Messages in this thread Patch in this message | | | From | Jian-Hong Pan <> | Subject | [PATCH v2] net: bcmgenet: Fix attaching to PYH failed on RPi 4B | Date | Wed, 23 Jun 2021 11:28:03 +0800 |
| |
The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late. So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads GENET fail to attach the PHY as following log:
bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 ... could not attach to PHY bcmgenet fd580000.ethernet eth0: failed to connect to PHY uart-pl011 fe201000.serial: no DMA platform data libphy: bcmgenet MII bus: probed ... unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
This patch adds the soft dependency to load mdio-bcm-unimac module before genet module to avoid the issue.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=213485 Signed-off-by: Jian-Hong Pan <jhp@endlessos.org> --- v2: Load mdio-bcm-unimac before genet module instead of trying to connect the PHY in a loop.
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index fcca023f22e5..41f7f078cd27 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -4296,3 +4296,4 @@ MODULE_AUTHOR("Broadcom Corporation"); MODULE_DESCRIPTION("Broadcom GENET Ethernet controller driver"); MODULE_ALIAS("platform:bcmgenet"); MODULE_LICENSE("GPL"); +MODULE_SOFTDEP("pre: mdio-bcm-unimac"); -- 2.32.0
| |