lkml.org 
[lkml]   [2021]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] net: bcmgenet: Fix attaching to PYH failed on RPi 4B
Florian Fainelli <f.fainelli@gmail.com> 於 2021年6月24日 週四 上午5:19寫道:
>
> On 6/23/21 1:50 PM, patchwork-bot+netdevbpf@kernel.org wrote:
> > Hello:
> >
> > This patch was applied to netdev/net.git (refs/heads/master):
> >
> > On Wed, 23 Jun 2021 11:28:03 +0800 you wrote:
> >> The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late.
> >> So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads
> >> GENET fail to attach the PHY as following log:
> >>
> >> bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
> >> ...
> >> could not attach to PHY
> >> bcmgenet fd580000.ethernet eth0: failed to connect to PHY
> >> uart-pl011 fe201000.serial: no DMA platform data
> >> libphy: bcmgenet MII bus: probed
> >> ...
> >> unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
> >>
> >> [...]
> >
> > Here is the summary with links:
> > - [v2] net: bcmgenet: Fix attaching to PYH failed on RPi 4B
> > https://git.kernel.org/netdev/net/c/b2ac9800cfe0

This bot is interesting!!! Good feature! :)

> There was feedback given that could have deserved a v3, if nothing else
> to fix the typo in the subject, I suppose that would do though.

I can prepare the v3 patch with Florian's suggestion!

Jian-Hong Pan

\
 
 \ /
  Last update: 2021-06-24 04:48    [W:0.087 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site