lkml.org 
[lkml]   [2021]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] media: uvc: limit max bandwidth for HDMI capture
Em Tue, 22 Jun 2021 11:59:10 +0300
Laurent Pinchart <laurent.pinchart@ideasonboard.com> escreveu:

> On Tue, Jun 22, 2021 at 09:50:37AM +0100, Dave Stevenson wrote:
> > On Tue, 22 Jun 2021 at 09:29, Mauro Carvalho Chehab wrote:
> > > Em Mon, 21 Jun 2021 21:22:26 +0300 Laurent Pinchart escreveu:
> > >
> > > > Hi Mauro,
> > > >
> > > > Thank you for the patch.
> > >
> > > Thanks for reviewing it!
> > >
> > > >
> > > > On Mon, Feb 01, 2021 at 08:08:59PM +0100, Mauro Carvalho Chehab wrote:
> > > > > This device:
> > > > > 534d:2109 MacroSilicon
> > > > >
> > > > > Announces that it supports several frame intervals for
> > > > > their resolutions for MJPEG compression:
> > > > >
> > > > > VideoStreaming Interface Descriptor:
> > > > > bLength 46
> > > > > bDescriptorType 36
> > > > > bDescriptorSubtype 7 (FRAME_MJPEG)
> > > > > bFrameIndex 1
> > > > > bmCapabilities 0x00
> > > > > Still image unsupported
> > > > > wWidth 1920
> > > > > wHeight 1080
> > > > > dwMinBitRate 768000
> > > > > dwMaxBitRate 196608000
> > > > > dwMaxVideoFrameBufferSize 4147200
> > > > > dwDefaultFrameInterval 166666
> > > > > bFrameIntervalType 5
> > > > > dwFrameInterval( 0) 166666
> > > > > dwFrameInterval( 1) 333333
> > > > > dwFrameInterval( 2) 400000
> > > > > dwFrameInterval( 3) 500000
> > > > > dwFrameInterval( 4) 1000000
> > > > >
> > > > > However, the highest frame interval (166666), which means 60 fps
> > > > > is not supported. For such resolution, the maximum interval
> > > > > is, instead 333333 (30 fps).
> > > >
> > > > What happens if you try to select it ?
> > >
> > > Basically, URBs get lost: they cause apps like qv4l2 to crash
> > > sometimes, with:
> > >
> > > v4l-convert: libjpeg error: Corrupt JPEG data: premature end of data segment
> > >
> > > The image keeps blinking, and part of the image is replaced by
> > > white noise.
> > >
> > > Clearly, it tries to send more data than the maximum available bandwidth
> > > on this chipset.
> >
> > What platform are you running this on?
> > I've previously encountered a USB3 camera module where the datastream
> > was VERY bursty. The memcpy of the data from URB to V4L2 buffer took
> > long enough that sometimes the module didn't have an URB to fill at
> > the appropriate moment, and it dropped data. I seem to recall
> > increasing UVC_URBS from the default of 5 to 10 to handle the peak
> > data rate without loss, but it may have been higher still. This was on
> > a ~1.5GHz Atom processor, so not lacking in performance.
> >
> > I wonder if the same is true in your case. If it's MJPEG compressed
> > then the peak rate may again be high. Just a thought.
>
> It's worth investigating indeed. How often are URBs dropped ? Does it
> occur for every frame, or once in a while ?

It occurs on every frame. Monitoring the traffic with usbtop shows
that about the same amount of data is shown when selecting 30 or 60
fps.

Btw, the manual of the device clearly says that it supports only 30
fps at the maximum resolution.

What's happening is that the USB descriptors are not correct.

Btw, this is the device:

https://www.amazon.de/-/en/gp/product/B088NWWSKN

I'm basically using it (together with a Logitech nano receiver) as
a cheap KVM device :-)

Thanks,
Mauro

\
 
 \ /
  Last update: 2021-06-22 11:10    [W:0.057 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site