Messages in this thread | | | Date | Tue, 22 Jun 2021 22:48:14 +0800 | From | 周琰杰 <> | Subject | Re: [PATCH v2 0/6] clk: Ingenic JZ4760(B) support |
| |
Hi,
A gentle ping :)
Here are some new patches that need to be based on this series.
Thanks and best regards!
于 Sun, 30 May 2021 17:49:17 +0100 Paul Cercueil <paul@crapouillou.net> 写道:
> Hi, > > Here is (finally) my v2 of the JZ4760(B) patchset. > > Patches 1-5 are the exact same as in v1. > > Patch 6's algorithm was updated with Zhou's feedback. > > Cheers, > -Paul > > Paul Cercueil (6): > dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles > clk: Support bypassing dividers > clk: ingenic: Read bypass register only when there is one > clk: ingenic: Remove pll_info.no_bypass_bit > clk: ingenic: Support overriding PLLs M/N/OD calc algorithm > clk: ingenic: Add support for the JZ4760 > > .../bindings/clock/ingenic,cgu.yaml | 4 + > drivers/clk/ingenic/Kconfig | 10 + > drivers/clk/ingenic/Makefile | 1 + > drivers/clk/ingenic/cgu.c | 92 ++-- > drivers/clk/ingenic/cgu.h | 12 +- > drivers/clk/ingenic/jz4725b-cgu.c | 12 +- > drivers/clk/ingenic/jz4740-cgu.c | 12 +- > drivers/clk/ingenic/jz4760-cgu.c | 428 > ++++++++++++++++++ drivers/clk/ingenic/jz4770-cgu.c | > 15 +- drivers/clk/ingenic/tcu.c | 2 + > include/dt-bindings/clock/jz4760-cgu.h | 54 +++ > 11 files changed, 586 insertions(+), 56 deletions(-) > create mode 100644 drivers/clk/ingenic/jz4760-cgu.c > create mode 100644 include/dt-bindings/clock/jz4760-cgu.h >
| |