lkml.org 
[lkml]   [2021]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/2] MCAN: Add support for implementing transceiver as a phy
On 14.06.2021 18:02:53, Aswath Govindraju wrote:
> Hi Marc,
>
> On 10/05/21 10:55 am, Aswath Govindraju wrote:
> > The following series of patches add support for implementing the
> > transceiver as a phy of m_can_platform driver.
> >
> > TCAN1042 has a standby signal that needs to be pulled high for
> > sending/receiving messages[1]. TCAN1043 has a enable signal along with
> > standby signal that needs to be pulled up for sending/receiving
> > messages[2], and other combinations of the two lines can be used to put the
> > transceiver in different states to reduce power consumption. On boards
> > like the AM654-idk and J721e-evm these signals are controlled using gpios.
> >
> > These gpios are set in phy driver, and the transceiver can be put in
> > different states using phy API. The phy driver is added in the series [3].
> >
> > This patch series is dependent on [4].
> >
>
> [4] is now part of linux-next
>
> > [4] - https://lore.kernel.org/patchwork/patch/1413286/
>
> May I know if this series is okay to be picked up ?

As soon as this hits net-next/master I can pick up this series.

Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-06-16 11:18    [W:0.117 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site