lkml.org 
[lkml]   [2021]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/2] ASoC: sunxi: Add Allwinner H6 Digital MIC driver
Date
On 6/16/21 1:21 AM, 班涛 wrote:
> Hi,
>
> Samuel Holland <samuel@sholland.org> 于2021年6月16日周三 上午11:06写道:
>
>> Hello,
>>
>> On 6/15/21 8:03 AM, Ban Tao wrote:
>>> The Allwinner H6 and later SoCs have an DMIC block
>>> which is capable of capture.
>>>
>>> Signed-off-by: Ban Tao <fengzheng923@gmail.com>
>>> ---
>>> MAINTAINERS | 7 +
>>> sound/soc/sunxi/Kconfig | 8 +
>>> sound/soc/sunxi/Makefile | 1 +
>>> sound/soc/sunxi/sun50i-dmic.c | 408 ++++++++++++++++++++++++++++++++++
>>> 4 files changed, 424 insertions(+)
>>> create mode 100644 sound/soc/sunxi/sun50i-dmic.c
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index b4094f07214e..1b87225c39b0 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -760,6 +760,13 @@ L: linux-media@vger.kernel.org
>>> S: Maintained
>>> F: drivers/staging/media/sunxi/cedrus/
>>>
>>> +ALLWINNER DMIC DRIVERS
>>> +M: Ban Tao <fengzheng923@gmail.com>
>>> +L: alsa-devel@alsa-project.org (moderated for non-subscribers)
>>> +S: Maintained
>>> +F:
>> Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
>>> +F: sound/soc/sunxi/sun50i-dmic.c
>>> +
>>> ALPHA PORT
>>> M: Richard Henderson <rth@twiddle.net>
>>> M: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
>>> diff --git a/sound/soc/sunxi/Kconfig b/sound/soc/sunxi/Kconfig
>>> index ddcaaa98d3cb..2a3bf7722e11 100644
>>> --- a/sound/soc/sunxi/Kconfig
>>> +++ b/sound/soc/sunxi/Kconfig
>>> @@ -56,6 +56,14 @@ config SND_SUN4I_SPDIF
>>> Say Y or M to add support for the S/PDIF audio block in the
>> Allwinner
>>> A10 and affiliated SoCs.
>>>
>>> +config SND_SUN50I_DMIC
>>> + tristate "Allwinner H6 DMIC Support"
>>> + depends on (OF && ARCH_SUNXI) || COMPILE_TEST
>>> + select SND_SOC_GENERIC_DMAENGINE_PCM
>>> + help
>>> + Say Y or M to add support for the DMIC audio block in the
>> Allwinner
>>> + H6 and affiliated SoCs.
>>> +
>>> config SND_SUN8I_ADDA_PR_REGMAP
>>> tristate
>>> select REGMAP
>>> diff --git a/sound/soc/sunxi/Makefile b/sound/soc/sunxi/Makefile
>>> index a86be340a076..4483fe9c94ef 100644
>>> --- a/sound/soc/sunxi/Makefile
>>> +++ b/sound/soc/sunxi/Makefile
>>> @@ -6,3 +6,4 @@ obj-$(CONFIG_SND_SUN8I_CODEC_ANALOG) +=
>> sun8i-codec-analog.o
>>> obj-$(CONFIG_SND_SUN50I_CODEC_ANALOG) += sun50i-codec-analog.o
>>> obj-$(CONFIG_SND_SUN8I_CODEC) += sun8i-codec.o
>>> obj-$(CONFIG_SND_SUN8I_ADDA_PR_REGMAP) += sun8i-adda-pr-regmap.o
>>> +obj-$(CONFIG_SND_SUN50I_DMIC) += sun50i-dmic.o
>>> diff --git a/sound/soc/sunxi/sun50i-dmic.c
>> b/sound/soc/sunxi/sun50i-dmic.c
>>> new file mode 100644
>>> index 000000000000..78d512d93974
>>> --- /dev/null
>>> +++ b/sound/soc/sunxi/sun50i-dmic.c
>>> @@ -0,0 +1,408 @@
>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>> +/*
>>> + * ALSA SoC DMIC Audio Layer
>>> + *
>>> + * Copyright 2021 Ban Tao <fengzheng923@gmail.com>
>>> + *
>>> + */
>>> +
>>> +#include <linux/clk.h>
>>> +#include <linux/device.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/module.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/pm_runtime.h>
>>> +#include <linux/reset.h>
>>> +#include <sound/dmaengine_pcm.h>
>>> +#include <sound/pcm_params.h>
>>> +#include <sound/soc.h>
>>> +
>>> +
>>> +#define SUN50I_DMIC_EN_CTL (0x00)
>>> + #define SUN50I_DMIC_EN_CTL_GLOBE BIT(8)
>>> + #define SUN50I_DMIC_EN_CTL_CHAN(v) ((v) << 0)
>>> + #define SUN50I_DMIC_EN_CTL_CHAN_MASK GENMASK(7, 0)
>>> +#define SUN50I_DMIC_SR (0x04)
>>> + #define SUN50I_DMIC_SR_SAMOLE_RATE(v) ((v) << 0)
>>> + #define SUN50I_DMIC_SR_SAMOLE_RATE_MASK GENMASK(2, 0)
>>> +#define SUN50I_DMIC_CTL (0x08)
>>> + #define SUN50I_DMIC_CTL_OVERSAMPLE_RATE BIT(0)
>>> +#define SUN50I_DMIC_DATA (0x10)
>>> +#define SUN50I_DMIC_INTC (0x14)
>>> + #define SUN50I_DMIC_FIFO_DRQ_EN BIT(2)
>>> +#define SUN50I_DMIC_INT_STA (0x18)
>>> + #define SUN50I_DMIC_INT_STA_OVERRUN_IRQ_PENDING BIT(1)
>>> + #define SUN50I_DMIC_INT_STA_DATA_IRQ_PENDING BIT(0)
>>> +#define SUN50I_DMIC_RXFIFO_CTL (0x1c)
>>> + #define SUN50I_DMIC_RXFIFO_CTL_FLUSH BIT(31)
>>> + #define SUN50I_DMIC_RXFIFO_CTL_MODE BIT(9)
>>> + #define SUN50I_DMIC_RXFIFO_CTL_RESOLUTION BIT(8)
>>> +#define SUN50I_DMIC_CH_NUM (0x24)
>>> + #define SUN50I_DMIC_CH_NUM_N(v) ((v) << 0)
>>> + #define SUN50I_DMIC_CH_NUM_N_MASK GENMASK(2, 0)
>>> +#define SUN50I_DMIC_CNT (0x2c)
>>> + #define SUN50I_DMIC_CNT_N BIT(0)
>>> +#define SUN50I_DMIC_HPF_CTRL (0x38)
>>> +#define SUN50I_DMIC_VERSION (0x50)
>>> +
>>> +
>>> +struct sun50i_dmic_dev {
>>> + struct platform_device *pdev;
>>> + struct clk *dmic_clk;
>>> + struct clk *apb_clk;
>>> + struct reset_control *rst;
>>> + struct regmap *regmap;
>>> + struct snd_dmaengine_dai_dma_data dma_params_rx;
>>> + unsigned int chan_en;
>>> +};
>>> +
>>> +struct dmic_rate {
>>> + unsigned int samplerate;
>>> + unsigned int rate_bit;
>>> +};
>>> +
>>> +static void sun50i_snd_rxctrl_enable(struct snd_pcm_substream
>> *substream,
>>> + struct sun50i_dmic_dev *host, bool
>> enable)
>>> +{
>>> + if (enable) {
>>> + /* DRQ ENABLE */
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_INTC,
>>> + SUN50I_DMIC_FIFO_DRQ_EN,
>>> + SUN50I_DMIC_FIFO_DRQ_EN);
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_EN_CTL,
>>> + SUN50I_DMIC_EN_CTL_CHAN_MASK,
>>> + SUN50I_DMIC_EN_CTL_CHAN(host->chan_en));
>>> + /* Global enable */
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_EN_CTL,
>>> + SUN50I_DMIC_EN_CTL_GLOBE,
>>> + SUN50I_DMIC_EN_CTL_GLOBE);
>>> + } else {
>>> + /* DRQ DISABLE */
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_INTC,
>>> + SUN50I_DMIC_FIFO_DRQ_EN, 0);
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_EN_CTL,
>>> + SUN50I_DMIC_EN_CTL_CHAN_MASK,
>>> + SUN50I_DMIC_EN_CTL_CHAN(0));
>>> + /* Global disable */
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_EN_CTL,
>>> + SUN50I_DMIC_EN_CTL_GLOBE, 0);
>>> + }
>>> +}
>>> +
>>> +static int sun50i_dmic_startup(struct snd_pcm_substream *substream,
>>> + struct snd_soc_dai *cpu_dai)
>>> +{
>>> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
>>> + struct sun50i_dmic_dev *host =
>> snd_soc_dai_get_drvdata(rtd->cpu_dai);
>>
>> This is equivalent to the simpler code you use below:
>>
>> struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(cpu_dai);
>>
>>> +
>>> + /* only support capture */
>>> + if (substream->stream != SNDRV_PCM_STREAM_CAPTURE)
>>> + return -EINVAL;
>>> +
>>> + regmap_write(host->regmap, SUN50I_DMIC_INT_STA,
>>> + SUN50I_DMIC_INT_STA_OVERRUN_IRQ_PENDING |
>>> + SUN50I_DMIC_INT_STA_DATA_IRQ_PENDING);
>>
>> The interrupt is never enabled, so do we really care about IRQ status?
>>
>
> Ok, I will delete it .
>
>>
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL,
>>> + SUN50I_DMIC_RXFIFO_CTL_FLUSH,
>>> + SUN50I_DMIC_RXFIFO_CTL_FLUSH);
>>> + regmap_write(host->regmap, SUN50I_DMIC_CNT, SUN50I_DMIC_CNT_N);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int sun50i_dmic_hw_params(struct snd_pcm_substream *substream,
>>> + struct snd_pcm_hw_params *params,
>>> + struct snd_soc_dai *cpu_dai)
>>> +{
>>> + int i = 0;
>>> + unsigned long rate = params_rate(params);
>>> + unsigned int channels = params_channels(params);
>>> + struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(cpu_dai);
>>> + struct platform_device *pdev = host->pdev;
>>> + struct dmic_rate dmic_rate_s[] = {
>>> + {44100, 0x0},
>>> + {48000, 0x0},
>>> + {22050, 0x2},
>>> + {24000, 0x2},
>>> + {11025, 0x4},
>>> + {12000, 0x4},
>>> + {32000, 0x1},
>>> + {16000, 0x3},
>>> + {8000, 0x5},
>>> + };
>>> +
>>> + /* DMIC num is N+1 */
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_CH_NUM,
>>> + SUN50I_DMIC_CH_NUM_N_MASK,
>>> + SUN50I_DMIC_CH_NUM_N(channels - 1));
>>> + host->chan_en = (1 << channels) - 1;
>>> + regmap_write(host->regmap, SUN50I_DMIC_HPF_CTRL, host->chan_en);
>>> +
>>> + switch (params_format(params)) {
>>> + case SNDRV_PCM_FORMAT_S16_LE:
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL,
>>> + SUN50I_DMIC_RXFIFO_CTL_MODE,
>>> + SUN50I_DMIC_RXFIFO_CTL_MODE);
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL,
>>> + SUN50I_DMIC_RXFIFO_CTL_RESOLUTION, 0);
>>> + break;
>>> + case SNDRV_PCM_FORMAT_S24_LE:
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL,
>>> + SUN50I_DMIC_RXFIFO_CTL_MODE, 0);
>>
>> In SNDRV_PCM_FORMAT_S24_LE, the sample is in the three least significant
>> bytes, so wouldn't we want to still use mode 1 here? To me, mode 0 only
>> makes sense when using SNDRV_PCM_FORMAT_S32_LE.
>>
>
> I don't understand. The DMIC does not support 32bits, why use
> SNDRV_PCM_FORMAT_S32_LE ?

The hardware supports extending the samples to 32 bits. So if userspace
wants 32-bit samples (for whatever reason), it is more efficient to do
the extension in hardware than in software. You do not need to add
support for SNDRV_PCM_FORMAT_S32_LE; the driver will work fine without it.

But this is unrelated to the fact that mode 0 is wrong for
SNDRV_PCM_FORMAT_S24_LE.

SNDRV_PCM_FORMAT_S16_LE => samples must be in 2 lower bytes.
Mode 1 does this. The upper 2 bytes are ignored.

SNDRV_PCM_FORMAT_S24_LE => samples must be in 3 lower bytes.
Mode 1 does this. The 21-bit sample is extended with 3 zeroes.

In fact, since only 21 bits in the 24-bit sample are meaningful, you
should set the sig_bits field in the DAI driver so userspace can know.

(Does it make sense that extending 21 -> 24 bits to fit in a standard
PCM format serves the same purpose as extending 21 -> 32 bits?)

>>
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL,
>>> + SUN50I_DMIC_RXFIFO_CTL_RESOLUTION,
>>> + SUN50I_DMIC_RXFIFO_CTL_RESOLUTION);
>>> + break;
>>> + default:
>>> + dev_err(&pdev->dev, "Invalid format!\n");
>>
>> The calls to dev_err() can use cpu_dai->dev. Then you don't need to keep
>> a pointer to pdev in the driver data.
>>
>>> + return -EINVAL;
>>> + }
>>> +
>>> + for (i = 0; i < ARRAY_SIZE(dmic_rate_s); i++) {
>>> + if (dmic_rate_s[i].samplerate == rate) {
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_SR,
>>> + SUN50I_DMIC_SR_SAMOLE_RATE_MASK,
>>> +
>> SUN50I_DMIC_SR_SAMOLE_RATE(dmic_rate_s[i].rate_bit));
>>> + break;
>>> + }
>>> + }
>>> + if (i == ARRAY_SIZE(dmic_rate_s)) {
>>> + dev_err(&pdev->dev, "Invalid rate!\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + /* oversamplerate adjust */
>>> + if (params_rate(params) >= 24000)
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_CTL,
>>> + SUN50I_DMIC_CTL_OVERSAMPLE_RATE,
>>> + SUN50I_DMIC_CTL_OVERSAMPLE_RATE);
>>> + else
>>> + regmap_update_bits(host->regmap, SUN50I_DMIC_CTL,
>>> + SUN50I_DMIC_CTL_OVERSAMPLE_RATE, 0);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int sun50i_dmic_trigger(struct snd_pcm_substream *substream, int
>> cmd,
>>> + struct snd_soc_dai *dai)
>>> +{
>>> + int ret = 0;
>>> + struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(dai);
>>> +
>>> + if (substream->stream != SNDRV_PCM_STREAM_CAPTURE)
>>> + return -EINVAL;
>>> +
>>> + switch (cmd) {
>>> + case SNDRV_PCM_TRIGGER_START:
>>> + case SNDRV_PCM_TRIGGER_RESUME:
>>> + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
>>> + sun50i_snd_rxctrl_enable(substream, host, true);
>>> + break;
>>> +
>>> + case SNDRV_PCM_TRIGGER_STOP:
>>> + case SNDRV_PCM_TRIGGER_SUSPEND:
>>> + case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
>>> + sun50i_snd_rxctrl_enable(substream, host, false);
>>> + break;
>>> +
>>> + default:
>>> + ret = -EINVAL;
>>> + break;
>>> + }
>>> + return ret;
>>> +}
>>> +
>>> +static int sun50i_dmic_set_sysclk(struct snd_soc_dai *dai, int clk_id,
>>> + unsigned int freq, int dir)
>>> +{
>>> + struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(dai);
>>> +
>>> + if (clk_set_rate(host->dmic_clk, freq)) {
>>
>> Currently, mainline does not have any sunxi-specific machine drivers. We
>> are using simple-audio-card for sun50i. And asoc_simple_hw_params() only
>> calls .set_sysclk if mclk-fs is set to some fixed value, from the device
>> tree. However, for sunxi, mclk-fs cannot be a fixed value, because
>> sysclk is the same 22/24 MHz regardless of sample rate. So .set_sysclk
>> will never be called.
>>
>> So for now I would suggest calling clk_set_rate() from .hw_params, using
>> something like sun8i_codec_get_sysclk_rate() to get the right frequency.
>>
>
> Thanks, i will do it
>
>>
>>> + dev_err(dai->dev, "Freq : %u not support\n", freq);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int sun50i_dmic_soc_dai_probe(struct snd_soc_dai *dai)
>>> +{
>>> + struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(dai);
>>> +
>>> + snd_soc_dai_init_dma_data(dai, NULL, &host->dma_params_rx);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static const struct snd_soc_dai_ops sun50i_dmic_dai_ops = {
>>> + .startup = sun50i_dmic_startup,
>>> + .trigger = sun50i_dmic_trigger,
>>> + .hw_params = sun50i_dmic_hw_params,
>>> + .set_sysclk = sun50i_dmic_set_sysclk,
>>> +};
>>> +
>>> +static const struct regmap_config sun50i_dmic_regmap_config = {
>>> + .reg_bits = 32,
>>> + .reg_stride = 4,
>>> + .val_bits = 32,
>>> + .max_register = SUN50I_DMIC_VERSION,
>>> + .cache_type = REGCACHE_NONE,
>>> +};
>>> +
>>> +#define SUN50I_DMIC_RATES (SNDRV_PCM_RATE_8000_48000 |
>> SNDRV_PCM_RATE_KNOT)
>>
>> If you use SNDRV_PCM_RATE_KNOT, you also need to provide a list of
>> sample rates as a constraint in .startup.
>>
>>> +#define SUN50I_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |
>> SNDRV_PCM_FMTBIT_S24_LE)
>>> +
>>> +static struct snd_soc_dai_driver sun50i_dmic_dai = {
>>> + .capture = {
>>> + .channels_min = 1,
>>> + .channels_max = 8,
>>> + .rates = SUN50I_DMIC_RATES,
>>> + .formats = SUN50I_FORMATS,

".sig_bits = 21," should go here.

Regards,
Samuel

>>> + },
>>> + .probe = sun50i_dmic_soc_dai_probe,
>>> + .ops = &sun50i_dmic_dai_ops,
>>> + .name = "dmic",
>>> +};
>>> +
>>> +static const struct of_device_id sun50i_dmic_of_match[] = {
>>> + {
>>> + .compatible = "allwinner,sun50i-h6-dmic",
>>> + },
>>> + { /* sentinel */ }
>>> +};
>>> +MODULE_DEVICE_TABLE(of, sun50i_dmic_of_match);
>>> +
>>> +static const struct snd_soc_component_driver sun50i_dmic_component = {
>>> + .name = "sun50i-dmic",
>>> +};
>>> +
>>> +static int sun50i_dmic_runtime_suspend(struct device *dev)
>>> +{
>>> + struct sun50i_dmic_dev *host = dev_get_drvdata(dev);
>>> +
>>> + clk_disable_unprepare(host->dmic_clk);
>>> + clk_disable_unprepare(host->apb_clk);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int sun50i_dmic_runtime_resume(struct device *dev)
>>> +{
>>> + struct sun50i_dmic_dev *host = dev_get_drvdata(dev);
>>> + int ret;
>>> +
>>> + ret = clk_prepare_enable(host->dmic_clk);
>>> + if (ret)
>>> + return ret;
>>> + ret = clk_prepare_enable(host->apb_clk);
>>> + if (ret)
>>> + clk_disable_unprepare(host->dmic_clk);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static int sun50i_dmic_probe(struct platform_device *pdev)
>>> +{
>>> + struct sun50i_dmic_dev *host;
>>> + struct resource *res;
>>> + int ret;
>>> + void __iomem *base;
>>> +
>>> + host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
>>> + if (!host)
>>> + return -ENOMEM;
>>> +
>>> + host->pdev = pdev;
>>> +
>>> + /* Get the addresses */
>>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> + base = devm_ioremap_resource(&pdev->dev, res);
>>> + if (IS_ERR(base))
>>> + return dev_err_probe(&pdev->dev, PTR_ERR(base),
>>> + "get resource failed.\n");
>>> +
>>> + host->regmap = devm_regmap_init_mmio(&pdev->dev, base,
>>> +
>> &sun50i_dmic_regmap_config);
>>> +
>>> + /* Clocks */
>>> + host->apb_clk = devm_clk_get(&pdev->dev, "apb");
>>> + if (IS_ERR(host->apb_clk))
>>> + return dev_err_probe(&pdev->dev, PTR_ERR(host->apb_clk),
>>> + "failed to get apb clock.\n");
>>> +
>>> + host->dmic_clk = devm_clk_get(&pdev->dev, "dmic");
>>> + if (IS_ERR(host->dmic_clk))
>>> + return dev_err_probe(&pdev->dev, PTR_ERR(host->dmic_clk),
>>> + "failed to get dmic clock.\n");
>>> +
>>> + host->dma_params_rx.addr = res->start + SUN50I_DMIC_DATA;
>>> + host->dma_params_rx.maxburst = 8;
>>> + host->dma_params_rx.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
>>
>> This needs to be DMA_SLAVE_BUSWIDTH_4_BYTES if you are using larger than
>> 16-bit samples. See for example sun4i_i2s_hw_params().
>>
>> Regards,
>> Samuel
>>
>

\
 
 \ /
  Last update: 2021-06-19 21:52    [W:0.115 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site