lkml.org 
[lkml]   [2021]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 5/5] arm64: dts: qcom: sa8155p-adp: Add base dts file
Date
Add base DTS file for SA8155p Automotive Development Platform.
It enables boot to console, adds tlmm reserved range and ufs flash.
It also includes pmic file.

SA8155p-adp board is based on sa8155p Qualcomm Snapdragon SoC.
SA8155p platform is similar to the SM8150, so use this as base
for now.

Cc: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 360 +++++++++++++++++++++++
2 files changed, 361 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sa8155p-adp.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 456502aeee49..666f3528697d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
new file mode 100644
index 000000000000..86bfbd29cda0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pmm8155au_1.dtsi"
+#include "pmm8155au_2.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SA8155P ADP";
+ compatible = "qcom,sa8155p-adp", "qcom,sa8155p";
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vreg_3p3: vreg_3p3_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_3p3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /*
+ * S4A is always on and not controllable through RPMh.
+ * So model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: smps4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-set-load;
+
+ vin-supply = <&vreg_3p3>;
+ };
+};
+
+&apps_rsc {
+ pmm8155au-1-rpmh-regulators {
+ compatible = "qcom,pmm8155au-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vreg_3p3>;
+ vdd-s2-supply = <&vreg_3p3>;
+ vdd-s3-supply = <&vreg_3p3>;
+ vdd-s4-supply = <&vreg_3p3>;
+ vdd-s5-supply = <&vreg_3p3>;
+ vdd-s6-supply = <&vreg_3p3>;
+ vdd-s7-supply = <&vreg_3p3>;
+ vdd-s8-supply = <&vreg_3p3>;
+ vdd-s9-supply = <&vreg_3p3>;
+ vdd-s10-supply = <&vreg_3p3>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>;
+ vdd-l2-l10-supply = <&vreg_3p3>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>;
+ vdd-l6-l9-supply = <&vreg_s6a_0p92>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+ vreg_s5a_2p04: smps5 {
+ regulator-name = "vreg_s5a_2p04";
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6a_0p92: smps6 {
+ regulator-name = "vreg_s6a_0p92";
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_l1a_0p752: ldo1 {
+ regulator-name = "vreg_l1a_0p752";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_usb_hs_3p1:
+ vreg_l2a_3p072: ldo2 {
+ regulator-name = "vreg_l2a_3p072";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p8: ldo3 {
+ regulator-name = "vreg_l3a_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_usb_hs_core:
+ vdda_usb_ss_dp_core_1:
+ vreg_l5a_0p88: ldo5 {
+ regulator-name = "vreg_l5a_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-name = "vreg_l7a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_2p96: ldo10 {
+ regulator-name = "vreg_l10a_2p96";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l11a_0p8: ldo11 {
+ regulator-name = "vreg_l11a_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_usb_hs_1p8:
+ vreg_l12a_1p8: ldo12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_2p7: ldo13 {
+ regulator-name = "vreg_l13a_2p7";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p7: ldo15 {
+ regulator-name = "vreg_l15a_1p7";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-name = "vreg_l16a_2p7";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_2p96: ldo17 {
+ regulator-name = "vreg_l17a_2p96";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pmm8155au-2-rpmh-regulators {
+ compatible = "qcom,pmm8155au-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vreg_3p3>;
+ vdd-s2-supply = <&vreg_3p3>;
+ vdd-s3-supply = <&vreg_3p3>;
+ vdd-s4-supply = <&vreg_3p3>;
+ vdd-s5-supply = <&vreg_3p3>;
+ vdd-s6-supply = <&vreg_3p3>;
+ vdd-s7-supply = <&vreg_3p3>;
+ vdd-s8-supply = <&vreg_3p3>;
+ vdd-s9-supply = <&vreg_3p3>;
+ vdd-s10-supply = <&vreg_3p3>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>;
+ vdd-l2-l10-supply = <&vreg_3p3>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>;
+ vdd-l6-l9-supply = <&vreg_s6c_1p128>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>;
+ vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+ vreg_s4c_1p352: smps4 {
+ regulator-name = "vreg_s4c_1p352";
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5c_2p04: smps5 {
+ regulator-name = "vreg_s5c_2p04";
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6c_1p128: smps6 {
+ regulator-name = "vreg_s6c_1p128";
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_l1c_1p304: ldo1 {
+ regulator-name = "vreg_l1c_1p304";
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p808: ldo2 {
+ regulator-name = "vreg_l2c_1p808";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p2: ldo5 {
+ regulator-name = "vreg_l5c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7c_1p8: ldo7 {
+ regulator-name = "vreg_l7c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p2: ldo8 {
+ regulator-name = "vreg_l8c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-name = "vreg_l10c_3p3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_0p8: ldo11 {
+ regulator-name = "vreg_l11c_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p808: ldo12 {
+ regulator-name = "vreg_l12c_1p808";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c_2p96: ldo13 {
+ regulator-name = "vreg_l13c_2p96";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15c_1p9: ldo15 {
+ regulator-name = "vreg_l15c_1p9";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16c_3p008: ldo16 {
+ regulator-name = "vreg_l16c_3p008";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18c_0p88: ldo18 {
+ regulator-name = "vreg_l18c_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l10a_2p96>;
+ vcc-max-microamp = <750000>;
+ vccq-supply = <&vreg_l5c_1p2>;
+ vccq-max-microamp = <700000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8c_1p2>;
+ vdda-max-microamp = <87100>;
+ vdda-pll-supply = <&vreg_l5a_0p88>;
+ vdda-pll-max-microamp = <18300>;
+};
+
+
+&usb_1_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vdd_usb_hs_core>;
+ vdda33-supply = <&vdda_usb_hs_3p1>;
+ vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l8c_1p2>;
+ vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
--
2.31.1
\
 
 \ /
  Last update: 2021-06-17 07:46    [W:0.785 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site