lkml.org 
[lkml]   [2021]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/3] drm/vc4: hdmi: Make sure the controller is powered in detect
On Tue, 25 May 2021 at 10:11, Maxime Ripard <maxime@cerno.tech> wrote:
>
> If the HPD GPIO is not available and drm_probe_ddc fails, we end up
> reading the HDMI_HOTPLUG register, but the controller might be powered
> off resulting in a CPU hang. Make sure we have the power domain and the
> HSM clock powered during the detect cycle to prevent the hang from
> happening.
>
> Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

> ---
> drivers/gpu/drm/vc4/vc4_hdmi.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> index 867009a471e1..4b6857467e58 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -166,6 +166,8 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
> struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
> bool connected = false;
>
> + WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev));
> +
> if (vc4_hdmi->hpd_gpio) {
> if (gpio_get_value_cansleep(vc4_hdmi->hpd_gpio) ^
> vc4_hdmi->hpd_active_low)
> @@ -187,10 +189,12 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
> }
> }
>
> + pm_runtime_put(&vc4_hdmi->pdev->dev);
> return connector_status_connected;
> }
>
> cec_phys_addr_invalidate(vc4_hdmi->cec_adap);
> + pm_runtime_put(&vc4_hdmi->pdev->dev);
> return connector_status_disconnected;
> }
>
> --
> 2.31.1
>

\
 
 \ /
  Last update: 2021-06-16 12:52    [W:0.365 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site