lkml.org 
[lkml]   [2021]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel
Hi Stefan,

Thank you for the patch.

On Mon, Jun 21, 2021 at 08:22:10AM +0000, Stefan Riedmüller wrote:
> Hi,
>
> another gentle ping.

Sorry for the delay, I have way too little bandwidth these days :-S

> Also adding Laurent Pinchart to CC.
>
> On Wed, 2021-05-26 at 07:34 +0000, Stefan Riedmüller wrote:
> > On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote:
> > > The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG.
> > > Add the corresponding connector type and 8 bpc as default bus_format.
> > >
> > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

It will be interesting to add support for the 6bpp mode at some point (I
assume through a custom DT property that reports the state of the
panel's SEL68 pin, as it should be strapped in most cases).

> > > ---
> > > drivers/gpu/drm/panel/panel-simple.c | 2 ++
> > > 1 file changed, 2 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > > b/drivers/gpu/drm/panel/panel-simple.c
> > > index 4e2dad314c79..44583d0ed902 100644
> > > --- a/drivers/gpu/drm/panel/panel-simple.c
> > > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > > @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = {
> > > .width = 211,
> > > .height = 158,
> > > },
> > > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
> > > + .connector_type = DRM_MODE_CONNECTOR_LVDS,
> > > };
> > >
> > > static const struct drm_display_mode auo_g121ean01_mode = {

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2022-09-17 16:10    [W:0.576 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site