lkml.org 
[lkml]   [2021]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/3] zram: fix deadlock with sysfs attribute usage and driver removal
On Tue, Jun 22, 2021 at 09:45:39AM +0200, Greg KH wrote:
> On Mon, Jun 21, 2021 at 04:36:34PM -0700, Luis Chamberlain wrote:
> > When sysfs attributes use a lock also used on driver removal we can
> > potentially deadlock. This happens when for instance a sysfs file on
> > a driver is used, then at the same time we have driver removal trigger.
> > The driver removal code holds a lock, and then the sysfs file entry waits
> > for the same lock. While holding the lock the driver removal tries to
> > remove the sysfs entries, but these cannot be removed yet as one is
> > waiting for a lock. This won't complete as the lock is already held.
> > Likewise module removal cannot complete, and so we deadlock.
>
> This is all about removing modules, not about "driver removal" from a
> device. Please make the subject line here more explicit.

Sure.

> > To fix this we just *try* to get a refcount to the module when a shared
> > lock is used, prior to mucking with a sysfs attribute. If this fails we
> > just give up right away.
> >
> > We use a try method as a full lock means we'd then make our sysfs attributes
> > busy us out from possible module removal, and so userspace could force denying
> > module removal, a silly form of "DOS" against module removal. A try lock on
> > the module removal ensures we give priority to module removal and interacting
> > with sysfs attributes only comes second. Using a full lock could mean for
> > instance that if you don't stop poking at sysfs files you cannot remove a
> > module.
> >
> > This deadlock was first reported with the zram driver, a sketch of how
> > this can happen follows:
> >
> > CPU A CPU B
> > whatever_store()
> > module_unload
> > mutex_lock(foo)
> > mutex_lock(foo)
> > del_gendisk(zram->disk);
> > device_del()
> > device_remove_groups()
>
> Can you duplicate this in a real-world situation?
>
> What tools remove the zram module from the system on the fly?

A customer did run into it through a series of automated tests. I was
able to finally reproduce with the instructions given below. I
simplified it given that the series of test the customer was running
was much more complex.

> > In this situation whatever_store() is waiting for the mutex foo to
> > become unlocked, but that won't happen until module removal is complete.
> > But module removal won't complete until the syfs file being poked completes
> > which is waiting for a lock already held.
> >
> > This is a generic kernel issue with sysfs files which use any lock also
> > used on module removal. Different generic solutions have been proposed.
> > One approach proposed is by directly by augmenting attributes with module
> > information [0]. This patch implements a solution by adding macros with
> > the prefix MODULE_DEVICE_ATTR_*() which accomplish the same. Until we
> > don't have a generic agreed upon solution for this shared between drivers,
> > we must implement a fix for this on each driver.
> >
> > We make zram use the new MODULE_DEVICE_ATTR_*() helpers, and completely
> > open code the solution for class attributes as there are only a few of
> > those.
> >
> > This issue can be reproduced easily on the zram driver as follows:
> >
> > Loop 1 on one terminal:
> >
> > while true;
> > do modprobe zram;
> > modprobe -r zram;
> > done
> >
> > Loop 2 on a second terminal:
> > while true; do
> > echo 1024 > /sys/block/zram0/disksize;
> > echo 1 > /sys/block/zram0/reset;
> > done
>
> As fun as this is, it's not a real workload, please do not pretend that
> it is.

Whoever said that it was? This is just a way to reproduce an issue which
was reported.

> And your code is still racy, see below. You just made the window even
> smaller, which you still should be objecting to as you somehow feel this
> is a valid usecase :)
>
> > @@ -2048,13 +2048,19 @@ static ssize_t hot_add_show(struct class *class,
> > {
> > int ret;
> >
> > + if (!try_module_get(THIS_MODULE))
> > + return -ENODEV;
> > +
>
> You can not increment/decrement your own module's reference count and
> expect it to work properly, as it is still a race.

The goal here is to prevent an rmmod call if this succeeds. If it
succeeds then any subsequent rmmod will fail. Can you explain how
this is still racy?

Luis

\
 
 \ /
  Last update: 2021-06-22 18:33    [W:0.084 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site