lkml.org 
[lkml]   [2021]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFCv1 7/8] phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode.
Hi Anand,

On Mon, Jun 21, 2021 at 9:15 AM Anand Moon <linux.amoon@gmail.com> wrote:
>
> Hi Martin,
>
> On Fri, 18 Jun 2021 at 04:07, Martin Blumenstingl
> <martin.blumenstingl@googlemail.com> wrote:
> >
> > Hi Anand,
> >
> > On Thu, Jun 17, 2021 at 9:44 PM Anand Moon <linux.amoon@gmail.com> wrote:
> > [...]
> > > @@ -245,8 +250,6 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
> > > regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_FSEL_MASK,
> > > 0x5 << REG_CTRL_FSEL_SHIFT);
> > > /* reset the PHY */
> > > - regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET,
> > > - REG_CTRL_POWER_ON_RESET);
> > The vendor driver uses the following sequence for the power on reset:
> > - set the power on reset bit
> > - wait 500us
> > - clear the power on reset bit
> > - wait 500us
> >
> > With your change we now:
> > - wait 500us
> > - clear the power on reset bit
> > - wait 500us
> >
> > I don't know if this is sufficient to bring the PHY into a well-defined state.
> > Maybe it works, maybe it doesn't reset at all in this case - I don't
> > know how to verify this though.
> >
> Initially, I tried to some bit mask code to resolve this but it failed,
> So no harm in keeping the original changes.
yes, I feel more comfortable with that

> There is another parameter REG_CTRL_PORT_RESET to be considered.
none of the vendor kernels that I have sets or clears this bit explicitly
I agree that the name seems related, but due to lack of an example or
documentation how/when to use this bit I suggest we don't touch it for
now


Best rergards,
Martin

\
 
 \ /
  Last update: 2021-06-22 22:01    [W:0.071 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site