lkml.org 
[lkml]   [2021]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFCv1 0/8] Meson-8b and Meson-gxbb USB phy code re-structure
Date
On Odroid C1+ and Odroid C2 USB feature is broken
this code changes are just re-structure the code so that
proper callback function execute in proper order.

Code changes losely based on phy-meson-gxl-usb2.c

Initially if we connect USB HDD at initial boot it get detected.
but after that usb hotplug of USB HDD is broken.
I did not observe and USB debug events messages to trace the root cause.

Another issue I observed is increase of USB interrupts event
even if there is not much activity on USB ports.
I tried some clk changes but it did not workout for me.

$ cat /proc/interrupts | grep usb
45: 0 0 0 0 GICv2 62 Level c9000000.usb, dwc2_hsotg:usb1
46: 17488032 0 0 0 GICv2 63 Level c9100000.usb, dwc2_hsotg:usb2

Thanks
-Anand

Anand Moon (8):
phy: amlogic: meson8b-usb2: Use clock bulk to get clocks for phy
phy: amlogic: meson8b-usb2: Use phy init callback function
phy: amlogic: meson8b-usb2: Use phy exit callback function
phy: amlogic: meson8b-usb2: Use phy set_mode callback function
phy: amlogic: meson8b-usb2: Reorder phy poweroff callback function
phy: amlogic: meson8b-usb2: Use phy reset callback function
phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset
mode.
phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER

drivers/phy/amlogic/phy-meson8b-usb2.c | 159 +++++++++++++++++--------
1 file changed, 109 insertions(+), 50 deletions(-)

--
2.31.1

\
 
 \ /
  Last update: 2021-06-17 21:42    [W:0.177 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site