + dma_map_ops_dev = dma->rx_chan->device->dev;
> > +
> > + dma->rx_addr = dma_map_single(dma_map_ops_dev, dma->rx_buf,
> > dma->rx_size, DMA_FROM_DEVICE);
> > - if (dma_mapping_error(p->port.dev, dma->rx_addr)) {
> > + if (dma_mapping_error(dma_map_ops_dev, dma->rx_addr)) {
> > reason = "DMA mapping error for RX buffer";
> > ret = -EIO;
> > goto err_free_rx;
> > }
> >
> > + /* Null pointer check for "dma" and "dma->tx_chan" */
> > + if (dma && dma->tx_chan)
> > + dma_map_ops_dev = dma->tx_chan->device->dev;
> > /* TX buffer */
> > - dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf,
> > + dma->tx_addr = dma_map_single(dma_map_ops_dev,
> > +p->port.state->xmit.buf,
> > UART_XMIT_SIZE, DMA_TO_DEVICE);
> > - if (dma_mapping_error(p->port.dev, dma->tx_addr)) {
> > + if (dma_mapping_error(dma_map_ops_dev, dma->tx_addr)) {
> > reason = "DMA mapping error for TX buffer";
> > ret = -EIO;
> > goto err_unmap_rx;
> > @@ -1122,7 +1155,9 @@ static int s3c24xx_serial_request_dma(struct
> s3c24xx_uart_port *p)
> > return 0;
> >
> > err_unmap_rx:
> > - dma_unmap_single(p->port.dev, dma->rx_addr, dma->rx_size,
> > + if (dma->rx_chan)
> > + dma_map_ops_dev = dma->rx_chan->device->dev;
> > + dma_unmap_single(dma_map_ops_dev, dma->rx_addr, dma->rx_size,
> > DMA_FROM_DEVICE);
> > err_free_rx:
> > kfree(dma->rx_buf);
> > @@ -1139,10 +1174,12 @@ static int s3c24xx_serial_request_dma(struct
> > s3c24xx_uart_port *p) static void s3c24xx_serial_release_dma(struct
> > s3c24xx_uart_port *p) {
> > struct s3c24xx_uart_dma *dma = p->dma;
> > + struct device *dma_map_ops_dev = p->port.dev;
> >
> > if (dma->rx_chan) {
> > + dma_map_ops_dev = dma->rx_chan->device->dev;
> > dmaengine_terminate_all(dma->rx_chan);
> > - dma_unmap_single(p->port.dev, dma->rx_addr,
> > + dma_unmap_single(dma_map_ops_dev, dma->rx_addr,
> > dma->rx_size, DMA_FROM_DEVICE);
> > kfree(dma->rx_buf);
> > dma_release_channel(dma->rx_chan);
> > @@ -1150,8 +1187,9 @@ static void s3c24xx_serial_release_dma(struct
> s3c24xx_uart_port *p)
> > }
> >
> > if (dma->tx_chan) {
> > + dma_map_ops_dev = dma->tx_chan->device->dev;
> > dmaengine_terminate_all(dma->tx_chan);
> > - dma_unmap_single(p->port.dev, dma->tx_addr,
> > + dma_unmap_single(dma_map_ops_dev, dma->tx_addr,
> > UART_XMIT_SIZE, DMA_TO_DEVICE);
> > dma_release_channel(dma->tx_chan);
> > dma->tx_chan = NULL;
> >
>
>
> Best regards,
> Krzysztof

Thanks & Regards,
Tamseel Shams

\
 
 \ /
  Last update: 2021-06-23 09:59    [W:0.057 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site